• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.12
• /
• pp.2121-2133
• /
• 1997

A finite element code is developed for 3-D self-contact problems, using continuum elements with a SRI(Selective Reduced Integration) scheme to prevent locking phenomenon by the incompressibility of rubber. Contact treatment is carried out in two ways : using the displacement constraints in case of rigid contact ; and imposing the same contact forces on two contact boundaries in case of self-contact. The finite element code developed is applied to the deformation analysis of C.V.joint boots which maintain lubrication conditions and protect the C.V.joint assembly from impact and dust. The boot accompanies large rotation depending on the rotation of the wheel axis and leading to the self-contact phenomena of the boot bellows. Since this contact phenomenon causes wear of the product and has great influence on the endurance life of the product, it is indispensable to carry out stress analysis of the rubber boots. In case of self-contact, various methods for determining contact forces have been suggested with an appropriate contact formulation. Especially, the types of penetration in self-contact are modularized to accelerate conputation with a contact algorithm.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.2
• /
• pp.432-445
• /
• 1994

From a theoretical analysis point of view, the 2-stage precipitator is decomposed into two units: charging cell and collecting cell. Collection efficiency predictions of the two-stage parallel-plate electrostatic precipitator have been performed theoretically incorporating with the charging and the collecting cells. Particle trajectorise passing the charging cell have been modeled as a simple one. Particle charge distribution at the outlet of the charging cell is calculated through integration of the present unipolar combined charging rate along the entire particle trajectory, and average charge of particles at the outlet of the charging cell is obtained from the particle charge distribution. As for the collecting cell, the diminution of particle concentration along the longitudinal direction of the collecting cell is investigated considering the conventional Deutsch's theory and the laminar theory. One should note that the collection efficiency formula derived is based on monodisperse aerosols. It has been confirmed through the analysis that predictions of particle charge by applying White's unipolar diffusion charging theory overpredict actual cases in the continuum regime, while predictions by Fuch's unipolar diffusion charging theory indicate the reasonable result in the same regime. Theoretical predictions of collection efficiency are also compared with the available experimental results. Comparisons show that the experimental results are consistently located in the collection efficiency region bounded by the two limits, the Deutsch and the laminar collection efficiencies. Finally design parameters of the 2-stage electrostatic precipitator have been investigated systematically through the one-variable-at-a-time method in terms of collection efficiency. Applied voltages on the corona wire of the charging cell and the plate of the collecting cell, and the average air velocity have been selected as the design parameters.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.178-178
• /
• 2010

With the scaling down of ULSI(Ultra Large Scale Integration) circuit of CMOS(Complementary Metal Oxide Semiconductor)based electronic devices, the electronic devices become more faster and smaller size that are promising field of semiconductor market. However, very narrow line width has some disadvantages. For example, because of narrow line width, deposition of conformal and thin barrier is difficult. Besides, proportion of barrier width is large, thus resistance is high. Conventional PVD(Physical Vapor Deposition) thin films are not able to gain a good quality and conformal layer. Hence, in order to get over these side effects, deposition of thin layer used of ALD(Atomic Layer Deposition) is important factor. Furthermore, it is essential that copper atomic diffusion into dielectric layer such as silicon oxide and hafnium oxide. If copper line is not surrounded by diffusion barrier, it cause the leakage current and devices degradation. There are some possible methods for improving the these secondary effects. In this study, TaNx, is used of Tertiarybutylimido tris (ethylamethlamino) tantalum (TBITEMAT), was deposited on the 24nm sized trench silicon oxide/silicon bi-layer substrate with good step coverage and high quality film using plasma enhanced atomic layer deposition (PEALD). And then copper was deposited on TaNx barrier using same deposition method. The thickness of TaNx was 4~5 nm. TaNx film was deposited the condition of under $300^{\circ}C$ and copper deposition temperature was under $120^{\circ}C$, and feeding time of TaNx and copper were 5 seconds and 5 seconds, relatively. Purge time of TaNx and copper films were 10 seconds and 6 seconds, relatively. XRD, TEM, AFM, I-V measurement(for testing leakage current and stability) were used to analyze this work. With this work, thin barrier layer(4~5nm) with deposited PEALD has good step coverage and good thermal stability. So the barrier properties of PEALD TaNx film are desirable for copper interconnection.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.970-973
• /
• 2012

In cloud environment, enterprises use a number of systems which are not interconnected and save master information in a distributed way in each of them. Master information which is not managed is incorrect and discord each other so that lowers efficiency of business process and disables optimum decision making. It is necessary to do high-qualified management of master information to operate efficient and errorless business process. This paper suggests TMDM as a solution to solve heterogeneous problems occurred between interconnected master information in cloud environment and to manage business process in an efficient method. TMDM is an information storage that is suggested to solve mutual discord problems between master information using Topic Maps that considers correlation between data. Topic Maps can be connected by association between topics in order to access through a topic to all related knowledge information which is described by the topic. This also can be applied to master information between legacy systems within cloud.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.8
• /
• pp.1989-1999
• /
• 1999

Many people are the latest interested in the integration of the WWW and database systems. The UCM(United CGI Management) system, which is proposed on this study, is based on the method using CGI that does not change existing servers and clients to integrate the WWW and database system. Since the CGI executable architecture executes a CGI program whenever the database is accessed, the system performance is reduced greatly when many request to the database are made simultaneously. However, the UCM system improves the system performance since it uses the integrated CGI running a daemon process. Moreover, the proposed system can use the WWW database more economically and doesn't use the SQL because it does not use a DBMS. In UCM system, we define the extended HTML tags to implement the WWW database interface and use the EXODUS storage manager for accessing the database.

