• International Journal of Naval Architecture and Ocean Engineering
• /
• 제1권1호
• /
• pp.20-28
• /
• 2009

In thus paper we validate a numerical model for wave-structure interaction by comparing numerical results with laboratory data. The numerical model is based on the Navier-Stokes (N-S) equations for an incompressible fluid. The N-S equations are solved by a two-step projection finite volume scheme and the free surface displacements are tracked by the volume of fluid (VOF) method The numerical model is used to simulate solitary waves and their interaction with a group of slender vertical piles. Numerical results are compared with the laboratory data and very good agreement is observed for the time history of free surface displacement, fluid particle velocity and wave force. The agreement for dynamic pressure on the cylinder is less satisfactory, which is primarily caused by instrument errors.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 춘계학술대회 논문집
• /
• pp.97-98
• /
• 2012

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 The Korea-Japan Joint Symposium
• /
• pp.35-36
• /
• 2003

The purpose of this work is to investigate the surface modification of LDPE film via corona discharge treatment and subsequent graft polymerization, and their effect on the resulting dyeability is studied in terms of the surface functional groups, surface energetics, and acid-base interaction between the modified LDPE and the dyes used.

• Nuclear Engineering and Technology
• /
• 제46권5호
• /
• pp.633-640
• /
• 2014

In this research, the surface roughness affecting the pressure drop in a pipe used as the steam generator of a PWR was studied. Based on the CFD (Computational Fluid Dynamics) technique using a commercial code named ANSYS-FLUENT, a straight pipe was modeled to obtain the Darcy frictional coefficient, changed with a range of various surface roughness ratios as well as Reynolds numbers. The result is validated by the comparison with a Moody chart to set the appropriate size of grids at the wall for the correct consideration of surface roughness. The pressure drop in a full-scale U-shaped pipe is measured with the same code, correlated with the surface roughness ratio. In the next stage, we studied a reduced scale model of a U-shaped heat pipe with experiment and analysis of the investigation into fluid-structure interaction (FSI). The material of the pipe was cut from the real heat pipe of a material named Inconel 690 alloy, now used in steam generators. The accelerations at the fixed stations on the outer surface of the pipe model are measured in the series of time history, and Fourier transformed to the frequency domain. The natural frequency of three leading modes were traced from the FFT data, and compared with the result of a numerical analysis for unsteady, incompressible flow. The corresponding mode shapes and maximum displacement are obtained numerically from the FSI simulation with the coupling of the commercial codes, ANSYS-FLUENT and TRANSIENT_STRUCTURAL. The primary frequencies for the model system consist of three parts: structural vibration, BPF(blade pass frequency) of pump, and fluid-structure interaction.

• 대한임상전기생리학회지
• /
• 제10권1호
• /
• pp.7-13
• /
• 2012

Purpose : This study was conducted to examine the effects of unstable surface training and galvanic vestibular stimulation on balance and proprioception. Methods : 4-week training was applied to 40 normal adults in their twenties (unstable surface training group 10, galvanic vestibular stimulation group 10, unstable surface training and galvanic vestibular stimulation group 10, control group 10). Balance and proprioception was measured before the experiment, after two weeks, and after four weeks. Repeated ANOVA was used for balance and proprioception analysis. Results : As a result of repeated ANOVA on balance changes in double support, a significant difference was found in open sight in interaction among groups and periods (p<0.05). As a result of repeated ANOVA on balance changes in double support, there was a significant difference in closed sight and interaction among groups and periods (p<0.05). As a result of repeated ANOVA on balance changes in proprioception, there was no statistically significant difference in interaction among groups and periods. Conclusion : In conclusion, both unstable surface training and galvanic vestibular stimulation had positive effect on balance control and proprioception improvement, and their excellence was not greatly different. Thus, it is possible to use unstable surface training and galvanic vestibular stimulation for physical therapy intervention to improve balance and proprioception. Since the results showed that simultaneous application of two methods had greater effects on difference compared with a single application, it is suggested to use this intervention in the clinical field.

