• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1994년도 추계학술대회 논문집
• /
• pp.59-64
• /
• 1994

The Si-SiO$_2$interface trpas of the degraded short-channel SONOSFET memory devices were investigated using the charge pumping techniques. The degradation of devices with write/erase cycle appeared as the increase of the Si-SiO$_2$interface trap density. In order to determine the capture cross-section of the interface trap. I$\_$CP/-V$\_$GL/ characteristic curves were measured at different temperatures. Also, the spatial distributions of Si-SiO$_2$interface trap were examined by the variable-reverse bias boltage method.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.81-82
• /
• 2006

SOI(Silicon-On-Insulator) MOSFET의 전기적 특성에 미치는 게이트 산화막과 계면준위 밀도의 관계를 조사하였다. 결함이 발생하지 않는 얕은 소스/드레인 접합을 형성하기 위하여 급속열처리를 이용한 고상확산방법으로 제작한 SOI MOSFET 소자는 급속열처리 과정에서 계면준위가 증가하여 소자의 특성이 열화된다. 이를 개선하기 위하여 $H_2/N_2$ 분위기에서 후속 열처리 공정을 함으로써 소자의 특성이 향상됨을 볼 수 있었다. 이와같이 급속열처리 공정과 $H_2/H_2$ 분위기에서의 후속 열처리 공정이 소자 특성에 미치는 영향을 분석하기 위하여 소자 시뮬레이션을 이용하여 게이트 산화막과 채널 사이의 계면준위 밀도를 분석하였다. 그 결과, n-MOSFET의 경우에는 acceptor-type trap, p-MOSFET의 경우에는 donor-type trap density가 소자특성에 큰 영향을 미치는 것을 확인하였다.

• 한국전기전자재료학회논문지
• /
• 제24권11호
• /
• pp.900-904
• /
• 2011

In this paper, we investigated an anomalous hump phenomenon under the positive bias stress in p-type LTPS TFTs. The devices with inferior electrical performance also show larger hump phenomenon. which can be explained by the sub-channel induced from trapped electrons under thinner gate oxide region. We can confirm that the devices with larger hump have larger interface trap density ($D_{it}$) and grain boundary trap density ($N_{trap}$) extracted by low-high frequency capacitance method and Levinson-Proano method, respectively. From the C-V with I-V transfer characteristics, the trapped electrons causing hump seem to be generated particularly from the S/D and gate overlapped region. Based on these analysis, the major cause of an anomalous hump phenomenon under the positive bias stress in p-type poly-Si TFTs is explained by the GIDL occurring in the S/D and gate overlapped region and the traps existing in the channel edge region where the gate oxide becomes thinner, which can be inferred by the fact that the magnitude of the hump is dependent on the average trap densities.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제5권2호
• /
• pp.69-76
• /
• 2005

Interface-trap density, lifetime and Schottky barrier height of erbium-silicided Schottky diode are evaluated using equivalent circuit method. The extracted interface trap density, lifetime and Schottky barrier height for hole are determined as $1.5{\times}10^{13} traps/cm^2$, 3.75 ms and 0.76 eV, respectively. The interface traps are efficiently cured by $N_2$ annealing. Based on the diode characteristics, various sizes of erbium- silicided/platinum-silicided n/p-type Schottky barrier metal-oxide-semiconductor field effect transistors (SB-MOSFETs) are manufactured from 20 m to 35nm. The manufactured SB-MOSFETs show excellent drain induced barrier lowering (DIBL) characteristics due to the existence of Schottky barrier between source and channel. DIBL and subthreshold swing characteristics are compatible with the ultimate scaling limit of double gate MOSFETs which shows the possible application of SB-MOSFETs in nanoscale regime.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제14권1호
• /
• pp.34-39
• /
• 2014

This paper discusses the 3-level charge pumping (CP) method in planar-type Silicon-Oxide-High-k-Oxide-Silicon (SOHOS) and Silicon-Oxide-Nitride-Oxide-Silicon (SONOS) devices to find out the reason of the degradation of data retention properties. In the CP technique, pulses are applied to the gate of the MOSFET which alternately fill the traps with electrons and holes, thereby causing a recombination current Icp to flow in the substrate. The 3-level charge pumping method may be used to determine not only interface trap densities but also capture cross sections as a function of trap energy. By applying this method, SOHOS device found to have a higher interface trap density than SONOS device. Therefore, degradation of data retention characteristics is attributed to the many interface trap sites.

