• 한국추진공학회지
• /
• 제14권4호
• /
• pp.46-58
• /
• 2010

최근 들어 새로운 차세대 우주발사체의 추진기관의 개발 방향에서 친환경성과 저비용성이 주요 관심사이며, 과산화수소와 액체메탄은 이러한 추진제로 대표적인 관심을 받고 있다. 과산화수소는 로켓 개발 초기에 널리 사용되었으나, 냉전시대에 성능을 최우선시함에 따라 사용이 현격히 감소해오다가 1990년대 이후 안정성의 향상과 더불어 다시 재조명 받기 시작하였다. 액체메탄은 실제 발사체의 추진기관으로 사용되지는 않았지만, 액화천연가스(LNG)로 사용할 수 있기 때문에 친환경/저비용 추진제로 지속적으로 관심을 받아왔으며 최근에는 달/화성 탐사와 관련하여 지속적인 연구가 수행되고 있다. 이러한 대표적인 친환경 추진제에 대한 활용 역사와 최근 연구 동향을 고찰하여, 향후 국내에서 소요될 각종 임무 조건을 만족하는 엔진의 연구 개발 방향 설정에 도움이 될 것으로 예상된다.

• 전자공학회논문지
• /
• 제53권8호
• /
• pp.129-135
• /
• 2016

본 연구는 알칼리 환원수기에 3가지 필터(활성카본, 중공사막, 카본블럭)를 이용해서 원수를 통과시켜 통수 양에 따른 산화환원전위(Oxidation Reduction Potential) ORP값이 안정화되는 것을 평가한 것이다. 알칼리 환원수기는 환원의 기능을 가지고 있는 물을 만드는 시스템으로 인체에 유익한 미네랄과 ORP값이 일반 물에 비해 매우 낮은 값을 가지고 있는 기능수이다. 필터를 통과한 물을 전기 분해하면 물속에 있는 음이온과 양이온은 격막을 통해서 -전극 쪽에는 칼슘($Ca^+$), 칼륨($K^+$), 마그네슘($Mg^+$), 나트륨($Na^+$)을 포함한 물로 인체에 유익한 미네랄이 포함된 알칼리 환원수를 얻고 +극에는 염소(Cl),인(P),유황(S)등 - 이온을 띄고 있는 유기물이 만들어 진다. 실험에서 알칼리 환원수(Alkaline Reduced Water)에서 전기분해의 전압의 크기를 조절하여 1단(pH8), 2단(pH8.5), 3단(pH9), 4단(pH9.5)으로 알칼리 환원수에 사용되고 -1단(pH6.0), -2단(pH5.0)의 산성산화수로 사용하고 있다. 이러한 시스템으로 3가지 필터에 통수하면서 ORP값이 어떻게 변화하고 어느 정도에서 안정화되는지를 평가하였고 대략 100L는 통수되어야 ORP값이 안정화하는 것을 측정하고 평가하였다.

• 생명과학회지
• /
• 제25권10호
• /
• pp.1124-1131
• /
• 2015

본 연구를 통해 보관 조건에 따른 사물탕 전탕액의 유효활성 물질 및 안정성과 관련된 특성들의 경시적 변화를 관찰하였다. 사물탕 전탕액의 보관온도(냉동 조건, 냉장 조건, 상온 암 조건, 상온 빛 조건, 고온 조건)를 달리하여, 각각을 0, 15, 30, 90, 180일간 보관하였다. 사물탕 전탕액의 경시적 변화로는 육안적 관찰, 산도, 흡광도, high performance liquid chromatography (HPLC) 분석, 생리활성(tyrosinase 저해 활성), 세균학적 검사 등을 관찰하였다. 그 결과, 사물탕 전탕액의 다양한 보관 기간과 온도에서, 육안적 검사, 산도, 흡광도, HPLC분석, 생리활성에서 경시적으로 큰 변화가 없었으며, 세균학적 검사를 통해서는 세균이 검출되지 않았다. 그러나 그 변화의 차이는 크지 않았지만, 사물탕 전탕액의 보관조건이 악화될수록, 보관기간이 증가할수록 미세한 변화가 관찰되었다. 따라서 6개월 이상 장기간 보관 할 경우, 사물탕 전탕액을 상온 암 조건, 상온 빛 조건, 고온 조건에서 보다 냉동 혹은 냉장 조건이나 가능하면 어두운 곳에서 보관하는 것이 유효성분 및 활성의 변화나 전탕액의 변질을 방지하기 위한 보관법으로 판단되었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.265.2-265.2
• /
• 2016

