• Journal of the Korean Ceramic Society
• /
• v.45 no.7
• /
• pp.411-417
• /
• 2008

Aerosol Deposition Method (ADM) is a novel technique to grow ceramic thick films with high density and nano-crystal structure at room temperature. $^{1,2)}$ For these unique advantages of ADM, it would be applied to the fabrication process of 3-D integration ceramic modules effectively. However, it is critical to control the properties of starting powders, because a film formation through ADM is achieved by impaction and consolidation of starting powders on the substrates. We fabricated alumina thick films by ADM for the application to integral substrates for RF modules. When the as-received alumina powders were used as a starting material without any treatments, it was observed that the dielectric properties of as-deposited alumina films, such as relative permittivity and loss tangent, showed high dependency on the frequency. In this study, some techniques of powder pre-treatments to improve the dielectric properties of alumina thick films will be shown and the effects of starting powders on the properties of AD films will be discussed.

• Smart Structures and Systems
• /
• v.26 no.5
• /
• pp.559-573
• /
• 2020

One of the powerful data management tools is Building Information Modeling (BIM) which operates through obtaining, recalling, sharing, sorting and sorting data and supplying a digital environment of them. Employing SHM, a BIM in monitoring systems, would be an efficient method to address their data management problems and consequently optimize the economic aspects of buildings. The recording of SHM data is an effective way for engineers, facility managers and owners which make the BIM dynamic through the provision of updated information regarding the occurring state and health of different sections of the building. On the other hand, digital transformation is a continuous challenge in construction. In a cloud-based BIM platform, environmental and localization data are integrated which shape the Internet-of-Things (IoT) method. In order to improve work productivity, living comfort, and entertainment, the IoT has been growingly utilized in several products (such as wearables, smart homes). However, investigations confronting the integration of these two technologies (BIM and IoT) remain inadequate and solely focus upon the automatic transmission of sensor information to BIM models. Therefore, in this composition, the use of BIM based on SHM and IOT is reviewed and the economic application is considered.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.6
• /
• pp.40-45
• /
• 2001

In this paper, we implemented a multimodal system combining speech and lip information, and evaluated its performance. We designed speech recognizer using speech information and lip recognizer using image information. Both recognizers were based on HMM recognition engine. As a combining method we adopted the late integration method in which weighting ratio for speech and lip is 8:2. By the way, Our constructed multi-modal recognition system was ported on DARC system. That is, our system was used to control Comdio of DARC. The interrace between DARC and our system was done with TCP/IP socked. The experimental results of controlling Comdio showed that lip recognition can be used for an auxiliary means of speech recognizer by improving the rate of the recognition. Also, we expect that multi-model system will be successfully applied to o traffic information system and CNS (Car Navigation System).

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.6
• /
• pp.1269-1276
• /
• 2005

In this paper, Mixer using the direct-conversion method intended to use in front-end of a RF receiver is designed. The direct conversion Mixer is an alternative wireless receiver architecture to the well-established superheterodyne, particularly for high integration, low power, and low cost. It operates at 2.4GHz band, and is designed and simulated with a 0.35um CMOS technology and HSPICE simulator. Layout is implemented with a Mentor IC Station. The 2.4GHz CMOS Mixer employs a modified single-balanced Gilbert Cell with additional MOSFET in the output stages to improve IIP2, which is a standard of linearity in direct conversion receiver. Additional coversion-stages's transconductances are controlled by each MOSFET's physical properties. The HSPICE simulation results show that the 2.4GHz CMOS Mixer has voltage gam of 29dB, IIP2 of 63dBm, respectively. The Mixer also draws 3.5mA from a 3.3V supply.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.1C
• /
• pp.48-58
• /
• 2002

As internet traffic increases, the problem that it should be efficiently accepted in to the existing voice network in the pending problem importantly to the existing communication corporations. The feature of next generation exchange network is made up of the form of integration network that connect data traffic(internet service. Etc) with the existing voice network and it can be showed with very diverse aspects according to the constitution time of network or the characteristics of business. The progress strategy that develop the existing circuit based communication network into packet-based communication network can be divided into two in a large scale according to the application position These are VoDSL application method(Technology that packetize access network) and softswitch technology application method(after packetizing relay network, packetizing that into the access network). In this paper, we will deduce the desirable technology that can construct packet-based next generation exchange networks in the structure of the existing communication network environment. We will perform the research on a device to offer the necessary core technique VoSDL service with realistic resolutions primarily.