• Journal of Power Electronics
• /
• v.16 no.5
• /
• pp.1904-1917
• /
• 2016

The moving average filter (MAF) is widely utilized to improve the disturbance rejection capability of phase-locked loops (PLLs). This is of vital significance for the grid-integration and stable operation of power electronic converters to electric power systems. However, the open-loop bandwidth is drastically reduced after incorporating a MAF into the PLL structure, which makes the dynamic response sluggish. To overcome this shortcoming, some new techniques have recently been proposed to improve the transient response of MAF-based PLLs. In this paper, a comprehensive performance comparison of advanced MAF-based PLL algorithms is presented. This comparison includes HPLL, MPLC-PLL, QT1-PLL, and DMAF-PLL. Various disturbances, such as grid voltage sag, voltage flicker, harmonics distortion, phase-angle and frequency jumps, DC offsets and noise, are considered to experimentally test the dynamic performances of these PLL algorithms. Finally, an improved positive sequence extraction method for a HPLL under the frequency jumps scenario is presented to compensate for the steady-state error caused by non-frequency adaptive DSC, and a satisfactory performance has been achieved.

• Journal of the Korea Institute of Building Construction
• /
• v.18 no.5
• /
• pp.463-469
• /
• 2018

A currently used roof green system with multi layers has a low constructability. Therefore a new integrated waterproof & root barrier sheet and roof green box unit system was developed using steel plate fixture and cone type fixture by electromagnetic induction heating method. This study was proceeded to evaluate adhesion performance of two types of fixtures on Engineering PE, TPO, PVC sheet in a normal condition, repeated heating and cooling condition. As a result, adhesion load on Engineering PE sheet showed the highest value. The adhesion loads of steel plate fixture showed higher value as heating temperature was getting higher. However adhesion loads of cone type fixture showed opposite tendency. Regarding to the test conditions, test results of normal condition, repeated heating and cooling condition showed same value. The cone type fixture using butyl tape showed 7 times lower adhesion load than that of cone type fixture using electromagnetic heating and 28% lower adhesion load in a repeated heating and cooling condition than a usual condition.

• Journal of Information Technology Services
• /
• v.15 no.1
• /
• pp.227-243
• /
• 2016

In order to maximize profitability by optimizing the entire supply chain process, enterprises have made efforts to apply IT technologies such as POS, MES, and TMS. In addition, academic societies have also made efforts to verify the effects of IT technology introduction through various researches. However, until now, there is almost no research that analyzes the relationship between the IoT, a new IT technology, and the SCM. To study the effect of IoT technology on SCM, this study conducted professional Delphi surveys for three times. Through this method, this study analyzed changes that will be caused by the IoT technology, the priority area in IoT introduction, and the expected difficulty in IoT introduction on SCM. As a result of the Delphi surveys and analyses, it was expected that when IoT technology is introduced, the level of SCM's IT use and partnership will increase. However, the effect of the increased performance of the supply chain, which includes inventory management and quality control, will become weaker. The reason is that the development of operation and management skills, as well as the improvement of IT technology, are also important elements for the performance improvement of the supply chain. As for the priority area in IoT introduction, it was expected that the effect will be greater when IoT is introduced in customer service, transportation, and delivery areas. As difficulties in IoT technology introduction, such as the shortage of IoT platform development personnel, standardization, integration with the existing system, securing professional manpower, expenses, data management, and operation, were derived, it has thus become necessary for us to exert greater efforts in order to come up with solutions.

• Journal of KIISE:Computer Systems and Theory
• /
• v.30 no.12
• /
• pp.699-707
• /
• 2003

RBAC is accepted as a more advanced control method than existing DAC and MAC. Studies on the permission-role part of RBAC model are relatively insufficient compared with those on the user-role part, and researches on symmetric RBAC models to overcome this is also in an incipient stage. Therefore there is much difficulty in assigning permissions suitable for roles. This paper proposes an symmetric RBAC model that supplements the constraints on permission assignment set forth by previous studies. The proposed symmetric RBAC model reflects the conflicts of interests between roles and the sharing and integration of permissions on the assignment of permissions by presenting the constraints on permission assignment that take the separation of duties and role hierarchies into consideration. In addition, by expressing constraints prescribing prerequisite relations between dynamic permissions through AND/OR graphs, it is possible to effectively limit the complicated prerequisite relations of permissions. The constraints on permission assignment for the proposed symmetric RBAC model reduce errors in permission assignment by properly detailing rules to observe at the time of permission assignment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.12
• /
• pp.1824-1833
• /
• 2016

In this paper, we propose networked airborne relay-based positioning scheme (N-ARPS) based on time division multiple access (TDMA) networks to improve the performance of relative navigation (RelNav). To integrate the ARPS into TDMA, there are three problems such as slot allocation, selection of airborne relays, and method for signal loss to be solved. A subframe of N-ARPS is designed to assign the slots for broadcast and relay of navigation signals consecutively to minimize the effect of mobility. The selection algorithm determines the optimum set of airborne relays by selecting evenly distributed nodes depending on their distances to the master station. Finally, we uses precise position location information (PPLI) messages, which are received in data transmission period, to estimate a user position when the navigation signals are missing. The simulation results indicate that N-ARPS significantly improves user accuracy over RelNav.