• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.685-688
• /
• 2002

In this paper, it is reported that the anode current changes at the constantly applied gate voltages and the current-voltage (I-V) characteristics of Si, Co silicide and Mo silicide field emitter arrays (FEAs) depending on vacuum level from a $10^{-9}$ torr to a $10^{-6}$ torr. The mechanism of the robustness of anode current degradation of Mo silicide FEAs under poor vacuum conditions can be explained by the model of tolerance for the oxygen adsorption and oxidation at the silicide surface. Also, we present the changes of emitting area and work function of the emitters according to vacuum level.

• Journal of the Optical Society of Korea
• /
• 제16권2호
• /
• pp.181-184
• /
• 2012

We report, for the first time, operation frequency dependence of current density-voltage ($J_{OLED}-V_{OLED}$) shift for multi-layer organic light-emitting diodes (OLEDs). When the OLEDs were electrically stressed for 21 hours with 50% duty voltage pulses at 60, 120, 240, and 360 Hz, the JOLED-VOLED shifts were suppressed by half for 360 Hz operation compared with 60 Hz operation, but with little change in emission efficiencies. This frequency dependent $J_{OLED}-V_{OLED}$ shift is believed to be commonly observed for typical multi-layer OLEDs and can be used to further improve lifetime of digitally-driven active-matrix OLED displays.

• 정보처리학회논문지D
• /
• 제11D권3호
• /
• pp.617-624
• /
• 2004

최근의 소프트웨어 개발 기술은 조립 가능한 컴포넌트를 모아 복잡한 소프트웨어 시스템을 만드는 것을 가능하게 하고 있다. 그러나 효율성, 신뢰성이 있는 동적 형상을 지원하는 컴포넌트 기반 시스템을 개발하기에는 어려움이 있다. 컴포넌트에 대한 명세화 되지 않은 의존과 행위가 실체의 원인이 되고 있다. 따라서 컴포넌트 기반 소프트웨어 시스템은 컴포넌트간의 의존성 및 컴포넌트 요구사항을 표현하는 명백한 유지가 있어야 한다. 본 논문은 컴포넌트 서비스에서 배치, 상태보고 및 제어를 위한 컴포넌트 서비스 레포지토리를 설계하고, 기존에 연구된 컴포넌트 의존성 알고리즘의 커스터마이징을 통하여 동적 의존성을 지원하는 재형상 인터페이스 알고리즘을 제안하여 응용 프로그램의 다른 문맥을 재사용 할 수 있도록 하였다.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2010년도 추계학술대회
• /
• pp.78-81
• /
• 2010

In this paper, we propose an efficient and effective selective protection scheme to SVC that exploit the propagation of protection effect by protecting significant frames that can give the maximum visual quality degradation. We model SVC dependency coding structure as a directed acyclic graph which is characterized with an estimated visual quality value as the attribute at each node. The estimated visual quality is calculated by using our model based on the proportions of intra- and inter-predicted MBs, amounts of residual, and estimated visual quality of reference frames. The proposed selective protection scheme traverses the graph to find optimal protection paths that can give maximum visual quality degradation. Experimental results show that the proposed selective protection scheme reduces the required number of frames to be protected by 46.02% compared to the whole protection scheme and 27.56% compared to the layered protection scheme.

• 한국경영과학회지
• /
• 제24권4호
• /
• pp.13-26
• /
• 1999

When we try to design a production planning system for a manufacturing company, it is a time consuming task to analyze various planning activities and identify inter-relationship among a lot of decisions made for the production planning. Most of the research efforts have been concentrated to well-organized independent decision-making problems that may usually be identified only after analyzing the characteristics of the decision-making process as a whole. In this paper, a methodology is suggested to characterize the whole process of the production planning for a manufacturing company and reduce the complexity of decision-making problems. The methodology is based on an experience of developing a production planning software for an automobile component manufacturer in korea. First, it is explained how to identify and represent the dependency among various decision-making variables. And a methodology is proposed to analyze the identified dependency among decision variables and identify decision-making process. Lastly, a practical example is provided to illustrate the analysis procedure in this paper.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.615-618
• /
• 2005