• Korean Institute of Interior Design Journal
• /
• v.19 no.3
• /
• pp.205-213
• /
• 2010

The importance of communication which is oriented to interaction, fusion and connection is more increased in the post-information society. The information environment is already realized as interface to reach immediately and freely to the databased information and knowledge. The contemporary libraries execute very important roles as an intellectual infra of modern times to deliver the great human achievement and create new culture. In the mean time, the rapid information-oriented society and the development of digital technology bring out big change in the traditional dispatch and receipt method of information. For this reason, libraries as the community space of visitors integrates physical space - electronic space and reconstructs new temporary culture and value to build the new interface that connects human to human, human to space and human to information. On the premise of these awareness, this study analysis the creative interface factor of Tama Art University New Libraries in Ito Toyo in order to research the function and the application method of modern libraries. And the results are follows. 1)We can make sure the significance of communication and the integration consciousness between digital technology and analogue sensitivity that is the characteristic of the post-information society. 2)We can classify for the creative interface factors by the character as space factor(Arcade, Gallery, Lounge, AV Booth, Cafe), facility/equipment factor(Laboratory, Media, Bar, Info Shelf, Media Seat) and furniture factor(Carrel, Desk, Mag Table, XI Shelf). 3)We can see that these interface factors change the stream of library users and that the library is constructed for library users to create and discovery something easily from books and modern technologies. And we can realize also that these factors are creative installation to lead out naturally the latent liberty sense of users.

• Journal of Information Technology Services
• /
• v.3 no.1
• /
• pp.79-88
• /
• 2004

Practical use of Information Technology in present enterprise simply enterprise support do pass over known dimension and is utilizing by means for enterprise competitive power strengthening. Because of these point, a lot of kind of information systems appeared. It can be said that EIP system that many enterprises are introducing recently is concept that appear to also use information in enterprise more efficiently. If present EIP system sees construct example, segment is detected to improve some. First, should do duplicate development despite it is same function to use EIP system in wireless and web browser environment. Second, can hear management's difficulty by immense contents that happen in System Integration. We wish to solve problem that happen in development of existing EIP system using XUL and a SVG technology in this paper that aim to these. XUL is open source In language to manufacture UI that do not receive court of platform and existence and nonexistence captain rain, support wireless and web browser equipment at the same time to source that is produced once if is browser that can manufacture usable interface in web and supports XUL as user wants. SVG method is a skill that can offer convenience that is epoch-making in contents management by software that describe contents representation in source code unlike form that show because calls contents forming already in the existent bit map room and establishes to browser handles this and expresses contents. In paper, produced use of XUL and SVG by prototype to presented whether can apply XUL and a SVG technology to actuality EIP system and verifies whether this is possible and that do actuality through existent method and comparison and excellency were seen.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.10
• /
• pp.10-20
• /
• 2003

In this study, the effective properties were numerically calculated for laminated plain weave textile composites with arbitrary s tacking orientation angles. A single-field macroelement with modified sub-domain integration was used in the analysis to reduce computer resource requirement while efficiently accounting for the internal microstructure. A sample calculation procedure based on the Monte Carlo method was employed to consider the random shift between the layers. Results showed that a significant deviation occurred when the orientation angles were near 0 deg for extensional modulus and Poisson's ratio and 45 deg for the shear modulus. It was also found that the average properties calculated by the 2-layer numerical specimen had large differences compared to the CLT results, which indicated that a caution must be needed when designig of thin plain weave composite structures.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.5
• /
• pp.1-9
• /
• 2003

Detailed flow of a shrouded tail rotor in hover is studied by using a compressible inviscid flow solver on unstructured meshes. The numerical method is based on a cell-centered finite-volume discretization and an implicit Gauss-Seidel time integration. Numerical simulation is made for a single blade attached to the center body and guide by the duct by imposing a periodic boundary condition between adjacent rotor blades. The results show that the performance of an isolated rotor without shroud compares well with experiment. In case of a shrouded rotor, correction of the collective pitch angle is made such that the overall performance matches with experiment to account for the uncertainties of the experimental model configuration. Details of the flow field compare well with the experiment confirming the validity of the present method.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.29 no.3
• /
• pp.214-219
• /
• 1993

Counter balance valve is used as one part of hydraulic motor brake system. The function of this valve is to protect over-run or free falling of inertia load. But occasionally the brake system with counter balance valve makes some undesirable problems such as pressure surges or vibrations. These problems may hurt system safety and driver's conformability. Nevertheless, studies on dynamic characteristics of hydraulic system including counter balance valve are very rare, so further accumulation of research results are required. In this study, for the purpose of easy estimation about dynamic characteristics of hydraulic system including counter balance valve, precise formulation describing fluid dynamics and valve dynamics under various boundary conditions were made. The equations obtained in the preceding process include some parameters that must be got experimentally. Flow coefficients of valve and choke are the most significant ones among the parameters. So these parameters are obtained experimentally in this study, and experimental equations obtained from the experimental data were used for numerical calculation. The equations were analysed by numerical integration using Runge-Kutta method, because the equations contain various nonlinear terms. From the numerical analysis, it was verified that the dynamic response of counter balance valve and pressure variation at each elements can be estimated very easily. So the analysing method developed in this study enabled very easy estimating the relation between the performances of counter balance valve and various physical parameters related to the valve. Conclusively, it is said that the results obtained in this study can be used very usefully to develop a new type counter balance valve or to apply the valve to actual hydraulic system for various industrial equipments.