• 대한치과보철학회지
• /
• 제36권4호
• /
• pp.533-548
• /
• 1998

The purpose of this study was to investigate the influence of balancing interference on the mandibular movement and masticatory muscle activity. 5 subjects(male. average age of 24.3) without dysfuction in masticatory system were selected. The balancing interference was provided by construction of cast metal crown and onlay on the upper and lower first molars. Clinical examination, changes displacement and velocity, and muscle activity were recorded and analyzed by means of BioPak system(Bioresearch Inc., Milwaukee Wisconsin. USA). The results were as follows ; 1. In clinical examination, various symptoms were reported by all subjects after application of interference. Almost symptoms were subsided after elimination of interference. 2. In the border movements in frontal plane, lateral border movement toward non-interference side was changed according to the interference after application of interference. Immediately after removal of interference, border movements' pattern was recovered as same as before experiment. 3. During gum chewing on the non-interference side, horizontal movement was decreased immediately after application of interference(p<0.05). 1 week after application of interference, horizontal movement was more decreased in 3 subjects and showed a chopping type masticatory stroke. But in 2subjects, horizontal movement was increased to avoid interference. 4. In EMG of the mandibular rest position, no significant changes were showed in the experiment period(p>0.05). 5. During gum chewing on the interference side, the activity of opposite temporal muscle was increased immediately after application of interference(p<0.05). 1 week after application of interference. The activity of ipsilateral temporal muscle and left and right masseter muscles was increased (p<0.05). 1 week after elimination of interference, increased muscle activity was recovered about the same level as before experiment. 6. During gum chewing on the non-interference side, 1 week after application of interference, the activity of ipsilateral temporal muscle was increased (p<0.05). 1 week after elimination of interference. increased muscle activity was returned about the same level as before experiment.

• 한국정밀공학회지
• /
• 제15권12호
• /
• pp.113-119
• /
• 1998

Recently Electronic Speckle Pattern Interferometry(ESPI) has been studied because it has the advantages to be able to measure the whole-field surface deformations of engineering components and materials in industrial areas with noncontact. The speckle patterns to be formed with interference phenomena of scattering light from rough surfaces illuminated by laser light have phase informations of surface deformations. In this study we used this interference phenomena and the phase shifting method to measure the inplane deformations, together with the use of digital image equipment to process the informations contained in the speckle pattern and to display consequent interferograms on TV monitor. FEA was performed before experiments and we obtained good agreement between the experimental results and FEA.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.91-95
• /
• 1997

ESPI(Electronic Speckle Pattern Interferometry) is new optical measuring method to be able to measure the surface deformations of engineering components and materials in industrial areas. Conventional measuring method of surface deformation such as the strain gauge have many demerits because it is contact and point-to-point measuring one. But ESPI that is non-contact, whole field measuring method can overcome previous disadvantages. The speckle pattern to be formed with interference phenomena of scattering light from rough surfaces illuminated by laser light have phase information of surface In this study we used this interference phenomena and the phase shifting method to measure the in- plane deformation, together with the use of digital equipment to process the information contained in the speckle pattern and to display consequent inter ferograms. Finally we obtained good agreement between the experimenta results and those of FEM..

• 한국정밀공학회지
• /
• 제15권4호
• /
• pp.98-104
• /
• 1998

Recently. a new technique called Electronic Speckle Pattern Interferometry(ESPI) has been developed to overcome the drawbacks of existing holography. This technique enable real-time interference fringes to be displayed directly on TV monitor without recourse to any form of photographic processing. This research was carried out for the purpose of applying the vibration analysis method employing Electronic Speckle Pattern Interference technique to the vibration analysis of uniform rectangular cantilever plate. The natural vibration frequencies found by ESPI were in fair agreement with theoretical eigen frequencies acquired using theoretical formula G. B. Warburton proposed.

