• Korea-Australia Rheology Journal
• /
• 제18권1호
• /
• pp.1-8
• /
• 2006

Blend of bisphenol-A polycarbonate (PC) and (acrylonitrile-styrene-acrylic rubber) terpolymer (ASA) having excellent balance in the interfacial properties and mechanical strength was developed for the automobile applications. Since interfacial adhesion between PC and styrne-acrylonitrile copolymer (SAN) matrix of ASA is not strong enough, two different types of compatibilizers, i.e, diblock copolymer composed of tetramethyl polycarbonate (TMPC) and SAN (TMPC-b-SAN) and poly(methyl methacrylate) (PMMA) were examined to improve interfacial adhesion between PC and SAN. TMPC-b-SAN was more effective than PMMA in increasing interfacial adhesion between PC and SAN matrix of ASA (or weld-line strength of PC/ASA blend). When blend composition was fixed, PC/ASA blends exhibited similar mechanical properties except impact strength and weld-line strength. Impact strength of PCI ASA blend at low temperature was influenced by rubber particle size and its morphology. PC/ASA blends containing commercially available PMMA as compatibilizer also exhibited excellent balance in mechanical properties and interfacial adhesion.

• Korea-Australia Rheology Journal
• /
• 제13권2호
• /
• pp.83-87
• /
• 2001

The morphology and mechanical properties of the blends of a syndiotactic polystyrene (SPS) and poly-styrene-block-poly(ethylene-co-butylene)-block-polystyrene copolymers (SEBS) with various polystyrene block contents are studied. Mechanical properties, especially elongation at break and impact strength (IS), of the blend depend upon the morphology and interfacial adhesion, which in rum are affected by the viscosity ratio of constituent components and the styrene block content in SEBS. The IS of a blend was affected by the combined effect of rubber content and the interfacial adhesion. A maximum IS was found for a blend with the weight fraction of the PS block in an SEBS of 0.18. The IS of blends with smaller weight fractions of the PS block exhibited lower due to poor interfacial adhesion between SPS/SEBS in spite of a larger amount of rubber block. On the other hand, the IS of blends with larger weight fraction of the PS block becomes smaller due to lower amounts of rubber block in spite of better interfacial adhesion.

• Elastomers and Composites
• /
• 제34권1호
• /
• pp.31-44
• /
• 1999

4종류의 고무(NR, SBR, EPDM, BIMS)에 대해 완전가교 고무층과 부분가교 고무층간 계면 결합의 변화에 따른 계면 접착강도를 $30{\sim}120^{\circ}C$ 조건에서 조사하였고, 전자현미경을 이용하여 접착파단면을 조사하였다. 두 개의 완전가교 고무층간 계면에서는 물리적 결합이 계면 접착강도에 주도적인 역할을 하였고, 완전가교 고무층과 부분가교 고무층간 계면에는 물리적 결합과 화학적 결합이 공존하여 계면 접착강도에 영향을 미쳤다. 접착강도가 응집 인열강도와 유사한 수준으로 높을 때 NR은 "계면 노티인열" 형태를, EPDM은 "cross-hatched" 형태를 보였다.

• 폴리머
• /
• 제27권4호
• /
• pp.299-306
• /
• 2003

유리 섬유와 고분자로 구성된 복합재료에서는 이종재료 간의 계면 상호작용과 접착력이 재료의 성능과 기능에 큰 영향을 미친다. 따라서 표면처리에 의한 섬유개질 및 계면층 제어는 우수한 복합재료를 제조하는데 있어 매우 중요하다. 본 연구에서는 복합재료 계면에서의 물리화학적 현상을 개선하기 위해 실란커플링제를 이용한 유리 섬유의 형태구조 표면처리방법을 조사하였다. 또한 표면처리조건 (사이징 재료, 농도 등)에 따른 계면 특성과 이와 연관된 미세구조 분석을 통하여 유리 섬유/폴리프로필렌 복합재료의 계면설계기법을 제시하였다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 추계학술발표대회 논문집
• /
• pp.249-251
• /
• 2002

It is well known that the interaction and adhesion between the glass fiber(GF) and polymer matrix has a significant effect in determining the properties of fiber-reinforced materials. Therefore, it is one of most important to modify the surface of GF with an appropriate sizing. We investigated the treatment method of GF with coupling agent to improve the interaction of the interfacial regions, and then the correlation between interfacial property and interphase microstructure was examined in an attempt to realize a proper morphology around the GF surface.

