• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.2
• /
• pp.54-67
• /
• 2000

It is known that the performance of a DS-CDMA system mainly depends on Multiple Access Interference(MAI). The effect of MAI in a reverse link is larger than that of a forward link because of the absence of orthogonality among mobile stations. In this paper we investigate the effect of synchronous transmission in the reverse link, which is compared to the performance of asynchronous transmission in the reverse link. In addition, we consider the effect of interference from Mobile Stations(MSs) in a hand-over region. That is, if we assume that a MS is moving from a serving base station(sowing BS) to a target base station(target BS), the signal of the MS is not orthogonal with the signals of all other MSs within the target BS because the MS is only synchronized with the serving BS. Finally we suggest an interference cancellation scheme to reduce the interference from MSs in the region of hand-over, which can be one of solutions for the capacity degradation due to interference from the MSs in the hand-over region in reverse link synchronous transmission.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.6
• /
• pp.1080-1082
• /
• 2016

In a multi-hop CR (Cognitive Radio) network, each node find a path to destination node through several links. If links have the same frequency channel, there can be a serious interference among the links and it can reduce the network capacity. In multi-channel CR networks, each channel has different capacity according to the inter-link interference, and each channel has different traffic properties of primary users. In this paper, we propose channel scheduling scheme to minimize channel interferences and collision with primary users. Simulation results show the improvement of channel capacity and collision rate with primary users.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.4
• /
• pp.1679-1691
• /
• 2016

Successive interference cancellation (SIC) is an effective means of multi-packet reception to combat interference at the physical layer. We investigate the joint optimization issue of channel access and power control for capacity maximization in SIC-enabled wireless networks. We propose a new interference model to characterize the sequential detection nature of SIC. Afterward, we formulize the joint optimization problem, prove it to be a nondeterministic polynomial-time-hard problem, and propose a novel approximation approach based on the genetic algorithm (GA). Finally, we discuss the design and parameter setting of the GA approach and validate its performance through extensive simulations.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.5
• /
• pp.1240-1255
• /
• 1996

This paper suggests power optimization technique in multi-level SCPC system as a method for efficient utilization of limited satellite power. The power optimization is realized by optimal assignment of satellite input carrier powers considering interference and noise generated in up-link and down-link. The Fletcher-Powell algorithm searching minimum(or maximum) point using gradient information is used to detemine the optimal input carrier powers. To apply Flectcher-Powell algorithm mathematical descriptions and their partial derivatives to interference and nose are presented. Because a target, which should be optimized, is satellite input carrier power, amplitude of each carrier group will be assumed to be an independent variable. The performance criterion for optimal power assignmentis classified into 4 categories with respect to CNR of destination receiver earth station to meet the requirement for various satellite link environment. Simulation results for two-level, four-level and six-level SCPC system are presented.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.1
• /
• pp.60-68
• /
• 1998

Parallel link manipulators have an ability of more precise positioning than serial open-loop manipulators. However. general parallel link manipulators have been restricted to the real applications since they have limited workspace due to interference among actuators. In this study, we suggest a closed-loop manipulator with 6 degrees-of-freedom and with enlarged workspace. It consists of two parts for minimizing the interference among actuators. One part is lower structure with planar 3 degrees-of-freedom and the other is upper one with spatial 3 degrees-of-freedom. Forward kinematics and inverse kinematics are solved, research about singularity points are carried out and workspace is evaluated. The comparison of workspace between Stewart platform, which is the typical parallel link manipulator, and the suggested manipulator shows that the workspace of the latter is wider than that of the former. Especially, simulation results also show that the suggested manipulator is more suitable when there needs rotation in the end-effector.

• Journal of Information Processing Systems
• /
• v.8 no.1
• /
• pp.1-20
• /
• 2012

The most important criterion for achieving the maximum performance in a wireless mesh network (WMN) is to limit the interference within the network. For this purpose, especially in a multi-radio network, the best option is to use non-overlapping channels among different radios within the same interference range. Previous works that have considered non-overlapping channels in IEEE 802.11a as the basis for performance optimization, have considered the link quality across all channels to be uniform. In this paper, we present a measurement-based study of link quality across all channels in an IEEE 802.11a-based indoor WMN test bed. Our results show that the generalized assumption of uniform performance across all channels does not hold good in practice for an indoor environment and signal quality depends on the geometry around the mesh routers.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.11a
• /
• pp.869-870
• /
• 2010

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.3
• /
• pp.395-402
• /
• 2003

The capacity of a CDMA cellular system is determined by the amount of interference, therefore the exact estimation of interference is important to evaluate the system performance. In this paper, we propose an approximated equation which calculates reverse link other cell interference in the CDMA cellular systems. The equation using Riemann-Zeta function has a property that it is useful in case of any radio propagation loss exponents. And we compare calculation results with simulation results in other to verify it's usefulness. The upper bound of system capacity calculated with the proposed approximated equation gives almost alike result with the simulation. The proposed interference bound is useful to calculate system capacity and to evaluate some algorithm in a hierarchical cellular system which must be considered various propagation exponents.

• KIPS Transactions on Computer and Communication Systems
• /
• v.5 no.5
• /
• pp.103-108
• /
• 2016

In this paper, we propose a resource allocation scheme that guarantees transmission rate for each mobile stations by mitigating interference between a base station-to-mobile station link and a relay station-to-mobile station link. Specifically, we dynamically adjust the boundary between access zone and relay zone using signal to interference plus noise ratio. Moreover, we cluster the mobile stations under sever interference and manage the channel quality of these mobile stations by allocating additional radio resource. Our simulation results show that the proposed scheme can improve the efficiency of radio resources and ensure fairness among mobile stations.

• Proceedings of the IEEK Conference
• /
• 2001.06a
• /
• pp.353-356
• /
• 2001

In WCDMA systems, it is difficult to use high level modulation schemes in Rayleigh fading channel. Components of Multipath interference give signals much inteferences. Multipath interference cancellation is one of the method to overcome this problem. In this paper, multistage PIC algorithm is used to verify a performance of multipath interference cancellation. It is algorithm gradually canceling the multipath interferences as a stage number is increases. In computer simulations, it is verified that multipath interference cancelation is necessary and using its algorithm give much better performances than not using.