• Journal of the Korean Institute of Landscape Architecture
• /
• v.45 no.6
• /
• pp.62-75
• /
• 2017

This study analyzes the multiple effects of the following three aspects of waterscape facilities within apartment complexes: planning/designing, maintenance/management, and use of the facilities and suggests primary documents that will be fundamental for the methods to accelerate the implementation of waterscape facilities. A survey and analysis was conducted among a few of the most representative private apartment complexes in Seoul in accordance with the management and operation of waterscape facilities. The analysis used frequency analysis, descriptive statistics, reliability test, t-test, and PLS regression analysis. The research findings are as follows: first, the degree of use of waterscape facilities was found to be low regardless of the levels of operation, but residents' preference for the facilities was shown to be high, thus indicating there are still high expectations on the part of residents. Second, regardless of whether the facilities are being operated efficiently, the two items of location and display method under the section of planning and designing and the two items of aptitude and convenience under the section of use were found to positively affect the operation and use of waterscape facilities. Particularly, the item of freshness, cleanliness was shown to be directly and indirectly correlated with obsolescence, administration costs, and noise, which negatively affect the operation. Third, it was found that the administration costs itself that had been shown as the most negative factor of operating landscaping facilities in previous research did not cause problems in the residential area where the facilities are not operated efficiently. The finding suggests that the administration costs do not matter but that in the case of experience- and entertainment-typed facilities that residents want, they are linked to problems that do not introduce the desired facilities. Fourth, it was found that various aspects of planning, designing, maintaining, and using facilities interconnect and affect one another in the process of operating and using waterscape facilities resulting in the need to have a comprehensive approach to these three factors of planning, design, maintenance, management, and utilization. This study proposes that the needs and values of residents should be reflected to activate the introduction of landscaping facilities in the apartment complexes.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.7
• /
• pp.109-117
• /
• 2010

Building a large-scale testbed for Future Internet is very important to evaluate a new protocol and new network architecture designed by clean-slate approach. In Korea, new Future Internet testbed project, called FIRST (Future Internet Research for Sustainable Testbed), has been started since Mar. 2009 to design and test new protocols. This project is working together with ETRI and 5 universities. The FIRST@PC is to implement a virtualized hardware-accelerated PC-node by extending the functions of NetFPGA card and build a Future Internet testbed on the KOREN and KREONET for evaluating newly designed protocols and interesting applications. In this paper, we first briefly introduce FIRST@PC project and explain a 'MAC in IP Capsulator' user-space program using raw-socket in Linux to interconnect OpenFlow enabled switch sites on the KOREN and KREONET. After that, we address test results for TCP throughput performance for varying packet size. The test results show that the software based capsulator can support a reasonable bandwidth performance for most of applications.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.7
• /
• pp.118-127
• /
• 2010

Current TCP/IP-based Internet architecture has been used for over 30 years, however it will confront with fundamental problems due to new protocol extension limitation since communication environments will change drastically and various user requirements will be emerging in near future. To solve these problems, major countries have started Future Internet researches based on clean slate approach and they will deploy large-scale testbed to experiment and verify new functions. OpenFlow switch technology has been proposed as a new experimental technology for independent protocol that can utilized the legacy network devices and does not interfere with the production Internet traffic. Korea also started Future Internet testbed project called FIRST and OpenFlow switch with NetFPGA card will be used to deploy this testbed. To interconnect distributed testbed using OpenFlow switches, logical tunnel should be established by encapsulating MAC frame inside a unicast IP packet between OpenFlow switches because OpenFlow switches are not directly connected. In this paper, we have implemented a NetFPGA-based that performs MAC in IP tunneling between various OpenFlow switch sites implemented in domestic research network KOREN. The performance evaluation shows that the NetFPGA-based capsulator reveals better performance than the software-based tunneling and it can be utilized as a testbed for experimentation of Future Internet technologies.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2010.05a
• /
• pp.47-47
• /
• 2010

Over the past 20 years, constant progress in noise and vibration (NVH) engineering has enabled to constantly advance quality and comfort of operation and use of really any products - from automobiles to aircraft, to all kinds of industrial vehicles and machines - to the extend that for many products, supreme NVH performance has becomes part of its brand image in the market. At the same time, the product innovation agenda in the automotive, aircraft and really many other industries, has been extended very much in recent years by meeting ever more strict environmental regulations. Like in the automotive industry, the drive towards meeting emission and CO2 targets leads to very much accelerated adoption of new powertrain concepts (downsizing of ICE, hybrid-electrical...), and to new vehicle architectures and the application of new materials to reduce weight, which bring new challenges for not only maintaining but further improving NVH performance. This drives for innovation in NVH engineering, so as to succeed in meeting a product brand performance for NVH, while as the same time satisfying eco-constraints. Product innovation has also become increasingly dependent on the adoption of electronics and software, which drives for new solutions for NVH engineering that can be applied for NVH performance optimization of mechatronic products. Finally, relentless pressure to shorten time to market while maintaining overall product quality and reliability, mandates that the practice and solutions for NVH engineering can be optimally applied in all phases of product development. The presentation will first review the afore trends for product and process innovation, and discuss the challenges they represent for NVH engineering. Next, the presentation discusses new solutions for NVH engineering of products, so as to meet target brand values, while at the same time meeting ever more strict eco constraints, and this within a context of increasing adoption of electronics and controls to drive product innovation. NVH being very much defined by system level performance, these solutions implement the approach of "Model Based System Engineering" to increase the impact of system level analysis for NVH in all phases of product development: - At the Concept Phase, to be able to do business case analysis of new product concepts; to arrive at an optimized and robust product architecture (e.g. to hybrid powertrain lay-out, to optimize fuel economy); to enable target cascading, to subsystem and component level. - In Development Phase, to increase realism and productivity of simulation, so as to frontload virtual validation of components and subsystems and to further reduce reliance on physical testing. - During the final System Testing Phase, to enable subsystem testing by a combination of physical testing and simulation: using simulation models to simulate the final integration context when testing a subsystem, enabling to frontload subsystem testing before final system integration is possible. - To interconnect Mechanical, Electronical and Controls engineering, in all phases of development, by supporting model driven controls engineering (MIL, SIL, HIL). Finally, the presentation reviews examples of how LMS is implementing such new applications for NVH engineering with lead customers in Europe, Asia and US, with demonstrated benefits both in terms of shortening development cycles, and/or enabling a simulation based approach to reduce reliance on physical testing.