• Title/Summary/Keyword: Integration power system

Search Result 536, Processing Time 0.03 seconds

Analysis of Current Limiting Characteristics According to Fault Angles in Integrated Three-Phase Flux-Lock Type Superconducting Fault Current Limiting (일체화된 삼상 자속구속형 고온초전도 전류제한기의 사고각에 따른 전류제한 특성 분석)

  • Park, Chung-Ryul;Du, Ho-Ik;Yim, Seong-Woo;Hyun, Ok-Bae;Lim, Sung-Hun;Park, Hyoung-Min;Cho, Yong-Sun;Nam, Gueng-Hyun;Lee, Na-Young;Choi, Hyo-Sang;Han, Byoung-Sung
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2006.06a
    • /
    • pp.255-256
    • /
    • 2006
  • In this paper, we investigated the. characteristics of fault current limiting according to fault angle in the integrated three-phase flux-lock type SFCL in fault types such as the single-line-to-ground fault, the double-line-to-ground fault and the three-line-to-ground fault. When the SFCL is operating under normal condition, the magnetic flux generated between primary and secondary coils of each single phase is canceled out perfectly, so that the impedance of the SFCL is also not generated and the power system can be operated normally without any loss, However, if a fault occurs even in any phase out of three phases, quench happened in SFCL elements and the current flowing secondary coil is restricted abruptly. Finally, the balance of magnetic flux in whole SFCL system is destroyed, and the fault currents in every phase could be limited at the same time irrespective of the fault types. As a result, the developed SFCL in this study were operated normally as expected and the purpose of the integration of 3 phase current limiting was also achieved successfully. However, the fault current limiting characteristics of the SFCL was dependant on the quench characteristics of HTSC elements in each phase, and it was expected that the improvement of the SFCL could be possible through the introduction of HTSC elements which have better critical characteristics.

  • PDF

Stand-alone Real-time Healthcare Monitoring Driven by Integration of Both Triboelectric and Electro-magnetic Effects (실시간 헬스케어 모니터링의 독립 구동을 위한 접촉대전 발전과 전자기 발전 원리의 융합)

  • Cho, Sumin;Joung, Yoonsu;Kim, Hyeonsu;Park, Minseok;Lee, Donghan;Kam, Dongik;Jang, Sunmin;Ra, Yoonsang;Cha, Kyoung Je;Kim, Hyung Woo;Seo, Kyoung Duck;Choi, Dongwhi
    • Korean Chemical Engineering Research
    • /
    • v.60 no.1
    • /
    • pp.86-92
    • /
    • 2022
  • Recently, the bio-healthcare market is enlarging worldwide due to various reasons such as the COVID-19 pandemic. Among them, biometric measurement and analysis technology are expected to bring about future technological innovation and socio-economic ripple effect. Existing systems require a large-capacity battery to drive signal processing, wireless transmission part, and an operating system in the process. However, due to the limitation of the battery capacity, it causes a spatio-temporal limitation on the use of the device. This limitation can act as a cause for the disconnection of data required for the user's health care monitoring, so it is one of the major obstacles of the health care device. In this study, we report the concept of a standalone healthcare monitoring module, which is based on both triboelectric effects and electromagnetic effects, by converting biomechanical energy into suitable electric energy. The proposed system can be operated independently without an external power source. In particular, the wireless foot pressure measurement monitoring system, which is rationally designed triboelectric sensor (TES), can recognize the user's walking habits through foot pressure measurement. By applying the triboelectric effects to the contact-separation behavior that occurs during walking, an effective foot pressure sensor was made, the performance of the sensor was verified through an electrical output signal according to the pressure, and its dynamic behavior is measured through a signal processing circuit using a capacitor. In addition, the biomechanical energy dissipated during walking is harvested as electrical energy by using the electromagnetic induction effect to be used as a power source for wireless transmission and signal processing. Therefore, the proposed system has a great potential to reduce the inconvenience of charging caused by limited battery capacity and to overcome the problem of data disconnection.