• 한국결정성장학회지
• /
• 제10권6호
• /
• pp.412-417
• /
• 2000

High electric field stressed trap distributions were investigated in the thin silicon oxide of polycrystalline silicon gate metal oxide semiconductor capacitors. The transient currents associated with the off time of stressed voltage were used to measure the density and distribution of high voltage stress induced traps. The transient currents were due to the discharging of traps generated by high stress voltage in the silicon oxides. The trap distributions were relatively uniform near both cathode and anode interface in polycrystalline silicon gate metal oxide semiconductor devices. The stress generated trap distributions were relatively uniform the order of $10^{11}$~$10^{12}$ [states/eV/$\textrm{cm}^2$] after a stress. The trap densities at the oxide silicon interface after high stress voltages were in the $10^{10}$~$10^{13}$ [states/eV/$\textrm{cm}^2$]. It was appeared that the transient current that flowed when the stress voltages were applied to the oxide was caused by carriers tunneling through the silicon oxide by the high voltage stress generated traps.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제15권5호
• /
• pp.497-503
• /
• 2015

It is essential to acquire an accurate and simple technique for extracting the interface trap density ($D_{it}$) in order to characterize the normally-off gate-recessed AlGaN/GaN hetero field-effect transistors (HFETs) because they can undergo interface trap generation induced by the etch damage in each interfacial layer provoking the degradation of device performance as well as serious instability. Here, the frequency-dependent capacitance-voltage (C-V) method (FDCM) is proposed as a simple and fast technique for extracting $D_{it}$ and demonstrated in normally-off gate-recessed AlGaN/GaN HFETs. The FDCM is found to be not only simpler than the conductance method along with the same precision, but also much useful for a simple C-V model for AlGaN/GaN HFETs because it identifies frequency-independent and bias-dependent capacitance components.

• 전자공학회논문지
• /
• 제52권8호
• /
• pp.59-63
• /
• 2015

본 연구에서는 MONOS 플래시 메모리의 blocking oxide/trapping nitride, trapping nitride/tunneling oxide 계면 트랩을 구하기 위해 C-V 방법을 도입하였고, stoichiometric 조건을 만족하는 nitride와 silicon rich nitride를 trapping layer로 갖는 MONOS capacitor를 제작하여 각각의 interface trap 특성을 비교분석하였다. 보고에 따르면 silicon rich nitride는 stoichiometric nitride에 비해 다수의 shallow trap이 존재한다고 보고되고 있는데, 본 연구를 통해 이의 정량화가 가능함을 보였다.

• 한국결정성장학회지
• /
• 제12권6호
• /
• pp.304-310
• /
• 2002

실리콘 기판 위의 초기 산화막을 NO 열처리 및 재산화 공정방법으로 성장한 재산화된 질화산화막을 게이트 유전막으로 사용한 새로운 전하트랠형 기억소자로의 응용가능성과 계면트랩특성을 조사하였다. 0.35$\mu$m CMOS 공정기술을 사용하여 게이트 유전막은 초기산화막을 $800^{\circ}C$에서 습식 산화하였다 전하트랩영역인 질화막 층을 형성하기 위해 $800^{\circ}C$에서 30분간 NO 열처리를 한 후 터널 산화막을 만들기 위해 $850^{\circ}C$에서 습식 산화방법으로 재산화하였다. 프로그램은 11 V, 500$\mu$s으로 소거는 -l3 V, 1 ms의 조건에서 프로그래밍이 가능하였으며, 최대 기억창은 2.28 V이었다. 또한 11 V, 1 ms와 -l3 V, 1 ms로 프로그램과 소거시 각각 20년 이상과 28시간의 기억유지특성을 보였으며 $3 \times 10^3$회 정도의 전기적 내구성을 나타내었다. 단일접합 전하펌핑 방법으로 소자의 계면트랩 밀도와 기억트랩 밀도의 공간적 분포를 구하였다. 초기상태에서 채널 중심 부근의 계면트랩 및 기억트랩 밀도는 각각 $4.5 \times 10^{10}/{cm}^2$ 와 $3.7\times 10^{1R}/{cm}^3$ 이었다. $1 \times 10^3$프로그램/소거 반복 후, 계면트랩은 $2.3\times 10^{12}/{cm}^2$으로 증가하였으며, 기억트랩에 기억된 전하량은 감소하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.94-95
• /
• 2007

In this paper, the dependence of electrical characteristics of Silicon-$Al_2O_3$-Nitride-Oxide-Silicon (SANOS) memory cell transistors and program speed, reliability of memory device on interface trap between Si substrate and tunneling oxide was investigated. The devices were fabricated by the identical processing in a single lot except the deposition method of the charge trapping layer, nitride. In the case of P/E speed, it was shown that P/E speed is slower in the SONOS cell transistors with larger interface trap density by charge blocking effect, which is confirmed by simulation results. However, the data retention characteristics show much less dependence on interface trap. Therefore, to improve SANOS memory characteristic, it is very important to optimize the interface trap and charge trapping layer.