• 전자공학회논문지
• /
• 제52권6호
• /
• pp.32-40
• /
• 2015

본 논문에서는 무인항공기에 탑재된 안테나 간의 간섭을 고려한 안테나 최적 위치 분석에 대해서 서술하였다. 분석은 전방향성 안테나들 중 운용 주파수 대역이 인접하고, 상호 간 이격거리가 가까운 곳에 위치한 안테나들을 선정하여 수행하였다. 분석을 수행한 안테나는 제어용 데이터링크, TCAS(Traffic Collision & Avoidance System), IFF(Identification Friend or Foe), GPS(Global Positioning System)와 RALT(Radar ALTimeter) 안테나들이다. 안테나 최적 위치 분석은 세 단계로 구분된다. 첫 번째 단계는 안테나 용도, 형상 및 방사패턴을 고려한 안테나 초기 위치 선정 후 안테나 장착 시 무인항공기 구조물에 의한 안테나 방사패턴과 반사손실 특성 변화를 관찰하여 최적의 특성을 갖는 지점을 선정하는 것이다. 두 번째 단계는 안테나 간의 결합특성과 송신 안테나의 불요파 세기 및 수신 안테나의 최저수신감도를 고려하여 안테나 간 간섭 정도를 분석하는 것이다. 간섭이 발생할 경우, 간섭이 미발생하는 최소이격거리를 분석하여 간섭이 발생하지 않는 최적 위치를 선정한다. 마지막 단계는 안테나 간 추가 거리 이격으로도 간섭이 제거되지 않을 경우, 안테나 간 주파수 이격 분석을 통한 주파수 간섭 대책을 확정하는 것이다. 이러한 분석 과정은 개발단계에서 안테나 간 간섭을 예측하여 간섭이 발생하지 않는 안테나 최적 위치 선정에 유용하게 사용된다.

• 정보통신설비학회논문지
• /
• 제8권1호
• /
• pp.18-23
• /
• 2009

The conventional channel selection method for a ZigBee communication network basically detects the energy values in all channels. In the ISM band, no license is required to use channels in this band, so there may exist various interference factors in this band. It is well known that WLAN is the major interference factor degrading the performance of ZigBee in the ISM band. In this paper, we propose an efficient channel selection algorithm which uses the pattern of two types of WLAN channel uses as the a priori information of IEEE 802.11 band IEEE 802.11g. By using the proposed algorithm, we may save the time required to select channels for the ZigBee communications.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.714-718
• /
• 1996

The interference phenomenonof a dynamic crack propagation in a inclined DEN(double edge notched) specimen has been investigated by using the dynamic photoelasticity. One crack initiated by static loading is propagated dynamically and experiences a mixed mode condition(interference) as the crack approaches to the inclined edge notch. We use the overdeterministic least-square method to extract dynamic $K_{Id}$ K sub IId/and .sigma. $_{ox}$from the recorded dynamic photoelastic pattern surounding a running crack. The evaluated $K_{Id}$ $K_{IId}$and .sigma. $_{ox}$together with the crack propagation velocity estimate the dynamic crack interference phenomenonenonon

• Journal of the Optical Society of Korea
• /
• 제15권2호
• /
• pp.128-131
• /
• 2011

After the successful extension of the rotating planar waveguide model to Wave Optics, where a clear identification between the angular velocity of one hypothetical waveguide and the phase differences between two points on the path of one bounded mode was found, an application of the model to explain the interference theory is presented. We demonstrate that, for two bounded modes to create an interference pattern, a constrain to the relative parameters among both is imposed by the fiber optics. This result, not reported in the literature up to date, provides a new horizon to understand the interaction light-light when propagated within optical fibers.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제9권2호
• /
• pp.127-134
• /
• 2017

Vortex Induced Vibration (VIV) is a typical flow-structure interference phenomenon which causes an unsteady flow pattern due to vortex shedding at or near the structure's natural frequency leading to resonant vibrations. VIV may cause premature fatigue failure of marine risers and pipelines. A test model was carried out to investigate the role of a stationary fairing by varying the caudal horn angle to suppress riser VIV taking into account the effect of wake interference. The test results show significant reduction of VIV for risers disposed in tandem and side-by-side. In general, fairing with a caudal horn of $45^{\circ}$ and $60^{\circ}$ are efficient in quelling VIV in risers. The results also reveal fairing can reduce the drag load of risers arranged side-by-side. For the tandem configuration, a fairing can reduce the drag load of an upstream riser, but will enlarge the drag force of the downstream riser.

• 한국컴퓨터정보학회논문지
• /
• 제15권5호
• /
• pp.75-81
• /
• 2010

적응 배열 안테나 시스템은 간섭신호 방향으로 영점을 형성하여 표적신호를 추정한다. 그러나 적응 배열 안테나 시스템에 상관성 간섭신호가 입사된다면 표적신호를 간섭신호로 간주하여 시스템의 성능이 급격히 감소되고, 지향 오차에 민감하여 주빔이 표적신호의 입사방향을 지향하지 못한다. 본 논문에서는 고차제한조건과 지향오차수정방법을 결합하여 빔형성 알고리즘을 제안하였다. 그리고 제안한 알고리즘으로 자유도 손실을 최소화하고 간섭신호와 지향오차를 감소시켰다. 모의실험을 이용하여 제안 알고리즘과 기존 알고리즘의 성능을 비교 분석하였다. 본 논문에서 제안한 알고리즘은 신호 입사각을 정확히 추정하지만 기존의 알고리즘은 약 $0.8^{\circ}$의 오차가 발생하였다.