• Journal of Biomedical Engineering Research
• /
• v.31 no.4
• /
• pp.292-301
• /
• 2010

To restore visual sensation of blind patients, we have proposed a fully implantable retinal prosthesis comprising an three dimensionally (3D) stacked retinal chip for transforming optical signal to electrical signal, a flexible cable with stimulus electrode array for stimulating retina cells, and coupling coils for power transmission. The 3D stacked retinal chip is consisted of several LSI chips such as photodetector, signal processing circuit, and stimulus current generator. They are vertically stacked and electrically connected using 3D integration technology. Our retinal prosthesis has a small size and lightweight with high resolution, therefore it could increase the patients` quality of life (QOL). For realizing the fully implantable retinal prosthesis, we developed a retinal prosthesis module comprising a retinal prosthesis chip and a flexible cable with stimulus electrode array for generating optimal stimulus current. In this study, we used a 2D retinal chip as a prototype retinal prosthesis chip. We fabricated the polymide-based flexible cable of $20{\mu}m$ thickness where 16 channels Pt stimulus electrode array was formed in the cable. Pt electrode has an impedance of $9.9k{\Omega}$ at 400Hz frequency. The retinal prosthesis chip was mounted on the flexible cable by an epoxy and electrically connected by Au wire. The retinal prosthesis chip was cappted by a silicone to pretect from corrosive environments in an eyeball. Then, the fabricated retinal prosthesis module was implanted into an eyeball of a rabbit. We successfully recorded electrically evoked potential (EEP) elicited from the rabbit brain by the current stimulation supplied from the implanted retinal prosthesis module. EEP amplitude was increased linearly with illumination intensity and irradiation time of incident light. The retinal prosthesis chip was well functioned after implanting into the eyeball of the rabbit.

• Journal of Korean Home Economics Education Association
• /
• v.12 no.3
• /
• pp.19-38
• /
• 2000

This study is about open and secondary level Home Economics Education which is applicable to field and which includes the characteristics, purpose and problems of each open education, secondary education and home economics education. Based on the ideology of open education this study will identify the meaning of openness in terms of Home Economics Education reconstructing meaning purpose, characteristics, curriculum paradigm and curriculum. The instructional model and module which use web, will be presented as the results o the reconstruction works. The open instructional module in Home Economics Education which will be operated on the web is consisted of 1) setting the orientation of curriculum development 2) instructional model development 3) rebuilding the Home Economics Education curriculum 4)development of instructional modules and web-based materials and 5)construction of the web-site. Six instructional module begin with critical/emancipatory curriculum paradigm in open Home Economics Education use module as a unit of class management instead of 1 class, facilitates nest-type integration which is applied from open education keeping the nature of Home Economics Education and focus on practical problem and problem solving through reconceptualization with dialectical perspective on individual, family and society. The practical problem solving model has four steps: Identifying practical problems. Understanding the contexts of problem, Searching for solutions and examining its consequences, Action and evaluation. The web-site has to be developed based on the six instructional module includes those issues : self-identification for reinforcing autonomy and self-esteem, living with family living with friends, autonomous living healthy living and understanding sexuality.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.5
• /
• pp.63-70
• /
• 2020

In this paper, the transmit-receive module for military seekers has been designed and fabricated in 35 GHz. To increase the performance of substrates and high integration of circuits in millimeter-wave band, a 4-layer LCP(Liquid Crystal Polymer) substrate was developed. This substrate was implemented with three FCCL substrates and two adhesive layers, and a process using the difference in melting point between the substrates was used for lamination. Using a strip line and a microstrip line was confirmed by the transmission loss along the length of the substrate, and the performance of LCP substrates was validated with a power divider in 35 GHz. After confirming the performance of individual blocks such as power amplifier and low noise amplifier, a single channel Ka-band transmission/reception module was developed using a 4-layer liquid crystal polymer substrate. The transmit power of this module has above 1.1W in pulse duty 10% and has an output power of 1.1W and it has receive noise figure less than 8.5 dB and receive gain more than 17.6 dB.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.11
• /
• pp.1088-1093
• /
• 2014

