• Journal of the Korean Society of Propulsion Engineers
• /
• v.17 no.1
• /
• pp.70-79
• /
• 2013

In this work, a steady-state performance modeling and off-design performance analysis of the 2-spool separate-flow turbofan engine named (BR715-56) which is a power plant for the narrow body commercial aircraft is carried out for engine performance behaviors investigation and condition monitoring using a commercial code MATLAB/SIMULINK. Firstly, the engine component maps of fan, high pressure compressor, high pressure turbine and low pressure turbine are generated from similar component maps using the scaling method, and then the off-design performance simulation model is constructed by the mass flow matching and the work matching between components. The model is developed using SIMULINK, which has advantages of easy steady-stare and dynamic modelling and user friendly interface function. It is found that the off-design performance analysis results using the proposed model are well agreed with the performance analysis results by GASTURB at various operating conditions.

• Structural Monitoring and Maintenance
• /
• v.4 no.1
• /
• pp.17-31
• /
• 2017

Since extensometers are used to determine the absolute deformation of foundation and abutments and all results are obtained in reference to the base rod, the accuracy of these results has been constantly a subject of debate. In this regard, locating and installing extensometers outside the range of effect zone is also another challenge. The main purpose of this paper is to investigate and modify extensometers results based on the mentioned issues. For this aim, the concrete RCC Zhaveh dam in Iran was selected as the case study. To study the results of extensometers installed in this dam, first, the 3DEC_DP 5.00 software was applied for numerical modeling. Parameters such as discontinuities, dead load and piezometric pressure in the interface of concrete and rock were considered. Next, using the results obtained from 6 extensometers in foundation and abutments and 4 clinometers in dam body, the numerical model was calibrated through back analysis method. The results indicate that the base rod is moved and is not recommended being used as the base point. In other words, because installation of base anchor outside the range of effect zone is not possible due to the operational and economic considerations, the obtained results are not accurate enough. The results indicate a considerable 2-3 mm displacement of the base rod (location of the base anchor) in reference to the real zero point location, which must be added to the base rod results.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.3
• /
• pp.1-6
• /
• 2014

Companies almost don't use an integrated control system using expensive network system in multimedia like TV and DID, despite IP-Broadcasting and communication equipment have expanded rapidly. The proposed integrated TCU(terminal control unit) is a control device that supports TV power On/Off check and remote control, power control reservation function, TV channel change, a variety of interface supports of input/output AC power & Lan port, RS-232C and IR using existing IP network after there is installed the Wake-on -Lan in the set-top box. The TCU can control and monitor 24 hours unlike existing low-cost control system RF method. In existing control equipment markets without expandability and low price, the TCU development including 24 hours monitoring and automatic control functions is expected to secure a wide range of companies.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.7
• /
• pp.57-64
• /
• 2011

To adjust the difference of bandwidth between host interface and NAND flash memory, DRAM is adopted as the buffer management in SSD (Solid-state Disk). In this paper, we propose cost-effective techniques to enhance SSD performance instead of using expensive high bandwidth DRAM. The SSD data can be classified into three groups such as user data, meta data for handling user data, and FEC(Forward Error Correction) parity/ CRC(Cyclic Redundancy Check) for error control. In order to improve the performance by considering the features of each data, we devise a flexible burst control method through monitoring system and a page based FEC parity/CRC application. Experimental results show that proposed methods enhance the SSD performance up to 25.9% with a negligible 0.07% increase in chip size.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.41 no.2
• /
• pp.9-16
• /
• 2004

As the industry is developed, uses of various electric motor are increasing from general home to various fields of industry, and the kind becomes various daily. For these reasons, it is required to study the remote control and a package management about change of a speed drive system the supervision of administration appliance by real time, and the collection and process data together using internet prevailed on industry whole. Also, we can expect big effect in time and space, side of cost-cutting by control directly and manage appliance through internet. This paper deals with the development of a Web-Based remote control system for permanent magnet synchronous motor drives. The client/server system using TCP/IP protocols and DSP controller for remote control through internet and the Web interface that users can confirm data and state of PMSM is developed. This system is available for driving, braking, variable speed control and monitoring for PMSM in real time through administration program of Web-Based.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.8
• /
• pp.1831-1838
• /
• 2015