Oxide thin film transistors (TFTs) have attracted considerable interest for gate diver and pixel switching devices of the active matrix (AM) liquid crystal display (LCD) and organic light emitting diode (OLED) display because of their high field effect mobility, transparency in visible light region, and low temperature processing below $300^{\circ}C$. Recently, oxide TFTs with polycrystalline In-Ga-O(IGO) channel layer reported by Ebata. et. al. showed a amazing field effect mobility of $39.1cm^2/Vs$. The reason having high field effect mobility of IGO TFTs is because $In_2O_3$ has a bixbyite structure in which linear chains of edge sharing InO6 octahedral are isotropic. In this work, we investigated the characteristics and the effects of oxygen partial pressure significantly changed the IGO thin-films and IGO TFTs transfer characteristics. IGO thin-film were fabricated by rf-magnetron sputtering with different oxygen partial pressure ($O_2/(Ar+O_2)$, $Po_2$)ratios. IGO thin film Varies depending on the oxygen partial pressure of 0.1%, 1%, 3%, 5%, 10% have been some significant changes in the electrical characteristics. Also the IGO TFTs VTH value conspicuously shifted in the positive direction, from -8 to 11V as the $Po_2$ increased from 1% to 10%. At $Po_2$ was 5%, IGO TFTs showed a high drain current on/off ratio of ${\sim}10^8$, a field-effect mobility of $84cm^2/Vs$, a threshold voltage of 1.5V, and a subthreshold slpe(SS) of 0.2V/decade from log(IDS) vs VGS.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2007년도 추계 종합학술대회 논문집
• /
• pp.331-334
• /
• 2007

정보 갱신 주기가 빨라짐에 따라, 정보검색시스템에 트랜잭션 처리, 조인, 뷰, 트리거와 같은 데이터 관리 기능이 필요하다는 요구가 커지고 있다. 그러므로, DB-IR(데이타베이스 - 정보검색) 통합은 데이터 베이스 분야와 정보검색 분야 모두에 관심 대상이 되고 있다. DB-IR 통합 시스템은 기존의 DBMS 혹은 IRS(정보검색시스템)과는 다른 역할을 가지고 있기 때문에, 새로운 구조의 디자인이 필요하다. 본 논문에서는 효율적이고 안정적인 DB-IR 통합 시스템을 위한 서버 구조에 대해서 논의한다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 춘계학술발표대회
• /
• pp.1.1-1.1
• /
• 2011

Printed electronics based on the direct writing of solution processable functional materials have been of paramount interest and importance. In this talk, the synthesis of printable inorganic functional materials (conductors and semiconductors) for thin-film transistors (TFTs) and photovoltaic devices, device fabrication based on a printing technique, and specific characteristics of devices are presented. For printable conductor materials, Ag ink is designed to achieve the long-term dispersion stability and good adhesion property on a glass substrate, and Cu ink is sophisticatedly formulated to endow the oxidation stability in air and even aqueous solvent system. The both inks were successfully printed onto either polymer or glass substrate, exhibiting the superior conductivity comparable to that of bulk one. In addition, the organic thin-film transistor based on the printed metal source/drain electrode exhibits the electrical performance comparable to that of a transistor based on a vacuum deposited Au electrode. For printable amorphous oxide semiconductors (AOSs), I introduce the noble ways to resolve the critical problems, a high processing temperature above $400^{\circ}C$ and low mobility of AOSs annealed at a low temperature below $400^{\circ}C$. The dependency of TFT performances on the chemical structure of AOSs is compared and contrasted to clarify which factor should be considered to realize the low temperature annealed, high performance AOSs. For photovoltaic application, CI(G)S nanoparticle ink for solution processable high performance solar cells is presented. By overcoming the critical drawbacks of conventional solution processed CI(G)S absorber layers, the device quality dense CI(G)S layer is obtained, affording 7.3% efficiency CI(G)S photovoltaic device.

• 한국정보시스템학회지:정보시스템연구
• /
• 제27권2호
• /
• pp.95-114
• /
• 2018

Purpose The recent concern over environmental problems such as greenhouse gas emission and fine dust contributes increasing interest in renewable energies. However the intrinsic characteristics of renewable energies, intermittent and stochastic generation, might cause serious problems to the stability and controllability of power grid. Therefore countermeasures such as virtual power plant (VPP) must be prepared in advance of the spread of uncontrollable distributed renewable energy resources to be one of major energy sources. Design/methodology/approach This study deals with the design concept of the VPP platform. we proposed as a technology solution for achieving the stability of power grid by guaranteeing a single power profile combining multiple distributed power sources with ICT. The core characteristics of VPP should be able to participate in the grid operation by responding to operation instructions from the system operator, KPX, as well as the wholesale electricity market. Findings Therefore this study includes energy storage device(ESS) as a controllable component as well as renewable energy resources such as photovoltaic and wind power generation. Based on this configuration, we discussed core element technologies of VPP and protype design of VPP solution platform according to system requirements. In the proposed solution platform, UX design for the integrated control center and brokerage system were included as well as ancillary service function to respond to KPX's operation instruction with utilizing the capability of ESS. In addition, a simulator was suggested to verify the VPP operations.

