• International Journal of Advanced Culture Technology
• /
• 제11권4호
• /
• pp.328-332
• /
• 2023

The Army has presented eight game-changers for future warfare through 'Army Vision 2050,' including Intelligent Combat Robots, Super Soldiers, Energy Weapons, Hypersonic Weapons, Non-lethal Weapons, Autonomous Mobile Equipment, Intelligent Command and Control Systems, and Energy Supply Systems. This study focuses on Intelligent Combat Robots, considering them as the most crucial element among the mentioned innovations. How will Intelligent Combat Robots be utilized on the future battlefield? The future battlefield is expected to take the form of combined human-robot warfare, where advancements in science and technology allow intelligent robots to replace certain human roles. Especially, tasks known as Dirty, Difficult, Dangerous, and Dull (4D) in warfare are expected to be assigned to robots. This study suggests three forms of Intelligent Robots: humanoid robots, biomimetic robots, and swarm drones.

• 한국지능시스템학회논문지
• /
• 제16권3호
• /
• pp.275-284
• /
• 2006

본 논문에서는 자율이동로봇이 주위 환경을 알지 못하는 상황에서 목표점까지 안전하게 주행하게 하는 주행 알고리즘에 대해 연구한다. 주행 알고리즘에서 가장 고려해야할 부분이 장애물 회피 알고리즘인데, 본 논문에서는 장애물 회피 알고리즘인 VFH(Vector Field Histogram) 알고리즘과 퍼지 알고리즘을 조합하여 여러 가지 형태의 환경에서 최적의 성능을 내도록 한다. 로봇이 처한 환경에 따라 상위 레벨의 supervisor가 위의 두 가지 장애물 회피 알고리즘 중 적절한 것을 선택하도록 조합하고, 다양한 환경에서 모의실험을 수행함으로써 제안된 로봇주행 알고리즘의 성능을 검증한다.

• 한국지능시스템학회논문지
• /
• 제24권2호
• /
• pp.111-116
• /
• 2014

투명 장애물이 포함된 환경에서 레이저 거리 측정기만을 사용하여 장애물을 인식하다는 것은 이동 로봇이 장애물과의 충돌로부터 자유로운 자율 주행을 보장할 수 없는 문제를 야기한다. 이를 해결하기 위해 레이저 거리 측정기를 사용하는 이동 로봇은 투명 장애물을 인식할 수 있는 초음파 센서와 같은 추가적인 센서를 사용해야 한다. 본 논문에서는 레이저 거리 측정기만을 이용하여 환경 내에 존재하는 투명 장애물을 인식할 수 있도록 하는 투명 장애물 인식 알고리즘을 제안한다. 투명 장애물 인식 알고리즘은 레이저 거리 측정기를 이용하여 투명 장애물을 인식하였을 경우, 투명 장애물에 의해 발생되는 반사 잡음(reflected noise)만을 추출하여 이를 처리함으로서 투명 장애물의 위치를 찾도록 하는 것이다. 이를 통해 이동 로봇은 투명 장애물 환경에서 레이저 거리 측정기만을 사용하더라도 장애물과의 충돌로부터 자유로운 자율 주행을 보장받을 수 있다. 또한 본 논문에서 제안한 알고리즘의 유효성을 평가하기 위해 세 가지의 실험 환경에서 실제 이동 로봇 및 레이저 거리 측정기를 사용하여 측정하였다.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제4권1호
• /
• pp.23-28
• /
• 2004

This paper proposes a sensor-fusion technique where the data sets for the previous moments are properly transformed and fused into the current data sets to enable accurate measurement, such as, distance to an obstacle and location of the service robot itself. In the conventional fusion schemes, the measurement is dependent on the current data sets. As the results, more of sensors are required to measure a certain physical parameter or to improve the accuracy of the measurement. However, in this approach, instead of adding more sensors to the system, the temporal sequence of the data sets are stored and utilized for the measurement improvement. Theoretical basis is illustrated by examples and the effectiveness is proved through the simulations. Finally, the new space and time sensor fusion(STSF) scheme is applied to the control of a mobile robot in an unstructured environment as well as structured environment.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제3권2호
• /
• pp.206-214
• /
• 2003

