• Journal of Communications and Networks
• /
• 제1권2호
• /
• pp.118-133
• /
• 1999

In this paper we compare linear and non-linear inter-ference cancellation for systems employing code division multi-ple access (CDMA) techniques. Specifically, we examine linear and non-linear parallel interference cancellation(also called multi-stage cancellation) in relationship to other multiuser detection al-gorithms. We show the explicit relationship between parallel inter-ference cancellation and the decorrelator (or direct matrix inver-sion). This comparison gives insight into the performance of paral-lel interference cancellation (PIC) and leads to vetter approaches. We also show that non-linear PIC approaches with explicit chan-nel setimation can provide performance improvement over linear PIC, especially when using soft non-linear symbol estimates. The application of interference cancellation to non-linear modulation techniques is also presented along with a discussion on minimum mean-squared error(MMSE) symbol estimation techniques. These are shown to further improve the performance of parallel cancella-tion.

• 한국통신학회논문지
• /
• 제30권6C호
• /
• pp.560-569
• /
• 2005

본 논문은 순차적인 간섭제거와 전송 안테나 별 전송률을 제어하는 공간 다중화 전송 MIMO 시스템에서 채널환경에 따라 전송에 사용되는 안테나를 선택하고 데이터 율을 조절하는 알고리즘을 제안한다. 수신기에서 전송에 사용될 송신 안테나 및 전송률을 결정하고, 이는 각 송신 안테나 별 전송률에 대한 피드백 채널을 통해 송신기로 전송된다. 본 연구에서는 각 단계에서 최소의 SINR을 가지는 안테나를 제거해가는 연속적인 단계들로 이루어진 직렬 결정 방식을 제안한다. 또한, 각 연속적인 심볼 추정 단계에서 가장 낮은 신호 대 간섭 비를 갖는 심볼을 먼저 추정하는 "reverse detection ordering"이 각 안테나에 할당되는 용량 차이를 증가시킴으로서 안테나 선택에 의한 이득을 증가시킴을 보인다. 시뮬레이션 결과는 제안된 "reverse detection ordering"을 기반으로 하는 직렬 결정 방식이 낮은 복잡도을 가지면서 heuristic 방식과 비슷한 용량을 제공함을 보여준다.

• 센서학회지
• /
• 제13권2호
• /
• pp.85-89
• /
• 2004

This paper represents the development of high sensitivity photo-sensor for the fluorescence detection in the integrated biological analysis system. The finger-type PIN photodiodes were fabricated as the photo-sensor, and had a high sensitivity ($I_{light}/I_{dark}$ = 8720). The interference filter consisted of $TiO_{2}$ and $SiO_{2}$ was directly deposited on the photodiodes. Deposited filter with 95.5% reflection under 532 nm and 98% transmission over 580 nm exceedingly decreased the magnitude of background signal in the detection. The PDMS micro-fluidic channels are bonded on the photodiode by $O_{2}$ plasma treatment. The detection current was proportional to two primary parameters (light intensity, concentration), and the on-chip detection system could detect fluorescence signals down to 100 nM concentration (LOD = Limit of detection of rhodamine).

• 한국통신학회논문지
• /
• 제33권5C호
• /
• pp.351-360
• /
• 2008

주파수 재사용을 사용하는 셀룰러 시스템에서 단말은 셀 경계로 이동할수록 인접 셀로부터 오는 간섭 신호의 세기가 커지게 되어 낮은 신호 대 간섭 비를 갖게 되고 채널 추정 및 수신 성능이 열화되는 경향을 보인다. 각 셀에 할당된 프리앰블 파일럿이 상호 직교적인 관계이거나 disjoint한 위치에 있는 경우, 각 셀로부터의 채널을 추정하여 이를 간섭 제거에 활용할 수 있다. 도플러 확산에 의한 채널의 시간 변화율이 큰 경우에는 데이터 파일럿의 사용이 필요하나, 다수의 셀로부터 전송되는 데이터 파일럿이 모든 셀에서 동일한 위치에 배치되어 있는 경우, 간섭에 의한 영향으로 채널 추정 성능의 열화를 겪는다. 본 논문에서는 인접 셀 간섭의 영향을 고려한 의사 잡음(pseudonoise: PN) 수열이 적용된 데이터 심볼에서, 간섭 신호로 인한 성능 열화를 줄일 수 있는 채널 추정 방법을 설명하고, 셀 경계 지역에서 수신 신호 검출 성능을 평가한다. 특히 최대비 결합과 셀 간 공간 역다중화 검출 방식에 활용 시, 도플러 주파수와 간섭 신호의 세기에 따른 전송 효율을 산출하여 성능 이득을 정량적으로 제시한다.

