• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.1A
• /
• pp.51-56
• /
• 2012

In order to reduce the complexity of HEVC, we propose a fast mode decision algorithm in depth videos. Since almost CU mode is decided as SKIP mode in depth-continuity regions, we design the algorithm using the property of depth videos. If cost of SKIP is smaller than the multiplication between the threshold for EarlySKIP and average cost of SKIP, EarlySKIP is performed. Otherwise, we calculate Inter $2N{\times}2N$. Then, if motion vector of Inter $2N{\times}2N$ is 0 and variance of CU is smaller than threshold for inter, we skip Inter $2N{\times}N$, Inter $N{\times}2N$. Experimental results show that our proposed algorithm reduces the encoding time from 39% to 82% with negligible PSNR loss and bitrate increase.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.1A
• /
• pp.34-43
• /
• 2007

In the IEEE 802.15.3 Medium Access Control (MAC) protocol, Simultaneously Operating Piconets (SOPs) are linked by the parent/child (P/C) or parent/neighbor (P/N) configuration, which work on a Time Division Multiple Access (TDMA) basis. This provides interference mitigation but the overall throughput is limited because the SOPs share the channel time exclusively. The protocol is not efficient for SOPs if we focus on the combination of interference mitigation and high throughput maintenance. In this paper Public Channel Time Allocation (Public CTA) is proposed, which is able to greatly reduce the inter-piconet interference (IPI) and achieve greater throughput without much loss of link success probability (LSP) in the SOPs. The simulation results based on the SOPs of Direct Sequence Ultra Wideband (DS-UWB) system demonstrate that the proposed scheme effectively supports the coexistence of SOPs, and it can not only significantly improve the overall throughput of SOPs but also maintain high LSP.

• Structural Engineering and Mechanics
• /
• v.30 no.6
• /
• pp.713-732
• /
• 2008

Serviceability and durability of the concrete members can be seriously affected by the corrosion of steel rebar. Carbonation front and or chloride ingress can destroy the passive film on rebar and may set the corrosion (oxidation process). Depending on the level of oxidation (expansive corrosion products/rust) damage to the cover concrete takes place in the form of expansion, cracking and spalling or delamination. This makes the concrete unable to develop forces through bond and also become unprotected against further degradation from corrosion; and thus marks the end of service life for corrosion-affected structures. This paper presents an analytical model that predicts the weight loss of steel rebar and the corresponding time from onset of corrosion for the known corrosion rate and thus can be used for the determination of time to cover cracking in corrosion affected RC member. This model uses fully the thick-walled cylinder approach. The gradual crack propagation in radial directions (from inside) is considered when the circumferential tensile stresses at the inner surface of intact concrete have reached the tensile strength of concrete. The analysis is done separately with and without considering the stiffness of reinforcing steel and rust combine along with the assumption of zero residual strength of cracked concrete. The model accounts for the time required for corrosion products to fill a porous zone before they start inducing expansive pressure on the concrete surrounding the steel rebar. The capability of the model to produce the experimental trends is demonstrated by comparing the model's predictions with the results of experimental data published in the literature. The effect of considering the corroded reinforcing steel bar stiffness is demonstrated. A sensitivity analysis has also been carried out to show the influence of the various parameters. It has been found that material properties and their inter-relations significantly influence weight loss of rebar. Time to cover cracking from onset of corrosion for the same weight loss is influenced by corrosion rate and state of oxidation of corrosion product formed. Time to cover cracking from onset of corrosion is useful in making certain decisions pertaining to inspection, repair, rehabilitation, replacement and demolition of RC member/structure in corrosive environment.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.4 no.1
• /
• pp.7-13
• /
• 2005

In this paper, we propose the time synchronization module on fiber optic repeater to use optic line delay for obtaining time synchronization between up-link and down-link, in the 2.3 GHz WiBro network using TDD/OFDM (Time Division Duplex/Orthogonal Frequency Division Multiplexing) Generally, when we use fiber optic repeater to remove the shade area, it occurs transmission delay which is caused by optic transmission between RAS (Radio Access Station) and fiber optic repeater and inner delay of fiber optic repeater. Because the WiBro system is adopting a TOO method and there exists the difference of switching time which is caused by these delay between up-link and down-link, it occurs ISI (Inter Symbol Interference), ICI (Inter Carrier Interference). These interference results in the reduction of the coverage. And the inconsistency between Up-Link and Down-Link switching time maybe gives rise to the interruption of communication. In order to prevent these cases, we propose synchronization module using analog optic line delay as the one of synchronizing up-link and down-link. And we propose the consideration factor for the designing time synchronization module and the feature of optic line of analog method. The measurement result of optic line time synchronization module of structure proposed is as follows, the delay error of $0.5{\mu}g$ and the insertion loss value below maximum 4.5dB in range of $0{\sim}40{\mu}s$. These results fully meet the specification of WiBro System.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.8
• /
• pp.34-42
• /
• 2009

Mobile communication traffic is changing from voice to data/internet, e.g. wireless internet access, SMS/MMS. more and more. Therefore many data services are coming out over 3G, Mobile WiMAX(WIBRO), LTE etc. Wireless internet market is growing and MIPv6 is more important and many protocols being studied and developed from MIPv6 to Fast MIPv6, Hierachical MIPv6, Proxy MIPv6, etc. The significant factor over MIPv6 is Hand-over latency and Packet-loss PMIPv6 is efficient for reducing mobility related messages and hand-over latency, but it considers single LMA domain. If mobile node is moving inter-LMAs, hand-over delay time affects the real-time communications. To overcome this hand-over delay, we propose present and new enhanced schemes and analize the performance and show the results.