In this paper, a method of implementing a communication network in ship, which exploits a powerline-based legacy-line communication system (LLC), is presented. We develop an inductive coupling unit and a multi-interface device to connect a data communication terminal to the powerline. As a result of operation tests for the ship under working, the implemented LLC shows a transmission rate of at least 25.8 Mbps in the distance of 200 m away with 100% success rate. Thus, the system can be a useful alternative to implement a communication network in ship without additional channels. Being easy to be implemented and supporting various interfaces for data communication, the presented system will be very effective when a real-time monitoring system is launched in future digital ship.

• Journal of IKEEE
• /
• v.24 no.3
• /
• pp.777-782
• /
• 2020

In this paper, we propose CNN-based HMI system using Doppler radar and voice sensor, and present hardware design and implementation results. To overcome the limitation of single sensor monitoring, the proposed HMI system combines data from two sensors to improve performance. The proposed system exhibits improved performance by 3.5% and 12% compared to a single radar and voice sensor-based classifier in noisy environment. In addition, hardware to accelerate the complex computational unit of CNN is implemented and verified on the FPGA test system. As a result of performance evaluation, the proposed HMI acceleration platform can be processed with 95% reduction in computation time compared to a single software-based design.

• The Journal of the Korea Contents Association
• /
• v.15 no.12
• /
• pp.8-17
• /
• 2015

This paper presents a sound into color signal conversion using a colored-hearing synesthesia. The aim of the present paper is to implement a real-time conversion system which focuses on both hearing and sight which account for a great part of bodily senses. The proposed method of the real-time conversion of color into sound, in this paper, was simple and intuitive where scale, octave and velocity were extracted from MIDI input signals, which were converted into hue, intensity and saturation, respectively, as basic elements of HSI color model. In experiments, we implemented both the hardware system for delivering MIDI signals to PC and the VC++ based software system for monitoring both input and output signals, so we made certain that the conversion was correctly performed by the proposed method.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2002.02a
• /
• pp.285-291
• /
• 2002

The shearing process for the sheet metal is normally used in the precision elements such as a frame of TFT-LCD or lead frame of If chips. In these precision elements, the burr formation prevents the system assembly and needs the additional burr removing process. In this paper, we developed the small size NC punching system which has an aligning kinematics between the rectangular shaped punch and die. The punch is driven by an ai cylinder and the sheet metal is moving on the X-Y table system which is driven by two stewing motors. The microprocessor control the whole system and communicate with the monitoring PC by RS232C serial communication protocol. The graphic user interface program in PC monitors nil control the punching system. The cross shaped joint hinge supports the punching die and positioned by two differential screws, whose are installed in perpendicular directions. The aligning between the punch and die is performed using the sheets of half thickness(0.1mm Brass) of the real process for the frame of the TFT-LCD. Using half thickness Brass, the burr formation is magnified and we can decide the aligning direction more easily then using the real thickness(0.2mm) Aluminum. In this paper, the aligning results are measured manually using the SEM photographs and we hope to make the automated aligning procedures using some kinds of image processing techniques.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.2 s.46
• /
• pp.151-159
• /
• 2007

It is very important to collect all production-related status values during the manufacturing process of semiconductor. The analysis results of the collected data can be used for the operation rate, fault diagnosis, process control and removal of predicted obstacles of equipments, eventually contributing to the improvement of production efficiency. For this propose. many IC makers have adopted EES(Equipment Engineering System). As the use of web has become a daily lift activity lately, it has been suggested to expand the scope of monitoring equipments using HTTP or SOAP protocols. To fulfill the web-based EES, EDA(Equipment Data Aquisition) should be facilitated first by integrating and standardizing various forms of messages generated from many different semiconductor equipments. In this paper, a method for integration between different types of information is suggested based on the analysis of various protocols used for the communication between semiconductor equipments. In addition, a software architecture to support the method is desisted.