• 대한교통학회지
• /
• 제24권7호
• /
• pp.139-148
• /
• 2006

도로교통혼잡비용에 대하여 단일시장모형, 내지는 승용차만이 존재하는 경우를 가정한 기존 모형과 이론이 갖는 한계점을 보완할 수 있는 대안으로서 대체적 관계인 승용차와 버스의 두개 교통수단이 존재하는 상호의존적 교통시장 하에서 최적 도로교통혼잡비용 산정에 대하여 연구하였다. 연구를 위하여 사회적 후생 극대화 문제의 이론적 배경인 소비자잉여 극대화문제 등 관련 교통경제학적 이론 및 문제점을 검토하고, 이 경우 목적함수인 사회적 후생함수가 교통수간의 대체효과를 감안하여 비분리 (non-separable)적이고 그 자코비안이 비대칭 (asymmetric)인 경우 적분경로의 문제등 제반 문제점 및 제약조건에 대한 이론적 검토가 수행되었다 이를 기초로 도로교통흔잡비용의 이론적 배경 및 수리 문제화에 대한 검토와 실현 가능한 상호의존적 교통시장 하에서 최적 도로교통혼잡비용을 산정하는 방법 및 그 의미에 대하여 검토 제시하였다.

• 한국해양공학회지
• /
• 제28권2호
• /
• pp.140-146
• /
• 2014

This study investigated the engineering characteristics of non-sintering binder-stabilized mixtures consisting of different ratios of a hardening agent(3%, 6%, 9%, 12%) for recycling industrial by-products through several series of laboratory tests. The hardening agents consisted of two kinds of non-sintering binders(NSB-1, NSB-2), which were developed by using inter-chemical reactions among blast furnace slag, phospho-gypsum, and an alkali activator. In addition, ordinary Portland cement(OPC) was used to compare the engineering characteristics of the stabilized mixture. An unconfined compressive test showed that the unconfined compressive strength increased with the curing time and mixing ratio. Experimental test results indicated that the 7-day strength of the NSB-1 mixture was similar to that of the OPC mixture. However, its 28-day strength was higher than that of the OPC mixture. The secant module of elasticity showed a range of $E_{50}=(42-109)q_u$ regardless of the agents. Based on the results of triaxial tests, the cohesion and friction angle increased with the mixing ratio.

• Journal of Mechanical Science and Technology
• /
• 제15권7호
• /
• pp.847-858
• /
• 2001

This paper considers the control model identification and H(sub)$\infty$ controller design for a tandem cold mill (TCM). In order to improve the performance of the existing automatic gauge control (AGC) system based on the Taylor linearized model of the TCM, a new mathematical model that can complement the Taylor linearized model is constructed by using the N4SID algorithm based on subspace method and the least squares algorithm based on ARX model. It is shown that the identified model had dynamic characteristics of the TCM than the existing Taylor linearized model. The H(sub)$\infty$ controller is designed to have robust stability to the system parameters variation, disturbance attenuation and robust tracking capability to the set-up value of strip thickness. The H(sub)$\infty$ servo problem is formulated and it is solved by using LMI (linear matrix inequality) techniques. Simulation results demonstrate the usefulness and applicability of the proposed H(sub)$\infty$ controller.

• 대한공간정보학회지
• /
• 제12권2호
• /
• pp.29-35
• /
• 2004

GPS 측량에서 GPS 상시관측소의 폭넓은 이용성과 높은 정확도로 인해 그 중요성이 점점 커지고 있다. 본 연구에서는 현재 RINEX FORMAT 형태로 인터넷에서 서비스 되고 있는 GPS 상시관측소의 자료를 이용하여 기존 삼각점과 GPS 상시관측소를 이용해 관측망(network)을 형성하여 임의 기준점의 성과를 도출하였으며, 이 기준점을 고정국으로 하여 RTK GPS 측위를 수행하였다. 그리고 향후, 이 방식을 이용하여 측량 작업시간과 경비를 획기적으로 줄일 수 있는 VRS-GPS측량에 대해 연구하고자 한다.

• 산업경영시스템학회지
• /
• 제30권2호
• /
• pp.29-36
• /
• 2007

This study was concerned about mobile web-service of a VMI in the SCM system. The VMI would be a main module part of the SCM and regarded as very important thing on supply chain. Therefore, it was essential to react in real time of materials production and situation of used auto-part in procurement company. We could find an affordable method to realize the VMI in a web service. The web service has made inter relevant enterprise easy to collaborate because of supporting most operating system and frame-work. Moreover, the use of a mobile tools was guaranteed a product recording and requirement of materials to real time in a rapid changing of production environments. The result of this research was very useful to apply the VMI system in medium and small sized auto parts company. This web service package has programmed the Visual Studio Dot Net 2003 and the MS SQL 2000 as database.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2018년도 추계학술발표대회
• /
• pp.637-640
• /
• 2018

The paper proposes a new deep network-based model that rates periorbital wrinkles in order to alleviate the shortcomings of the evaluation by human experts as well as to facilitate the automation. Periorbital wrinkles still need to be classified by human experts. Furthermore, the classification results from experts are different from each other in many cases due to the inter-interpreter variability and the absence of quantification criteria. Unlike existing classification methods which classify original images, the proposed model consists of a cascade of two deep networks: U-Net for the enhancement of wrinkles on an input image and VGG16 for final classification based on the wrinkle information. Experiments of the proposed model are made with a data set that consists of 433 images rated by experts, showing the promising performance.