The structure of the fire control system(FCS) of a light armed helicopter and effective logistics support was taken into account in the proposed common weapon interface module(CWIM) for a distributed FCS. The pros and cons of a distributed FCS and a centralized FCS were analyzed, then a CWIM which can be applied to the weapon interface module of a distributed FCS was designed and fabricated. Integration tests between the proposed CWIM and a weapon simulator were conducted to ascertain whether or not the proposed CWIM could be applicable to a distributed FCS. We expect that the CWIM design approach method secured through this study will be helpful in mitigating cable work of the FCS which will be applied to a Light Armed Helicopter and controlling various weapons.

• Journal of Korean Institute of Industrial Engineers
• /
• v.21 no.3
• /
• pp.429-439
• /
• 1995

The Interior point method in linear programming is classified into two categories the affine-scaling method and the logarithmic barrier method. In this paper, we integrate those methods and implement them in one shared module. First, we analyze the procedures of two interior point methods and then find a unified formula in finding directions to improve the current solution and conditions to terminate the procedure. Second, we build the shared modules which can be used in each interior point method. Then these modules are experimented in NETLIB problems.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.3
• /
• pp.49-59
• /
• 2001

Wireless communication systems will be one of the biggest drivers of semiconductor products over the next decade. Global Positioning System (GPS) and Blue-tooth, HomeRF, and Wireless-LNA system are just a few of RF-module candidate awaiting integration into next generation mobile phone. Motivated by the growing needs for lowcost and multi-band/multi-function single chip wireless transceivers, CMOS technology has been recognized as a most promising candidate for the implementation of the future wireless communication systems. This paper presents recent developments in RF CMOS technology so far, much of them have been developed in ETRI, and from them forecasts technology trends in the near future.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2001.11a
• /
• pp.221-225
• /
• 2001

최근 무선 인터넷 및 다양한 콘텐츠들을 지원할 수 있는 PDA 장비들이 개발되고 있으며, 향후 무선통신분야에서 많은 연구 개발이 필요하다. 또한 PDA 기반의 지리정보시스템에 대한 개발 제품들은 많이 있지만, 아직 개선되어야 할 기능들이 많이 있다. 이러한 관점에서 본 연구는 PDA 환경에 적합한 경량화된 제이미 수치지도 포맷을 새롭게 제안하고, 이를 Win/CE기반에 디스플레이할 수 있는 GIS 라이브러리를 구현하였다. 현재는 GPS 장비와 개발된 GIS 도구들을 통합하여 PDA 환경에서 지도출력이 가능하며, 속도와 다양한 기능들에 대한 추가 개발을 진행하고 있다.

• Korean Journal of Computational Design and Engineering
• /
• v.5 no.3
• /
• pp.215-223
• /
• 2000

The product data exchange between heterogeneous CAB and PDM systems is a crucial issue for the integration of product development systems. STEP offers an efficient mechanism of product data exchange between heterogeneous systems. This paper introduces a UML-based mapping methodology for the product data models. The suggested mapping method has been applied to exchange the product structure data between CAD and PDM systems. Based on the STEP methods, we developed an interface module between a CAD system and a PDM system.

• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.34-39
• /
• 1998

This paper describes the simulation approaches employed for a vector control system of induction motor drive using SIMNON for windows program. SIMNON program tool can solve differential and difference equations for nonlinear dynamical control system. One powerful feature is its ability of allowing integration of individual program modules after each individual module is programed and tested independently. This particular feature is exploited here for an SVPWM inverter drive by real-time modeling and simulation. The suggested programs are provided a simple and complete simulation for induction motor vector drive system.

• 유체기계공업학회:학술대회논문집
• /
• 2004.12a
• /
• pp.711-714
• /
• 2004

A project to develop internet based collaborative engineering environments using agent technology is started to develop an agent based soft system for design and performance analysis of centrifugal pumps. This paper introduces the feasible technology needed to construct a pump design system based on software agent.