A Study on the Determinant Factors of Newspaper Headlines : Focused on News Influence Variables, Editor's Role Orientation and Professionalism (신문기사 제목의 결정요인에 관한 연구 : 뉴스 영향변인.편집자의 역할지향성과 전문직업관을 중심으로)

  • Kang, Hyun-Jig
    • Journal of Digital Convergence
    • /
    • v.10 no.8
    • /
    • pp.347-365
    • /
    • 2012
  • This study was carried out to enlighten on the factors by which newspaper headlines are determined and to empirically explore how news influence variables, editor's role orientation and professionalism have impact on deciding headlines. It turned out from the survey of 345 journalists working in the editorial departments of 17 major national daily and economic newspapers that 7 determinant factors have impact on editors deciding headlines: creativity, standardized expression, fairness, consideration for a readers, reflection of company policy, summarization and intriguer. In addition, the determinant factors of headlines were analyzed to have correlation with news influence variables such as the government-sponsors, readers and colleagues, and company policy and the management. In the awareness of role, also, it was shown that the editors who considered social integration as important place weighted on the reflection of company policy, fairness and creativity; those editors who placed power monitoring on priority took fairness and creativity seriously; and the editors who believed that delivering information was important thought of fairness, consideration for a readers and summarization as important. In addition, the organization-oriented editors turned out compliant to a system, positive on the governmental policies and sought for social stability; those editors who put a premium on a sense of objective balance and neutrality showed a strong aspect of a professional in social reform, check against government and the social governance by the privileged.

XML Web Services for Learning ContentsBased on a Pedagogical Design Model (교수법적 설계 모델링에 기반한 학습 컨텐츠의 XML 웹 서비스 구축)

  • Shin, Haeng-Ja;Park, Kyung-Hwan
    • Journal of Korea Multimedia Society
    • /
    • v.7 no.8
    • /
    • pp.1131-1144
    • /
    • 2004
  • In this paper, we investigate a problem with an e-learning system for e-business environments and introduce the solving method of the problem. To be more accurate, existing Web-hosted and ASP (Application Service Provider)-oriented service model is difficult to cooperate and integrate among the different kinds of systems. So we have produced sharable and reusable learning object, they have extracted a principle from pedagogical designs for units of reuse. We call LIO (Learning Item Object). This modeling makes use of a constructing for XML Web Services. So to speak, units of reuse from pedagogical designs are test tutorial, resource, case example, simulation, problem, test, discovery and discussion and then map introduction, fact, try, quiz, test, link-more, tell-more LIO learning object. These typed LIOs are stored in metadata along with the information for a content location. Each one of LIOs is designed with components and exposed in an interface for XML Web services. These services are module applications, which are used a standard SOAP (Simple Object Access Protocol) and locate any computer over Internet and publish, find and bind to services. This guarantees the interoperation and integration of the different kinds of systems. As a result, the problem of e-learning systems for e-business environments was resolved and then the power of understanding about learning objects based on pedagogical design was increased for learner and instruction designers. And organizations of education hope for particular decreased costs in constructing e-learning systems.

  • PDF

A Study on the SCM Integration & Green Growth Strategy of Logistic Company in Korea (물류기업의 SCM통합과 녹색성장을 위한 대응방안에 대한 연구)

  • Jin, Yun-Jun;Lee, Yu-Bin;Bae, Ki-Hyung
    • International Commerce and Information Review
    • /
    • v.15 no.2
    • /
    • pp.3-23
    • /
    • 2013
  • In 1997, 180 countries signed the Kyoto Protocol in Kyoto, Japan. The Kyoto Protocol came into force in February 2005. The agreement calls for industrialized nations to cut greenhouse gas emissions by 5 percent from 1990 levels by 2008 to 2012. One of those polices is a modal shift that change from road freight to sea, inland waterway and railroad transportation that is eco-friendly. The increase of road freight brings road congestion, accidents, logistic costs, air pollution and greenhouse gases. Railroads are superior than the other modes of transportation in mass transportability, high speed, timeliness, safety and environmental-friendliness, but the railway industry has been pushed behind in competition. Korean railroads were used by passengers and freight transport popularly until the middle of 20th century, however, by the sudden change of logistics environments, a shaving time efficiency being most important, railroad logistic lost its competitive power against the transportation by truck. From the research which sees consequently investigated a various policy, a system and a law about Chinese logistics industry and present condition of the Chinese goods enterprise and instance analysis of the large Chinese corporation that branch out to undeveloped markets led and a Chinese logistics industry and problem point escape hereafter the heightening of competitiveness plan which is rational under prsenting boil.

