• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.292-297
• /
• 2000

In this research, the dynamic photoelastic experimental hybrid method for bimaterial is introduced. Dynamic biaxial loading device is developed, its strain rate is 31.637 s-1 and its maximum impact load is 20 ton. Manufactured methods for model of the dynamic photoelastic experiment for bimaterial are suggested. They are bonding method(bonding material: AW106, PC-1) and molding method. In the bonding method, residual stress is not occurred in the manufactured bimaterial. Crack is propagated along the interface or sometimes deviated from the interface. While in the molding method, residual stress is occurred in the manufactured bimaterial. Crack is always deviated from the interface and propagated in the epoxy region(softer materila). In order to propagate with constant velocity along the interface of bimaterial with arbitrary stiffer material, edge crack should be located along the interface of the acute angle side of the softer material in the bimaterial.

• 한국주조공학회지
• /
• 제13권1호
• /
• pp.42-49
• /
• 1993

Conventional manufacturing process for cast iron-babbitt metal composite is complicate and bimetallic bonding by centrifugal casting is also difficult because their melting point is largely different and nonmetallic inclusion exists on outer shell. This study is aiming to simplify multistage process by adding Cu-powder as insert metals during cast iron solidification. The variables on fabrication of composite pipe are mold rotating speed and inner surface temperature of outer metal. The optimum temperature range for fusion bonding between cast iron and Cu-layer was $1100^{\circ}C-1140^{\circ}C$ in case of mold rotating speed was 700rpm. When the inner surface of Cu-layer was at $900^{\circ}C$, the value of interfacial hardness between Cu-layer and babbitt metal were higher than Cu-matrix by forming diffusion layer, interfacial products between Cu-layer and babbitt metal are proved to be $Cu_6Sn_5({\eta})$by XRD.

• Structural Engineering and Mechanics
• /
• 제78권3호
• /
• pp.319-332
• /
• 2021

The wood-concrete composite is an interesting solution in the field of Civil Engineering to create high performance bending elements for bridges, as well as in the building construction for the design of wood concrete floor systems. The authors of this paper has been working for the past few years on the development of the bonding process as applied to wood-concrete composite structures. Contrary to conventional joining connectors, this assembling technique does ensure an almost perfect connection between wood and concrete. This paper presents a careful theoretical investigation into interfacial stresses at the level of the two interfaces in composite wooden beam- reinforced concrete slab strengthened by external bonding of prestressed composite plate under a uniformly distributed load. The model is based on equilibrium and deformations compatibility requirements in all parts of the strengthened composite beam, i.e., the wooden beam, RC slab, the CFRP plate and the adhesive layer. The theoretical predictions are compared with other existing solutions. This research is helpful for the understanding on mechanical behaviour of the interface and design of the CFRP- wooden-concrete hybrid structures.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 춘계학술발표대회 개요집
• /
• pp.9-16
• /
• 2002

• 마이크로전자및패키징학회지
• /
• 제19권2호
• /
• pp.35-39
• /
• 2012

플립칩 접합시 발생하는 계면반응 거동과 접합특성을 계면에 생성되는 금속간화합물의 관점에서 접근하였다. 이를 위하여 Al/Cu와 Al/Ni의 under bump metallization(UBM) 층과 Sn-Cu계 솔더(Sn-3Cu, Sn-0.7Cu)와의 반응에 의한 금속간화합물의 형성거동 및 계면접합성을 분석하였다. Al/Cu UBM 상에서 Sn-0.7Cu 솔더를 리플로우한 경우에는 솔더/UBM 계면에서 금속간화합물이 형성되지 않았으며, Sn-3Cu를 리플로우한 경우에는 계면에서 생성된 $Cu_6Sn_5$ 금속간화합물이 spalling 되어 접합면이 분리되었다. 반면에 Al/Ni UBM 상에서 Sn-Cu계 솔더를 리플로우한 경우에는 0.7 wt% 및 3 wt%의 Cu 함량에 관계없이 $(Cu,Ni)_6Sn_5$ 금속간화합물이 계면에 형성되어 있었으며, 계면접합이 안정적으로 유지되었다.

• 한국재료학회지
• /
• 제5권2호
• /
• pp.191-196
• /
• 1995

비정질 PEEK 필름의 self-bonding강도는 접합시의 공정변수(시간, 온도, 그리고 압력)와 밀접한 관계가 있다. 본 연구에서는 이러한 공정변수의 효과를 규명하기 위하여 각기 다른 접합조건하에서 개발된 시편들의 self-bonding강도를 single lap-shear test를 통하여 측정된 각각의 전단 응력(shear strength)으로 나타내었다. 개발된 self-bonding강도는 접합온도가 증가함에 따라 증가하였으며, 접합시간의 1/4승에 일차함수적으로 비례증가하였다. 접합공정 중의 압력의 효과는 단지 초기 접합단계인 wetting에 기여하였을 뿐 self-bonding강도 자체에는 거의 영향을 미치지 않는 것으로 사려되었다. 결론적으로 비정질 PEEK 필름의 self-bonding현상은 현장에서의 실제 접합공정에서 어떠한 접착재료의 사용없이도 모재와 같은 강도를 개발하는데 무한한 가능성이 있는 것으로 판단되었다.