• 한국지진공학회논문집
• /
• 제1권1호
• /
• pp.11-17
• /
• 1997

그 동안 구조물에 대한 지진해석이 기초와 지반의 특성을 무시하고 기초가 매우 단단한 것으로 가정하고 수행되었다. 최근 구조물-지반 상호작용에 관한 연구결과 구조물 지진거동이 기초와 지반의 특성에 따라 심하게 영향을 받을 수 있다는 것이 알려졌다. 전형적인 구조물-지반 상호작용 영향은 무한강성 무질량 기초의 운동학적 상호작용과 지반과 구조물 사이에서 발생하는 관성상호작용이다. 운동학적 상호작용은 묻힌 기초의 경우에는 중요하지만, 수직으로 전달되는 지진파를 받는 지표면상 기초의 경우에는 무시될 수 있다. 이 논문에서는 멕시코시티 4개 건물에 대해 관성상호작용만을 고려하고 1985년 멕시코시티 동서방향 지진기록을 사용하여 구조물의 지진거동을 조사하였다. 연구는 지표면상 기초나 말뚝기초를 가진 구조물에 대해 선형 및 비선형 지반조건을 고려하여 수행하였으며, 연구결과를 매우 견고한 기초를 갖는 구조물에 대한 것과 비교하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 춘계학술대회 논문집
• /
• pp.727-730
• /
• 2009

Highly active and stable nano-sized Ni catalysts supported on MgO-$Al_2O_3$ calcined from hydrotalcite-like materials have been successfully developed with a strong metal to support interaction (SMSI) to enhance the coke resistance in combined $H_2O$ and $CO_2$ reforming of $CH_4$ (CSCRM) for syngas ($H_2$/CO=2) production. The change of the surface area and NiO crystallite size with varying the pre-calcination temperature of support and Mgo content was investigated in relation to the coke resistance. As increasing the pre-calcination temperature, the surface area decreases and the metal to support interaction becomes weak. As a consequence, the coke deposition was more severe on catalysts pre-calcined at high temperature. It was concluded that highly dispersed Ni metal in the surface of Ni/MgO-$Al_2O_3$ catalyst (MgO=30 wt%) pre-calcined at $800^{\circ}C$ had a strong metal to support interaction (SMSI) resulting in an increase of coke resistance and high activity.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.781-784
• /
• 2002

Adhesion phenomenon is more significant for smaller objects, because adhesional force is proportional to size of the objects while gravitational force is proportional to the third power of it. For the purpose of microassembly, theoretical understanding is required for the Adhesion phenomenon. Authors have developed a force measurement system in an ultra-high vacuum chamber of Auger electron spectroscopy. The force between arbitrary combination of materials can be measured at a pressure less than 100 nPa after and before Ar ion sputtering and chemical analysis for several atomic layers of the surface. The results are successfully interpreted with a theory of contact mechanics. Since surface energy is quite important in the interpretation, electronic theory is used to evaluate the surface energy. In the manipulation of small objects, the adhesional force is always attractive. Repulsive force is essential for the manipulation. It can be generated by Coulomb interaction. The voltage required for detachment is theoretically analyzed and the effect of boundary conditions on the detachment is obtained. The possibility and limitations of micro-manipulation using both the adhesion phenomenon and Coulomb interaction are theoretically clarified. Its applicability to nano-technology is found to be expected.

• 한국철도학회논문집
• /
• 제9권5호
• /
• pp.561-568
• /
• 2006

Dynamic equations of motion for the interaction system of bridge and vehicle are derived to investigate the dynamic responses of bridge and vehicles induced by moving automated guide-way transit(AGT) vehicle and surface roughness of bridge. The vehicle model for ACT vehicle is idealized as 11 DOF including yawing, lateral translation and steering of wheels, and the bridges are modeled with finite element method. The AGT vehicle model was verified by experimental study. Parametric studies are carried out to investigate the effect of vehicle speed, surface roughness, stiffness and damping of the suspension system, AGT vehicles and dynamic wheel loads of the AGT vehicles. From the parametric study it can be seen that the dynamic incremental factor of the bridge and dynamic responses of vehicles have a tendency to increase with vehicle speeds, surface roughness and the stiffness of AGT vehicle suspension system. On the other hand those dynamic wheel loads have tendencies to decrease in according to increase of damping of the suspension system.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.120-125
• /
• 2004

Fatigue life of welded joints are governed by the propagation of multiple collinear surface cracks distributed randomly along weld bead. These cracks propagate in mutual interaction and coalescence of them. To estimate the fatigue life, the influences of above two mechanisms on the fatigue life should be taken into account. These two mechanisms appear through the stress intensity factors disturbed mutually. However, it is difficult to calculate the stress intensity factors of multiple surface cracks located in vicinity of weld toe. The stress intensity factors are calculated normally by using the Mk-factors, but such Mk-factors are very rare in literature. In this study, the Mk-factors were obtained from a parametric study on crack length and depth, in which a finite element method is used. A fatigue test for a cruciform welded joint was conducted. The fatigue life of the tested specimen was estimated through present method with the informations obtained from the test, e.g. the number, size and locations of the cracks. The estimated and measured fatigue life showed a good agreement.