  • PDF

Microstructural Characteristics of III-Nitride Layers Grown on Si(110) Substrate by Molecular Beam Epitaxy

  • Kim, Young Heon;Ahn, Sang Jung;Noh, Young-Kyun;Oh, Jae-Eung
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2014.02a
    • /
    • pp.327.1-327.1
    • /
    • 2014
  • Nitrides-on-silicon structures are considered to be an excellent candidate for unique design architectures and creating devices for high-power applications. Therefore, a lot of effort has been concentrating on growing high-quality III-nitrides on Si substrates, mostly Si(111) and Si(001) substrates. However, there are several fundamental problems in the growth of nitride compound semiconductors on silicon. First, the large difference in lattice constants and thermal expansion coefficients will lead to misfit dislocation and stress in the epitaxial films. Second, the growth of polar compounds on a non-polar substrate can lead to antiphase domains or other defective structures. Even though the lattice mismatches are reached to 16.9 % to GaN and 19 % to AlN and a number of dislocations are originated, Si(111) has been selected as the substrate for the epitaxial growth of nitrides because it is always favored due to its three-fold symmetry at the surface, which gives a good rotational matching for the six-fold symmetry of the wurtzite structure of nitrides. Also, Si(001) has been used for the growth of nitrides due to a possible integration of nitride devices with silicon technology despite a four-fold symmetry and a surface reconstruction. Moreover, Si(110), one of surface orientations used in the silicon technology, begins to attract attention as a substrate for the epitaxial growth of nitrides due to an interesting interface structure. In this system, the close lattice match along the [-1100]AlN/[001]Si direction promotes the faster growth along a particular crystal orientation. However, there are insufficient until now on the studies for the growth of nitride compound semiconductors on Si(110) substrate from a microstructural point of view. In this work, the microstructural properties of nitride thin layers grown on Si(110) have been characterized using various TEM techniques. The main purpose of this study was to understand the atomic structure and the strain behavior of III-nitrides grown on Si(110) substrate by molecular beam epitaxy (MBE). Insight gained at the microscopic level regarding how thin layer grows at the interface is essential for the growth of high quality thin films for various applications.

  • PDF

Global Value Chains and Creating Shared Value in Vietnamese Coffee Frontier (베트남 커피변경지역의 글로벌 가치사슬과 공유가치 창출)

  • Lee, Sung-Cheol;Chung, Su-Yuel;Joh, Young-Kug
    • Journal of the Economic Geographical Society of Korea
    • /
    • v.19 no.2
    • /
    • pp.399-416
    • /
    • 2016
  • The main aim of the research attempts to identify value relations appropriated and realized in the coffee frontier of Vietnam by investigating the ways in which it is integrated into coffee global value chains driven by multinational companies, and to provide some implications of the integration of the frontier into sustainable coffee global value chains for creating shared value in Dak Lak, Vietnam. Recently Dak Lak has gone through the transition of value relations from exploitative value chains based upon conventional coffee production into shared value chains relied upon the production of sustainable or certified coffee in Dak Lak. The transition has been expected to result in sustainability in the creation of value by enhancing regional competitive advantages and regional bargaining power in global value chains driven by multinational companies. However, the reality has shown the intensification of hierarchical profits allocation among stakeholders such as farmer, middlemen, and multinational companies in the region. The main reasons for this could be found in two perspectives. Firstly, the formation of exclusive relations among farmers, middlemen, and processors has led to stakeholders to secure market, but resulted in the intensification of hierarchy among them in global value chain, because multinational companies could control indirectly over the farming system through exclusive middlemen. Secondly, social and ecological costs imputed by multinational companies to coffee farmers in the name of creating shared value has deteriorated the economic profits of stakeholders such as farmers and middlemen. As a result, it has led to the configuration of systematically hierarchical and subordinated global value chain in Dak Lak.

  • PDF

A Study for Korea Small Business Enterprise Policy and Vision (중소기업의 정책방안과 비전에 관한 연구)