• Journal of Communications and Networks
• /
• 제11권1호
• /
• pp.1-10
• /
• 2009

In this paper, we propose a chip-level detection and a spectral-slice scheme for the tunable-transmitter/fixed-receiver (TTFR)-based asynchronous spectral phase-encoded optical codedivision multiple-access (CDMA) system combined with timeencoding. The chip-level detection can enhance the tolerance of multiple access interference (MAI) because the channel collision does not occur as long as there is at least one weighted position without MAI. Moreover, the spectral-slice scheme can reduce the interference probability because the MAI with the different frequency has no adverse effects on the channel collision rate. As a result, these techniques mitigate channel collisions. We analyze the channel collision rate theoretically, and show that the proposed system can achieve a lower channel collision rate in comparison to both conventional systems with and without the time-encoding method.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 하계종합학술대회 논문집
• /
• pp.849-852
• /
• 1999

In this paper, the performance of DS/CDMA receiver is analyzed, which employs a cascaded interference canceller using a soft detection. The channels considered is characterized by the multipath fading which is one of the factors for the performance degradation in mobile communication systems. The idea behind the cancellation is that the co-channel interference can be regenerated at the receiver and is subtracted from the received signal. The numerical results show the improvement of BER can be obtained by the proposed cancellation scheme.

• Corrosion Science and Technology
• /
• 제19권5호
• /
• pp.265-280
• /
• 2020

External corrosion of buried pipes can be controlled using both coating and cathodic protection. However, deterioration of the coating can occur due to several reasons. The detection reliabilty of coating flaw detection methods is affected by interference such as metal objects connected to rectifiers and copper grids. When performing parallel direct current voltage gradient (DCVG) inspection, a sine wave form without potential reversal in voltage gradient appears in the area where the interference exists. However, this area may be not identified using existing methods. The objective of this study was to determine the effect of analyzing direction on the reliability of coating flaw detection of pipes buried in soil using a multi-electrode detector. DCVG on the buried pipe was measured along the buried pipe. This measurement parallel to the pipe was repeated. Measured data were analyzed for parallel, vertical, and diagonal directions. The reliability of coating flaw detection was improved by up to 46.4% compared to the conventional method.

• 한국통신학회논문지
• /
• 제27권3B호
• /
• pp.179-187
• /
• 2002

본 논문은 단위 셀 비동기 W-CBMA 시스템 역방향 링크의 다중경로 페이딩 채널에서 동기복조 방식의 다중 사용자 검출을 위한 반복 그룹단위 등지연 간섭제거 (IGEIC : iterative group-wise equal-delay interference cancellation) 알고리즘을 제안하고 성능을 해석하였다. IGEIC 알고리즘은 사용자를 그룹단위로 나누고, 그룹내에서 사용자 수만큼 반복해서 간섭을 제거한 다음, 다시 재확산시켜 다른 사용자 신호성분을 제거한다. IGEIC 알고리즘은 반복 그룹단위 등지연 직렬 간섭제거(IGESIC)와 반복 그룹단위 등지연 병렬 간섭제거(IGEPIC) 알고리즘으로 나누어 제안하였다. 확산부호의 완벽한 상관조건에서 그룹내 사용자 수만큼 간섭제거 후의 IGESIC와 IGEPIC 알고리즘 성능은 동일하며, 그룹내 사용자 수만큼의 간섭제거 직전의 성능은 IGEPIC 알고리즘이 IGESIC 알고리즘보다 우수하다. 또한 두 가지 제안 알고리즘 성능은 직렬 간섭제거 알고리즘 성능보다 3dB 이상 우수한 결과를 얻었다.

• Nuclear Engineering and Technology
• /
• 제55권12호
• /
• pp.4570-4575
• /
• 2023

Noise and Radio-frequency interference or RFI causes a significant restriction on the Free induction Decay or FID signal detection of the Nuclear Quadrupole Resonance procedure. Therefore, using this method in non-isolated environments such as industry and ports requires extraordinary measures. For this purpose, noise reduction algorithms and increasing signal-to-noise-and-interference ratio or SNIR have been used. In this research, sodium nitrite has been used as a sample and algorithms have been tested in a non-isolated environment. The resonant frequencies for the 150 g of test sample were measured at 303 K at about 1 MHz and 3.4 MHz. The main novelty in this study was, (1) using two types of antennas in the receiver to improve adaptive noise and interference cancellation, (2) using a separate helical antenna in the transmitter to eliminate the duplexer, (3) estimating the noise before sending the pulse to calculate the weighting factors and reduce the noise by adaptive noise cancellation, (3) reject the interference by blanking algorithm, (4) pulse integration in the frequency domain to increase the SNR, and (5) increasing the detection speed by new pulse integration technique. By interference rejection and noise cancellation, the SNIR is improved to 9.24 dB at 1 MHz and to 7.28 dB at 3.4 MHz, and by pulse integration 44.8 dB FID signal amplification is achieved, and the FID signals are detected at 1.057 MHz and 3.402 MHz at room temperature.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.291-294
• /
• 2000

Free-form surfaces arise in shipbuilding, automotive and aerospace industries. Specially compound free-form surfaces so do. Machining complicated products consist of compound surface, it is very important to avold and remove tool interferences. By the way, in compound surfaces the tool interference can occur not only in the tool path direction but also in the other direction. A new tool interference detection and correction using tool interference conditions is suggested to identify and correct the tool interference in compound surfaces.