• Clinics in Shoulder and Elbow
• /
• 제18권2호
• /
• pp.86-90
• /
• 2015

Background: Although there are several methods for evaluating bone quality, Hounsfield units (HU), a standardized computed tomography (CT) attenuation coefficient, provide a useful tool for estimating focal bone mineral density (BMD). The aim of this study is to investigate the HU for evaluating the degree of osteoporosis in greater tuberosity with regard to anchor positioning. Methods: Forty patients diagnosed as normal on shoulder CT were included and categorized according to age and gender. Axially sectioned CT images were processed to 3-dimensional models containing information about bone quality using Mimics (14.11 platform v14.1.1.1 Materialise). Three-dimensional anchors were simulated and positioned according to 6 regions of interest (ROI) in the greater tuberosity classified using Tingart's system. Mean HU of intra-anchor volumes in the 6 regions was measured. Results: A significant decrease in HU was observed with increasing age (p=0.0001) and menopause (p<0.001). A significant difference in HU was found between male and female groups with males showing the higher values (p=0.0001). HU of proximal areas of ROI was higher than those of distal areas (p<0.005). However, although mean HU of distal posterior ROI showed the lowest values, no statistically significant difference was found between anterior, middle, and posterior regions (p=0.087). Conclusions: Mean HU of ROIs provides a tool for preoperative assessment of focal BMD, which is a factor of suture anchor stability and can be used to aid decision-making regarding secure anchor positioning for rotator cuff repair. Our data support that the most secure point is the proximal regions of ROI.

• 대한토목학회논문집
• /
• 제40권2호
• /
• pp.217-223
• /
• 2020

연약지반에서의 공사들이 증가되면서 안전사고에 대한 관심도가 많아지고 보강공사에 따른 장비진입의 안정성을 확보하고자 많은 연구들이 진행되고 있다. Yamanouchi와 Meyerhof 수식과 같이 기존 문헌에서 제안하고 있는 이론적인 방정식들은 허용지지력을 계산하여 단순한 연약 지반 안정성을 평가하고 있으므로, 추가적인 수치해석 검증을 통해 연약지반 위의 접지압에 대한 응력증가분과 변형에 관한 이론방정식 검증이 필요하다. 본 연구에서는 유한요소해석 프로그램을 이용하여 토목섬유의 봉합인장강도의 증가에 따른 연약지반의 변형을 비교하였고, 접지압의 하중 크기에 따라 지중내 응력증가분의 상승을 현장에서 적용한 사례를 토대로 비교하였고, 이 적용사례를 토대로 접지압의 하중 변화에 따른 지중내 응력증가특성을 규명하였다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2018년도 춘계학술대회 논문집
• /
• pp.129-129
• /
• 2018

Hard coating application is effective way of cutting tool for hard-to-machine materials such as Inconel, Ti and composite materials focused on high-tech industries which are widely employed in aerospace, automobile and the medical device industry also Information Technology. In cutting tool for hard-to-machine materials, high hardness is one of necessary condition along with high temperature stability and wear resistance. In recent years, high-entropy alloys (HEAs) which consist of five or more principal elements having an equi-atomic percentage were reported by Yeh. The main features of novel HEAs reveal thermodynamically stable, high strength, corrosion resistance and wear resistance by four characteristic features called high entropy, sluggish diffusion, several-lattice distortion and cocktail effect. It can be possible to significantly extend the field of application such as cutting tool for difficult-to-machine materials in extreme conditions. Base on this understanding, surface coatings using HEAs more recently have been developed with considerable interest due to their useful properties such as high hardness and phase transformation stability of high temperature. In present study, the nanocomposite coating layers with high hardness on WC substrate are investigated using high entropy alloy target made a powder metallurgy. Among the many surface coating methods, reactive magnetron sputtering is considered to be a proper process because of homogeneity of microstructure, improvement of productivity and simplicity of independent control for several critical deposition parameters. The N2 is applied to reactive gas to make nitride system with transition metals which is much harder than only alloy systems. The acceleration voltage from 100W to 300W is controlled by direct current power with various deposition times. The coating layers are systemically investigated by structural identification (XRD), evaluation of microstructure (FE-SEM, TEM) and mechanical properties (Nano-indenter).