  • Heo Kap-Soo
    • Management & Information Systems Review
    • /
    • v.15
    • /
    • pp.109-145
    • /
    • 2004
  • Upcoming 21st century, Management circumstance for a small and medium enterprise have been rapidly changed by Knowledge management, Informationization, Hi-technology. Changing from an era of small concept to strong concept, It will be a severe innovation period and can not survive with life as the same as the past, It is the era of best which mean only the best can survive, None of the average faculty can survive. Due to rapid proceeding of innovation of Informationization, It stimulate acceleration of technology innovation, infinity competition regardless the nation boarder, result in proceeding to Informationization. A small and medium enterprise is defined as smaller size of business than big business as point of capital, employee, output. It is concept, which usually used against concept of big business. When define a small and medium enterprise, criteria to determine a small and medium enterprise is depends on country and a category of business. However, In every country, A small and medium enterprise is getting be bigger and importance factor in whole industry. A small and medium enterprise is well developed and also well balanced with a large enterprise in the developed country. All around in the world, Interest about a small and medium enterprise is becoming higher. It is actively researching into a small and medium enterprise as the mean to create new employment, new industry, as means to from integration of a all and medium enterprise,as source of high competitive power. The status quo of rapid changing into informationization have been realized at considerable level in Korea. Information society is defined as information technology is main key to determine individuals competitiveness, which can solve effectively the side effect result from industrialization. It cleary imply that information technology is the most promising and important industry in 21st century. Therefore, We should seek to foster independent a small and medium enterprise and develop them corresponding to new concept of a small and medium enterprise in 21st century. The main frame of policy should be new economic system, which can contribute establishment of a small and medium enterprise, management innovation. It also attribute a small and medium enterprise to reveal their creative. New economic paradigm in 21st will be expanded with organization, market, technology. So far, a small and medium enterprise has been acknowledge as economic weaker and the one should be protected. However, In 21st century a small and medium enterprise will be considered as active majority or a source of creative. Development of technology to produce a small quantity with variety product and acceleration of knowledge and informationization will result in comparative merits of a small and medium enterprise. Hereby, The role and relative importance of a small and medium enterprise in our economic will getting be larger and It will be developed as the main force to activate the economic. However, Only a small and medium enterprise, which overcome difficulty with active desire and effort to improve their lot can be developed as a competitive enterprise in 21st century in considering themselves to be developed as diversity, active, independent, business by an enterprise.

  • PDF

Analysis of major issues in the field of Maritime Autonomous Surface Ships using text mining: focusing on S.Korea news data (텍스트 마이닝을 활용한 자율운항선박 분야 주요 이슈 분석 : 국내 뉴스 데이터를 중심으로)

  • Hyeyeong Lee;Jin Sick Kim;Byung Soo Gu;Moon Ju Nam;Kook Jin Jang;Sung Won Han;Joo Yeoun Lee;Myoung Sug Chung
    • Journal of the Korean Society of Systems Engineering
    • /
    • v.20 no.spc1
    • /
    • pp.12-29
    • /
    • 2024
  • The purpose of this study is to identify the social issues discussed in Korea regarding Maritime Autonomous Surface Ships (MASS), the most advanced ICT field in the shipbuilding industry, and to suggest policy implications. In recent years, it has become important to reflect social issues of public interest in the policymaking process. For this reason, an increasing number of studies use media data and social media to identify public opinion. In this study, we collected 2,843 domestic media articles related to MASS from 2017 to 2022, when MASS was officially discussed at the International Maritime Organization, and analyzed them using text mining techniques. Through term frequency-inverse document frequency (TF-IDF) analysis, major keywords such as 'shipbuilding,' 'shipping,' 'US,' and 'HD Hyundai' were derived. For LDA topic modeling, we selected eight topics with the highest coherence score (-2.2) and analyzed the main news for each topic. According to the combined analysis of five years, the topics '1. Technology integration of the shipbuilding industry' and '3. Shipping industry in the post-COVID-19 era' received the most media attention, each accounting for 16%. Conversely, the topic '5. MASS pilotage areas' received the least media attention, accounting for 8 percent. Based on the results of the study, the implications for policy, society, and international security are as follows. First, from a policy perspective, the government should consider the current situation of each industry sector and introduce MASS in stages and carefully, as they will affect the shipbuilding, port, and shipping industries, and a radical introduction may cause various adverse effects. Second, from a social perspective, while the positive aspects of MASS are often reported, there are also negative issues such as cybersecurity issues and the loss of seafarer jobs, which require institutional development and strategic commercialization timing. Third, from a security perspective, MASS are expected to change the paradigm of future maritime warfare, and South Korea is promoting the construction of a maritime unmanned system-based power, but it emphasizes the need for a clear plan and military leadership to secure and develop the technology. This study has academic and policy implications by shedding light on the multidimensional political and social issues of MASS through news data analysis, and suggesting implications from national, regional, strategic, and security perspectives beyond legal and institutional discussions.

An Empirical Study on the Determinants of Supply Chain Management Systems Success from Vendor's Perspective (참여자관점에서 공급사슬관리 시스템의 성공에 영향을 미치는 요인에 관한 실증연구)