• 한국주조공학회지
• /
• 제41권6호
• /
• pp.535-542
• /
• 2021

본 연구에서는 주철-알루미늄 이종재료의 계면결합강도를 향상시키기 위하여 탈흑연 열처리를 통해 주철 표면에서 일정 깊이까지의 흑연을 제거하였다. 열처리 시간이 증가함에 따라 흑연이 제거되는 깊이는 증가하였으며, 열처리 시간과 깊이 사이에 선형 관계가 나타났다. 일정 깊이의 흑연이 제거된 주철에 알루미늄을 다이캐스팅 공법으로 주조접합하여 주철에서 흑연이 제거된 공간을 알루미늄으로 채운 후, 계면 반응 및 알루미늄 침투 깊이를 조사하고 계면접합강도를 평가하였다. 다이캐스팅 공법을 통한 알루미늄은 탈흑연 열처리된 주철 표면에서 일정한 깊이까지 채워지는 것으로 확인되었으며, 주철-알루미늄 계면에 금속간화합물이 생성되지는 않은 것으로 확인되었다. 계면접합강도는 열처리 시간과는 큰 관계없이 90MPa 수준의 접합강도를 나타내었으며 이는 탈흑연 열처리를 하지 않은 소재의 접합강도 12MPa에 비해 매우 높은 강도이며, 주철의 탈흑연 영역에서 고압 다이캐스팅 공정에 의해 침투된 알루미늄 용탕이 응고되면서 언더컷 구조의 기계적 결합에 의한 것으로 생각된다.

• 소성∙가공
• /
• 제6권2호
• /
• pp.136-144
• /
• 1997

(Ag-10%Ni)/Cu clad metals for electric contact switch were fabricated by cold-roll bonding process. 2 or 3 passes of cold-rolling was carried out for each process to investigate the effect of the rolling passes on the bonding property. The effect of the annealing temperature of copper before the cold-roll bonding on the bond strength was also studied. The specimen bonded with copper annealed below 30$0^{\circ}C$ before roll bonding showed good bond strength. This is because high stored energy in copper promoted the short range diffusion and the grain refinement of copper by the static recrystallization increased the degree of the interfacial coherency. The maximum peel strength of clad metals bonded with Cu annealed below 30$0^{\circ}C$ was 120N.

• Elastomers and Composites
• /
• 제52권4호
• /
• pp.257-265
• /
• 2017

In this work, CR (Chloroprene Rubber) was emulsified by phase-inversion emulsification with nonionic surfactants (NP-1025, LE-1017, and OP-1019) and an anionic surfactant (SDBS; sodium dodecylbenzenesulfonate), and its stabilization was investigated through a study of its adsorption characteristics, zeta potential, and flow behavior. As the amount of the mixed surfactant increased, the droplet size decreased, resulting in the increase of viscosity. In particular, a CR emulsion with a lower absorbance in the UV spectrum exhibited the highest zeta potential. The results of this experiment showed that the CR emulsion prepared using (LE-1017) and SDBS was the most stable. In this study, calcium hydroxide and aluminum hydroxide were added to enhance the mechanical properties of the CR emulsion, and the relationship between tensile strength, tear strength and surface free energy were investigated. The tensile and tear strengths of the CR emulsion incresed as the amount of calcium hydroxide and aluminum hydroxide increased. The highest tensile and tear strengths and surface free energy were observed for additions of 1.0% calcium hydroxide and 0.80% aluminum hydroxide, respectively. It was concluded that the interfacial bonding strength was improved by the even dispersion of calcium hydroxide and aluminum hydroxide in the CR emulsion.

• Steel and Composite Structures
• /
• 제11권6호
• /
• pp.435-454
• /
• 2011

Bonding composite materials to structural members for strengthening purpose has received a considerable attention in recent years. The major problem when using bonded FRP or steel plates to strengthen existing structures is the high interfacial stresses that may be built up near the plate ends which lead to premature failure of the structure. As a result, many researchers have developed several analytical methods to predict the interface performance of bonded repairs. In this paper, a numerical solution using finite - difference method is used to calculate the interfacial stress distribution in beams strengthened with FRP plate having a tapered ends with different thinning profiles. These latter, can significantly reduce the stress concentration. In the present theoretical analysis, the adherend shear deformations are taken into account by assuming a parabolic shear stress through the thickness of both beam and bonded plate. Numerical results from the present analysis are presented to demonstrate the advantages of use the tapers in design of strengthened beams.