In this work, the effects of corner transistors in SOI MOSFETs were investigated. We fabricated SOI MOSFETs with various widths and a fixed length and characterized them. The SOI thickness was $4000{\AA}$ and the buried oxide(BOX) thickness was $4000{\AA}$. The isolation of active region was simply done by silicon etching and TEOS sidewall formation. Several undesirable characteristics have been reported for LOCOS isolation in fabrication on SOI wafers so far. Although we used an STI-like process instead of LOCOS, there were still a couple of abnormal phenomena such as kinks and double humps in drain current. Above all, we investigated the location of the parasitic transistors and found that they were at the corners of the SOI in width direction by high-resolution SEM inspection. It turned out that their characteristics are strongly dependent on the channel width. We made a contact pad through which we can control the body potential and figured out the dependency of operation on the body potential. The double humps became more prominent as the body bias went more negative until the full depletion of the channel where the threshold voltage shift did not occur any more. Through these works, we could get insights on the process that can reduce the effects of corner transistors in SOI MOSFETs, and several possible solutions are suggested at the end.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제16권1호
• /
• pp.112-117
• /
• 2016

This paper presents a half-rate current-integrating DFE receiver with sub-unit interval (sub-UI) inter-symbol interference (ISI) cancellation. By having a single additional DFE tap in each data path, the proposed DFE receiver can minimize BER degradation due to input pattern dependency and feedback tap latency problems in conventional current-integrating DFE receivers. The proposed DFE receiver was designed and fabricated in a 45 nm CMOS process, whose measurement results indicated that the BER bathtub width is increased from 0.235 UI to 0.315 UI (34% improvement) at $10^{-12}$ BER level.

• 한국재료학회지
• /
• 제2권1호
• /
• pp.76-82
• /
• 1992

$TEOS-O_3$ 산화막은 깔개층 물질에 따라 증착속도가 변하는 특성을 나타낸다. 본 논문에서는 $TEOS-O_3$ 산화막의 깔개층 물질 의존성 이외에도 배선 밀도, 배선 간격에 따라 증착속도가 달라지는 패턴 의존성에 대하여 조사하였다. 또한 $TEOS-O_3$ 산화막의 깔개층 물질 의존성 및 패턴 의존성을 줄이기 위해 다층 배선에서 1차 배선후에 깔개층, 즉 TEOS-base 프라즈마 산화막 및 $SiH_4-base$ 프라즈마 산화막을 증착했을 때 $TEOS-O_3$ 산화막의 증착 특성을 조사하였다. 그리고 그 깔개층 물질에 $N_2$ 프라즈마 처리를 했을 때 $TEOS-O_3$ 산화막의 증착 특성에 대해 조사하였다. 그 결과 $TEOS-O_3$ 산화막에서 기판 위에 배선 밀도와 배선 간격에 따른 의존성은 깔개층물질이 $SiH_4-base$ 일때보다 TEOS-base 프라즈마 산화막인 경우 $N_2$ 프라즈마 처리를 하면 깔개층 물질 표면이 O-Si-N화 되므로써 의존성이 사라지게 된다.

• Asia pacific journal of information systems
• /
• 제10권4호
• /
• pp.133-152
• /
• 2000

Successful Electronic Commerce(EC) requires not only a transformation of the supply chain but a redesign of organizational processes as well. Just as the organizations in a supply chain must cooperate with each other to achieve a collective goal, so too do the departments and groups that comprise an organization depend on each other to achieve the organization's goals. A lack of coordination at either of these levels can result in poor performance and high coordination costs. In addition, changes in inter-organizational dependencies can affect the dependencies within the affected organizations. The lack of coordination across two levels results in a transition gap in transforming the inter-organizational design to the intro-organizational design in EC deployments. The purpose of this research is to develop a modeling method for coordination, managing the linkage between inter- and intra-organizations in EC deployments. The method was applied to the EC development project of a cable TV home-shopping company. The coordination approach enabled us to manage dependencies among the coordination elements and identify the effect of a change on other elements, which became the basis for effective EC deployments. We will discuss the method and compare it with other dependency management methods.

• Journal of the Korean Physical Society
• /
• 제73권10호
• /
• pp.1589-1595
• /
• 2018

Similarity index measures the topological proximity of node pairs in a complex network. Numerous similarity indices have been defined and investigated, but the dependency of structure on the performance of similarity indices has not been sufficiently investigated. In this study, we investigated the relationship between the performance of similarity indices and structural properties of a network by employing a two-state random network. A node in a two-state network has binary types that are initially given, and a connection probability is determined from the state of the node pair. The performances of similarity indices are affected by the number of links and the ratio of intra-connections to inter-connections. Similarity indices have different characteristics depending on their type. Local indices perform well in small-size networks and do not depend on whether the structure is intra-dominant or inter-dominant. In contrast, global indices perform better in large-size networks, and some such indices do not perform well in an inter-dominant structure. We also found that link prediction performance and the performance of similarity are correlated in both model networks and empirical networks. This relationship implies that link prediction performance can be used as an approximation for the performance of the similarity index when information about node type is unavailable. This relationship may help to find the appropriate index for given networks.