In this paper, we propose a method to avoid obstacles that have unstable limit cycles in a chaos trajectory surface. We assume all obstacles in the chaos trajectory surface have a Van der Pol equation with an unstable limit cycle. When a chaos robot meets an obstacle in an Arnold equation or Chua's equation trajectory, the obstacle reflects the robot. We also show computer simulation results of Arnold equation and Chua's equation and random walk chaos trajectories with one or more Van der Pol obstacles and compare the coverage rates of each trajectory. We show that the Chua's equation is slightly more efficient in coverage rates when two robots are used, and the optimal number of robots in either the Arnold equation or the Chua's equation is also examined.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제16권3호
• /
• pp.188-196
• /
• 2016

For the balancing control of a one-wheel mobile robot, CMG (Control Moment Gyro) can be used as a gyroscopic actuator. Balancing control has to be done in the roll angle direction by an induced gyroscopic motion. Since the dedicated CMG cannot produce the rolling motion of the body directly, the yawing motion with the help of the frictional reaction can be used. The dynamic uncertainties including the chattering of the control input, disturbances, and vibration during the flipping control of the high rotating flywheel, however, cause ill effect on the balancing performance and even lead to the instability of the system. Fuzzy compensation is introduced as an auxiliary control method to prevent the robot from the failure due to leaning aside of the flywheel. Simulation studies are conducted to see the feasibility of the proposed control method. In addition, experimental studies are conducted for the verification of the proposed control.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.2502-2507
• /
• 2003

In this paper, a crack sealing robot is developed. The crack sealing robot is built to detect, track, and seal the crack on the pavement. The sealing robot is required to brush all dirt in the crack out for preparing a better sealing job. Camera calibration has been done to get accurate crack position. In order to perform a cleaning job, the explicit force control method is used to regulate a specified desired force in order to maintain constant contact with the ground. Experimental studies of force tracking control are conducted under unknown environment stiffness and location. Crack tracking control is performed. Force tracking results are excellent and the robot finds and tracks the crack very well.

• 한국정밀공학회지
• /
• 제22권9호
• /
• pp.85-92
• /
• 2005

This paper describes the recognition method of small-obstacles using a camera for a mobile robot in indoor environment. The technique of image processing using a camera has been widely used for an automaton of industrial system, an inspection of inferior goods, a lookout of an invader, and a vision sensor of intelligent robot. Mobile robot could meet small-obstacles such as a small plastic bottle of about 0.5 l in quantity, a small box of $7{\times}7{\times}7cm^3$ in volume, and so on in its designated path, and could be disturbed by them in the locomotion of a mobile robot. So, it is necessary to research on the recognition of small-obstacles using a camera and program. In this paper, 2-D image processing algorism and method fur recognition of small-obstacles using a camera for a mobile robot in indoor environment was developed. The characteristic test of the developed program to confirm the recognition of small-obstacles was performed. It is shown that the developed program could judge the size and the position of small-obstacles accurately.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.36.6-36
• /
• 2001

The problem of robot navigation and control is a complex task. Its complexity and characteristics depends on the characteristics of the environment robot inhabits, robot construction (mechanical abilities to move, sense) and the job the robot is supposed to do. In this paper we propose a hybrid programming approach to mobile robot navigation and control in an indoor environment. In our approach we used declarative, procedural, and object oriented programming paradigms and we utilized some advantages of our distributed computing architecture. The programming languages corresponding to the paradigms we used were C, C++ and Prolog. In the paper we present some details of our mobile robot hardware and software structure, focusing on the software design and implementation.

• 제어로봇시스템학회논문지
• /
• 제15권4호
• /
• pp.365-371
• /
• 2009

A intelligent mobile hexapod robot with various types of sensors and wireless camera is introduced. We show this mobile robot can detect objects well by combining the results of active sensors and image processing algorithm. First, to detect objects, active sensors such as infrared rays sensors and supersonic waves sensors are employed together and calculates the distance in real time between the object and the robot using sensor's output. The difference between the measured value and calculated value is less than 5%. This paper suggests effective visual detecting system for moving objects with specified color and motion information. The proposed method includes the object extraction and definition process which uses color transformation and AWUPC computation to decide the existence of moving object. We add weighing values to each results from sensors and the camera. Final results are combined to only one value which represents the probability of an object in the limited distance. Sensor fusion technique improves the detection rate at least 7% higher than the technique using individual sensor.