• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.2096-2100
• /
• 2008

This research project management, building systems to test the performance requirements of a user to accept the plan and schedule management, personnel management, and test results, and the status of testing and reporting procedures to handle the process of implementation of Java-based X - Under the Internet environment, the default network, remote process research and development program as a test automation, structure and each module of the software analysis, design, analysis and clean-up and structure of the modules, each module and the GUI structure, performance, testing integration DB The present system is to study the system.

• ETRI Journal
• /
• v.45 no.1
• /
• pp.60-74
• /
• 2023

Integration of the machine learning (ML) technique in all-optical networks can enhance the effectiveness of resource utilization, quality of service assurances, and scalability in optical networks. All-optical multistage interconnection networks (MINs) are implicitly designed to withstand the increasing highvolume traffic demands at data centers. However, the contention resolution mechanism in MINs becomes a bottleneck in handling such data traffic. In this paper, a select list of ML algorithms replaces the traditional electronic signal processing methods used to resolve contention in MIN. The suitability of these algorithms in improving the performance of the entire network is assessed in terms of injection rate, average latency, and latency distribution. Our findings showed that the ML module is recommended for improving the performance of the network. The improved performance and traffic grooming capabilities of the module are also validated by using a hardware testbed.

• Nuclear Engineering and Technology
• /
• v.56 no.2
• /
• pp.673-684
• /
• 2024

STREAM, developed by the Computational Reactor Physics and Experiment laboratory (CORE) of the Ulsan National Institute of Science and Technology (UNIST), is a deterministic neutron- and photon-transport code primarily designed for light water reactor (LWR) analysis. Initially, the photon module in STREAM did not account for fluorescence and bremsstrahlung photons. This article presents recent developments regarding the integration of atomic relaxation and bremsstrahlung models into the existing photon module, thus allowing for the transport of secondary photons. The photon flux and photon heating computed with the newly incorporated models is compared to results obtained with the Monte Carlo code MCS. The incorporation of secondary photons has substantially improved the accuracy of photon flux calculations, particularly in scenarios involving strong gamma emitters. However, it is essential to note that despite the consideration of secondary photon sources, there is no noticeable improvement in the photon heating for LWR problems when compared to the photon heating obtained with the previous version of STREAM.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.6
• /
• pp.797-803
• /
• 2012

In this paper, for minimizing the real-time operating load losses of the power transformer, a SCADA optimum operating system was developed, and the economic analyses on the test operation were performed. Transformer loss DB which reflects the economic integration operation criteria was constructed by referring the transformer manufacturer's loss data(iron loss, copper loss). Based on the loss DB, each substation transformer real-time loss was calculated according to the size of the transformer loads, and if integration or separation transformer operating conditions minimizing the loss are met, then a window pops-up and the dispatcher performs the substation equipments operation according to the procedure provided by this system. With the existing SCADA main program, the relation database of the substation facilities and integration/separation operation algorithm were developed and applied to Auto MTR Processor and pconn Processor Task module. Seven stations test data for seven months were analyzed for the economic analyses, and the results showed that Cost-Benefit ratio was 2.64, and IRR(Internal Rate of Return), 36%, which asserted the economic justification of the proposed system.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.1217-1219
• /
• 2003

상용화되어 있는 이동통신 기기의 Front-end 부분은 듀플렉서와 필터를 포함하는 수동소자로 구성되어 있다. 듀플렉서의 임피던스 정합선로는 전송선로 이론으로부터 설계하며, 단순하게 ${\lambda}=1/4$ 파장 길이의 정합 선로를 설치하는 것이기 때문에 정합선로를 이용한 듀플렉서 성능을 극대화하기 위한 설계의 융통성이 없는게 현실이다. 이런 문제점을 해결하기 위하여 집중소자(lumped element)인 R L C를 탄성 표면파 듀플렉서 대신 스위치 모들에 적용하게 된다면 여러 가지 다양한 형태의 회로를 구현할 수 있고 회로망 내에 위치하는 집중소자의 정격을 최적화하여 스위치 모듈의 성능을 향상시킬 수 있는 가능성이 있다. 본 연구에서는 $900 MHz{\sim}2.2 GHz$의 대역에서 소형화 집적화에 적용 가능한 디바이스를 개발하기 위하여 고주파, 저진압, 저손실 스위치 모듈의 제조와 구성되는 커패시터와 인덕터의 제조와 특성에 관하여 연구하였다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2022.11a
• /
• pp.55-56
• /
• 2022

Hypertension is a severe health problem and increases the risk of other health issues, such as heart disease, heart attack, and stroke. In this research, we propose a machine learning-based prediction method for the risk of chronic hypertension. The proposed method consists of four main modules. In the first module, the linear interpolation method fills missing values of the integration of gas and meteorological datasets. In the second module, the OrdinalEncoder-based normalization is followed by the Decision tree algorithm to select important features. The prediction analysis module builds three models based on k-Nearest Neighbors, Decision Tree, and Random Forest to predict hypertension levels. Finally, the features used in the prediction model are explained by the DeepSHAP approach. The proposed method is evaluated by integrating the Korean meteorological agency dataset, natural gas leakage dataset, and Korean National Health and Nutrition Examination Survey dataset. The experimental results showed important global features for the hypertension of the entire population and local components for particular patients. Based on the local explanation results for a randomly selected 65-year-old male, the effect of hypertension increased from 0.694 to 1.249 when age increased by 0.37 and gas loss increased by 0.17. Therefore, it is concluded that gas loss is the cause of high blood pressure.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.11
• /
• pp.2987-3002
• /
• 2023