• Journal of Broadcast Engineering
• /
• v.27 no.3
• /
• pp.361-368
• /
• 2022

Quaternary tree plus multi-type tree (QT+MTT) structure was adopted in the Versatile Video Coding (VVC) standard as a block partitioning tool. QT+MTT provides excellent coding gain; however, it has huge encoding complexity due to the flexibility of the binary tree (BT) and ternary tree (TT) splits. This paper proposes a fast inter coding unit (CU) partitioning algorithm for BT and TT split types based on prediction accuracy functions using the mean of the absolute error (MAE). The MAE-based decision model was established to achieve a consistent time-saving encoding with stable coding loss for a practical low complexity VVC encoder. Experimental results under random access test configuration showed that the proposed algorithm achieved the encoding time saving from 24.0% to 31.7% with increasing luminance Bjontegaard delta (BD) rate from 1.0% to 2.1%.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.10C
• /
• pp.950-958
• /
• 2007

This paper presents an efficient packet loss resilient scheme for real-time video transmission over the Internet. By analyzing the temporal and spatial dependencies in inter- and intra-frames, we assign forward error correction codes (FEC) across video packets for minimizing the effect of error concealment and error propagation from packet loss. To achieve optimal allocation of FEC codes, we formulate the effect of packet loss on video quality degradation as packet distortion model. Then we propose an unequal FEC assignment scheme with low complexity based on packet correction rate, which uses the packet distortion model and includes channel status information. Simulation results show that the proposed FEC assignment scheme gives substantial improvement for the received video quality in packet lossy networks. Furthermore the proposed scheme achieves relatively smaller degradation of video quality with higher packet loss rates.

• Journal of Korean Neurosurgical Society
• /
• v.55 no.3
• /
• pp.142-147
• /
• 2014

Objective : A thoracolumbar burst fracture is usually unstable and can cause neurological deficits and angular deformity. Patients with unstable thoracolumbar burst fracture usually need surgery for decompression of the spinal canal, correction of the angular deformity, and stabilization of the spinal column. We compared two struts, titanium mesh cages (TMCs) and expandable cages. Methods : 33 patients, who underwent anterior thoracolumbar reconstruction using either TMCs (n=16) or expandable cages (n=17) between June 2000 and September 2011 were included in this study. Clinical outcome was measured by visual analogue scale (VAS), American Spinal Injury Association (ASIA) scale and Low Back Outcome Score (LBOS) for functional neurological evaluation. The Cobb angle, body height of the fractured vertebra, the operation time and amount of intra-operative bleeding were measured in both groups. Results : In the expandable cage group, operation time and amount of intraoperative blood loss were lower than that in the TMC group. The mean VAS scores and LBOS in both groups were improved, but no significant difference. Cobb angle was corrected higher than that in expandable cage group from postoperative to the last follow-up. The change in Cobb angles between preoperative, postoperative, and the last follow-up did not show any significant difference. There was no difference in the subsidence of anterior body height between both groups. Conclusion : There was no significant difference in the change in Cobb angles with an inter-group comparison, the expandable cage group showed better results in loss of kyphosis correction, operation time, and amount of intraoperative blood loss.

• ETRI Journal
• /
• v.39 no.1
• /
• pp.41-50
• /
• 2017

In connection-oriented data transport services, data loss can occur when a service experiences a problem in its end-to-end path. To resolve the problem promptly, the data transport systems providing the service must quickly modify their internal configurations, which are distributed among different locations within each system. The configurations are modified through a series of problem (event) handling procedures, which are carried out by multiple control processors in the system. This paper proposes a provisioning-to-signaling method for inter-control-processor messaging to improve the time efficiency of event processing. This method simplifies the sharing of the runtime event, and minimizes the time variability caused by the amount of event data, which results in a decrease in the latency time and an increase in the time determinacy when processing global events. The proposed method was tested for an event that required 4,000 internal path changes, and was found to lessen the latency time of global event processing by about 50% compared with the time required for general methods to do the same; in addition, it reduced the impact of the event data on the event processing time to about 30%.

• IEIE Transactions on Smart Processing and Computing
• /
• v.2 no.6
• /
• pp.345-349
• /
• 2013

This paper proposes a simplified generalized residual prediction (GRP) that reduces the computational complexity of spatial scalability in scalable high efficiency video coding (SHVC). GRP is a coding tool to improve the inter prediction by adding a residual signal to the inter predictor. The residual signal was created by carrying out motion compensation (MC) of both the enhancement layer (EL) and up-sampled reference layer (RL) with the motion vector (MV) of the EL. In the MC process, interpolation of the EL and the up-sampled RL are required when the MV of the EL has sub-pel accuracy. Because the up-sampled RL has few high frequency components, interpolation of the up-sampled RL does not give significantly new information. Therefore, the proposed method reduces the computational complexity of the GRP by skipping the interpolation of the up-sampled RL. The experiment on SHVC software (SHM-2.0) showed that the proposed method reduces the decoding time by 10 % compared to conventional GRP. The BD-rate loss of the proposed method was as low as 1.0% on the top of SHM-2.0.