• Nuclear Engineering and Technology
• /
• 제48권6호
• /
• pp.1338-1348
• /
• 2016

A novel fully passive small modular superheated water reactor (SWR) for underwater deployment is designed to produce 160 MWe with steam at $500^{\circ}C$ to increase the thermodynamic efficiency compared with standard light water reactors. The SWR design is based on a conceptual 400-MWe integral SWR using the internally and externally cooled annular fuel (IXAF). The coolant boils in the external channels throughout the core to approximately the same quality as a conventional boiling water reactor and then the steam, instead of exiting the reactor pressure vessel, turns around and flows downward in the central channel of some IXAF fuel rods within each assembly and then flows upward through the rest of the IXAF pins in the assembly and exits the reactor pressure vessel as superheated steam. In this study, new cladding material to withstand high temperature steam in addition to the fuel mechanical and safety behavior is investigated. The steam temperature was found to depend on the thermal and mechanical characteristics of the fuel. The SWR showed a very different transient behavior compared with a boiling water reactor. The inter-play between the inner and outer channels of the IXAF was mainly beneficial except in the case of sudden reactivity insertion transients where additional control consideration is required.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제7권6호
• /
• pp.939-950
• /
• 2015

Wave-induced Longshore Sediment Transport (LST) play an important role in the dynamics of the Dhanushkodi sandspit located southeast of Rameshwaram. The LST along the Dhanushkodi coast is studied based on data collected simultaneously in Gulf of Mannar (GoM) and Palk Bay (PB) using directional waverider buoys. The numerical model REF/DIF1 was used to calculate the nearshore waves and the LST rate was estimated using three different formulae. The model validation was done based on the measured nearshore waves using InterOcean S4DW. Numerical model LITPACK was also used for simulating non-cohesive sediment transport and the LITLINE module was used to study the shoreline evolution over 5 years. Low net annual LST along PB (${\sim}0.01{\times}10^6m^3$) compared to the GoM region ($0.3{\times}10^6m^3$) were due to the weak waves. Accretion in the region led to growth of the Dhanushkodi sandspit by 65 m during the period 2010-2015.

• Nuclear Engineering and Technology
• /
• 제52권5호
• /
• pp.1022-1028
• /
• 2020

One of the possible options for spent-fuel management in Korea is pyroprocessing, which is a process for electrochemical recycling of spent nuclear fuel. Nuclear material accountancy is considered to be a safeguards measure of fundamental importance, for the purposes of which, the amount of nuclear material in the input and output materials should be measured as accurately as possible by means of chemical analysis and/or non-destructive assay. In the present study, a neutron measurement system based on the fast-neutron energy multiplication (FNEM) and passive neutron albedo reactivity (PNAR) techniques was designed for nuclear material accountancy of a spent-fuel assembly (i.e., the input accountancy of a pyroprocessing facility). Various parameters including inter-detector distance, source-to-detector distance, neutron-reflector material, the structure of a cadmium sleeve around the close detectors, and an air cavity in the moderator were investigated by MCNP6 Monte Carlo simulations in order to maximize its performance. Then, the detector responses with the optimized geometry were estimated for the fresh-fuel assemblies with different ²³⁵U enrichments and a spent-fuel assembly. It was found that the measurement technique investigated here has the potential to measure changes in neutron multiplication and, in turn, amount of fissile material.

• Nuclear Engineering and Technology
• /
• 제50권8호
• /
• pp.1217-1233
• /
• 2018

Following a surge of interest in multi-unit risk in the last few years, many recent studies have suggested methods for multi-unit probabilistic safety assessment (MUPSA) and addressed several related aspects. Most of the existing studies though focused on two-unit nuclear power plant (NPP) sites or used rather simplified probabilistic safety assessment (PSA) models to demonstrate the proposed approaches. When considering an NPP site with three or more units, some approaches are inapplicable or yield very conservative results. Since the number of such sites is increasing, there is a strong need to develop and validate practical approaches to the related MUPSA. This article provides several detailed approaches that are applicable to multi-unit Level 1 PSA for sites with up to six or more reactor units. To validate the approaches, a multi-unit Level 1 PSA model is developed and the site core damage frequency is estimated for each of four representative multi-unit initiators, as well as for the case of a simultaneous occurrence of independent single-unit initiators in multiple units. For this purpose, an NPP site with six identical OPR-1000 units is considered, with full-scale Level 1 PSA models for a specific OPR-1000 plant used as the base single-unit models.