In 2015, the number of senior citizens aged 65 and over in Korea was 6,662,400, accounting for 13.1% of the total population. Along with these social phenomena, risk information related to the elderly is increasing every year. In particular, a fall accident caused by a fall can cause serious injury to an elderly person, so special attention is required. Therefore, in this paper, we implemented a system that monitors fall accidents and informs them in real time to minimize damage caused by falls. To this end, beacon-based indoor location positioning was performed and biometric information based on an integrated module was collected using various sensors. In other words, a multi-functional sensor integration module was designed based on Arduino to collect and monitor user's temperature, heart rate, and motion data in real time. Finally, through the analysis and prediction of measurement signals from the integrated module, damage from fall accidents can be reduced and rapid emergency treatment is possible. Through this, it is possible to reduce the damage caused by a fall accident, and rapid emergency treatment will be possible. In addition, it is expected to lead a new paradigm of safety systems through expansion and application to socially vulnerable groups.

• Fashion & Textile Research Journal
• /
• v.17 no.3
• /
• pp.341-350
• /
• 2015

The purpose of this study was to suggest a silver blouse design by applying modularization. The precedent study of the researcher was used to analyze the design characteristics that were displayed in domestic and foreign silver blouses. This study was taken as the follow-up research as the module components and range of the silver blouse were set up and it was based on to suggest a silver blouse design with application of modularization. The intention was to base on the module system used in various fields to apply the modularization method on the module design research of silver blouse and as a result, it was derived into 6 types. The traditional design reflected on the characteristic of how the silver generation prioritizes practicality and in order to emphasize this, it will be more effective to apply the fastener and folding method for the development of the design. The contemporary design reflected on the characteristic of how the silver generation prioritizes aesthetics and in order to emphasize this, it will be more effective to apply the module composition method where integration can be made according to the desire of the wearer for the development of the design. The trendy design reflected on how the characteristic of the silver generation wants to look younger and the derived modularization method can be applied freely for expression. Since the range, structure, and formation where modularization can be applied are general, it is implied that there is a need to take sustainable development has to be conducted as the tool that can create different types of design.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.10
• /
• pp.805-812
• /
• 2013

The operational flight program(OFP) which has the functions of I/O processing with avionics, flight control logic calculation, fault diagnosis and redundancy mode is embedded in the flight control computer of Smart UAV. The OFP was developed in the environment of PowerPC 755 processor and VxWorks 5.5 real-time operating system. The OFP consists of memory access module, device I/O signal processing module and flight control logic module, and each module was designed to hierarchical structure. Memory access and signal processing modules were verified from bench test, and flight control logic module was verified from hardware-in-the-loop simulation(HILS) test, ground integration test, tethered test and flight test. This paper describes development environment, software structure, verification and management method of the OFP.

• Journal of Biomedical Engineering Research
• /
• v.31 no.4
• /
• pp.292-301
• /
• 2010

To restore visual sensation of blind patients, we have proposed a fully implantable retinal prosthesis comprising an three dimensionally (3D) stacked retinal chip for transforming optical signal to electrical signal, a flexible cable with stimulus electrode array for stimulating retina cells, and coupling coils for power transmission. The 3D stacked retinal chip is consisted of several LSI chips such as photodetector, signal processing circuit, and stimulus current generator. They are vertically stacked and electrically connected using 3D integration technology. Our retinal prosthesis has a small size and lightweight with high resolution, therefore it could increase the patients` quality of life (QOL). For realizing the fully implantable retinal prosthesis, we developed a retinal prosthesis module comprising a retinal prosthesis chip and a flexible cable with stimulus electrode array for generating optimal stimulus current. In this study, we used a 2D retinal chip as a prototype retinal prosthesis chip. We fabricated the polymide-based flexible cable of $20{\mu}m$ thickness where 16 channels Pt stimulus electrode array was formed in the cable. Pt electrode has an impedance of $9.9k{\Omega}$ at 400Hz frequency. The retinal prosthesis chip was mounted on the flexible cable by an epoxy and electrically connected by Au wire. The retinal prosthesis chip was cappted by a silicone to pretect from corrosive environments in an eyeball. Then, the fabricated retinal prosthesis module was implanted into an eyeball of a rabbit. We successfully recorded electrically evoked potential (EEP) elicited from the rabbit brain by the current stimulation supplied from the implanted retinal prosthesis module. EEP amplitude was increased linearly with illumination intensity and irradiation time of incident light. The retinal prosthesis chip was well functioned after implanting into the eyeball of the rabbit.