  • Kang, Sung-Bae;Moon, Tae-Soo;Chung, Yoon
    • Asia pacific journal of information systems
    • /
    • v.20 no.3
    • /
    • pp.139-166
    • /
    • 2010
  • The supply chain management (SCM) systems have emerged as strong managerial tools for manufacturing firms in enhancing competitive strength. Despite of large investments in the SCM systems, many companies are not fully realizing the promised benefits from the systems. A review of literature on adoption, implementation and success factor of IOS (inter-organization systems), EDI (electronic data interchange) systems, shows that this issue has been examined from multiple theoretic perspectives. And many researchers have attempted to identify the factors which influence the success of system implementation. However, the existing studies have two drawbacks in revealing the determinants of systems implementation success. First, previous researches raise questions as to the appropriateness of research subjects selected. Most SCM systems are operating in the form of private industrial networks, where the participants of the systems consist of two distinct groups: focus companies and vendors. The focus companies are the primary actors in developing and operating the systems, while vendors are passive participants which are connected to the system in order to supply raw materials and parts to the focus companies. Under the circumstance, there are three ways in selecting the research subjects; focus companies only, vendors only, or two parties grouped together. It is hard to find researches that use the focus companies exclusively as the subjects probably due to the insufficient sample size for statistic analysis. Most researches have been conducted using the data collected from both groups. We argue that the SCM success factors cannot be correctly indentified in this case. The focus companies and the vendors are in different positions in many areas regarding the system implementation: firm size, managerial resources, bargaining power, organizational maturity, and etc. There are no obvious reasons to believe that the success factors of the two groups are identical. Grouping the two groups also raises questions on measuring the system success. The benefits from utilizing the systems may not be commonly distributed to the two groups. One group's benefits might be realized at the expenses of the other group considering the situation where vendors participating in SCM systems are under continuous pressures from the focus companies with respect to prices, quality, and delivery time. Therefore, by combining the system outcomes of both groups we cannot measure the system benefits obtained by each group correctly. Second, the measures of system success adopted in the previous researches have shortcoming in measuring the SCM success. User satisfaction, system utilization, and user attitudes toward the systems are most commonly used success measures in the existing studies. These measures have been developed as proxy variables in the studies of decision support systems (DSS) where the contribution of the systems to the organization performance is very difficult to measure. Unlike the DSS, the SCM systems have more specific goals, such as cost saving, inventory reduction, quality improvement, rapid time, and higher customer service. We maintain that more specific measures can be developed instead of proxy variables in order to measure the system benefits correctly. The purpose of this study is to find the determinants of SCM systems success in the perspective of vendor companies. In developing the research model, we have focused on selecting the success factors appropriate for the vendors through reviewing past researches and on developing more accurate success measures. The variables can be classified into following: technological, organizational, and environmental factors on the basis of TOE (Technology-Organization-Environment) framework. The model consists of three independent variables (competition intensity, top management support, and information system maturity), one mediating variable (collaboration), one moderating variable (government support), and a dependent variable (system success). The systems success measures have been developed to reflect the operational benefits of the SCM systems; improvement in planning and analysis capabilities, faster throughput, cost reduction, task integration, and improved product and customer service. The model has been validated using the survey data collected from 122 vendors participating in the SCM systems in Korea. To test for mediation, one should estimate the hierarchical regression analysis on the collaboration. And moderating effect analysis should estimate the moderated multiple regression, examines the effect of the government support. The result shows that information system maturity and top management support are the most important determinants of SCM system success. Supply chain technologies that standardize data formats and enhance information sharing may be adopted by supply chain leader organization because of the influence of focal company in the private industrial networks in order to streamline transactions and improve inter-organization communication. Specially, the need to develop and sustain an information system maturity will provide the focus and purpose to successfully overcome information system obstacles and resistance to innovation diffusion within the supply chain network organization. The support of top management will help focus efforts toward the realization of inter-organizational benefits and lend credibility to functional managers responsible for its implementation. The active involvement, vision, and direction of high level executives provide the impetus needed to sustain the implementation of SCM. The quality of collaboration relationships also is positively related to outcome variable. Collaboration variable is found to have a mediation effect between on influencing factors and implementation success. Higher levels of inter-organizational collaboration behaviors such as shared planning and flexibility in coordinating activities were found to be strongly linked to the vendors trust in the supply chain network. Government support moderates the effect of the IS maturity, competitive intensity, top management support on collaboration and implementation success of SCM. In general, the vendor companies face substantially greater risks in SCM implementation than the larger companies do because of severe constraints on financial and human resources and limited education on SCM systems. Besides resources, Vendors generally lack computer experience and do not have sufficient internal SCM expertise. For these reasons, government supports may establish requirements for firms doing business with the government or provide incentives to adopt, implementation SCM or practices. Government support provides significant improvements in implementation success of SCM when IS maturity, competitive intensity, top management support and collaboration are low. The environmental characteristic of competition intensity has no direct effect on vendor perspective of SCM system success. But, vendors facing above average competition intensity will have a greater need for changing technology. This suggests that companies trying to implement SCM systems should set up compatible supply chain networks and a high-quality collaboration relationship for implementation and performance.