• Korea-Australia Rheology Journal
• /
• 제13권3호
• /
• pp.125-130
• /
• 2001

Block copolymers of PC-b-PMMA (polycarbonate-b-polymethylmethacrylate) and PC -b-SAN (polycarbonate-b-(styrene-c-acrylonitrile)), were examined as compatibilizers for blonds of PC with SAN copolymer. The average diameter of the dispersed particles was measured with an image analyser, and the interfacial properties of the blonds were analysed with an imbedded fiber retraction (IFR) technique. The average diameter of dispersed particles and interfacial tension of the PC/SAN blends reached a minimum value when the SAN copolymer contained about 24 wt% AN. Interfacial tension and particle size were further reduced by adding compatibilizer to the PC/SAN blends. PC-b-PMMA was more effective than PC-b-SAN as a compatibilizer in reducing the average diameter of the dispersed particles and interfacial tension of PC/SAN blend. A direct proportionality between the particle diameter and interfacial tension was also observed. The interfacial properties of the PC/SAN blends were optimized by adding a block copolymer and using an SAN copolymer that had minimum interaction energy with PC.

• 항공우주시스템공학회지
• /
• 제13권2호
• /
• pp.34-42
• /
• 2019

열을 이용한 접합은 소재 간 열역학적 차이에 의한 열 변형 및 잔류응력 등 원하지 않은 결과를 야기한다. 폭발력 또는 전자기력을 이용한 고상 접합은 열이 사용되지 않아 열역학적 차이가 있는 소재접합에 이점이 있다. 이때, 해당 접합은 짧은 시간 내(${\mu}s$) 이루어지며, 접합면에서 고속 및 대 변형이 동반된다. 수치해석 모델은 고속 충돌 접합 메커니즘을 이해하는 데 중요한 역할을 수행한다. 하지만 고속 및 대 변형이 나타나는 해석에서 전통적인 라그랑지안 기법은 격자 얽힘이 발생해 결과의 신뢰성이 낮다. 본 연구는 무격자 수치해석 방식의 SPH(Smoothed Particle Hydrodynamics)를 이용하여 열역학적 차이가 있는 Cu와 CP-Ti의 고속 충돌 접합을 수행하였고 경계면 결합 형상이 발생함을 확인하였다. 해석의 결과로 경계면 결합 형상이 매개변수(충돌 속도, 충돌 각도)의 관계에 따라 형상의 정도(직선, 소용돌이), 주기, 길이 등이 다르게 나타나는 것을 확인 및 비교하였다.

• 유변학
• /
• 제10권4호
• /
• pp.247-255
• /
• 1998

이축 압출기에서 삼성분계 블렌드가 용융 혼련될 때 상구조의 형성과정에 대하여 연구하였다. 삼성분계 블렌드의 연속상은 polycarbonate(PC)로 고정하였고 나머지 분산상을 이루는 성분으로는 acrylonitrile-butadiene-styrene(ABS), methyl methacrylate-butadiene-ethyl acrylate(MBE), styrene-acrylonitrile(SAM) 공중합체, 그리고 poly(methyl methacrylate)(PMMA)를 사용하였다. 블렌드의 여러 가지 조성에 따라 최종 상구조는 현저한 차이를 보였고 특히 MBE와 PMMA의 경우는 각각 PC-SAN의 계면에 선택적으로 위치하였다. 삼성분계 고분자 블렌드의 상구조 형성과정은 성분간의 계면장력과 합체 현상의 상호 작용에 의하여 지배되었으며 합체의 정도는 계면에서의 점도에 의하여 민감하게 변화되었다.

• Tribology and Lubricants
• /
• 제21권6호
• /
• pp.302-305
• /
• 2005

Various carbon nanotubes (CNTs) are added into the epoxy matrix as reinforcements to investigate the effect on the wear behavior. Effects to the tribological properties of different loading concentrations and types of surface modification are investigated by using a linear reciprocal wear tester. As increasing the concentration of CNTs shows the reduction of the wear loss. Moreover, surface modified CNTs give better tribological property than as produced CNTs. It is due that the functional groups on the surface of CNTs increase the interfacial bonding between CNTs and epoxy matrix through chemical bonding. Changes in worn surface morphology are observed by optical microscope and SEM to investigate the wear behavior. CNTs in the epoxy matrix near the surface are exposed and it becomes the lubricating working film on the worn surface. It reduces the friction and results in the lower surface roughness morphology in the epoxy matrix as increasing the contents of the CNTs.

• Restorative Dentistry and Endodontics
• /
• 제20권1호
• /
• pp.183-192
• /
• 1995

The purpose of this study was to evaluate the effect of smear layer management on the interfacial morphology between dentin bonding system and dentin. Clearfil New Bond, Scotchbond Multipurpose, Prisma Universal Bond 3 and X-R Bond were used on the cervical dentinal surfaces of bovine incisor teeth. All of the dentin bonding systems were labeled with fluorescene in primer and rhodamine B in adhesive. Specimens of 2~3mm thichness were prepared by longitudinal and labiolingual sectioning. The interface between dentin bonding system and dentin was observed by flouresence imaging with a confocal laser scanning microscope. Following results were obtained. 1. In the specimen of Clearfil New Bond, dentinal tubules were widened by destruction of peritubular dentin in the course of treatment with phosphoric acid of high concentration. 2. Hybrid layer was observed in the specimen of Scotchbond Multipurpose and X-R Bond. 3. In the specimen of Prisma Universal Bond 3, the penetraton of adhesive was not observed clearly.