• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2008년도 Asian Magnetics Conference
• /
• pp.269.2-269.2
• /
• 2008

• 한국전자파학회논문지
• /
• 제19권11호
• /
• pp.1287-1293
• /
• 2008

4중 대역의 안테나 스위치 모듈을 개발하였다. 단말기의 front-end 단에서 LTCC 형태의 저역 통과 필터, 다이오드 및 수동 부품들로 구현되는 스위치 부분을 대신하여 수동 집적 회로와 트랜지스터 스위치로 집적화한 것이다. 필터의 수동 소자 및 정합 회로를 통합 구성하여 크기 면에서도 소형화가 가능하고, 가격 경쟁력에서도 우위를 점할 수 있다. 제안하는 안테나 스위치 모듈의 크기는 $5{\times}5\;mm$이고, 두께는 0.8 mm로 제작되었다. 각 대역의 삽입 손실은 평균적으로 1.0 dB이며, 반사 손실은 GSM/EGSM 대역에서 15.1 dB, DCS/PCS 대역에서 19 dB이다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.632-635
• /
• 2007

We have synthesized 4'-nitrobiphenyl-4-carboxylic acid (NBCA) and fabricated the hole-only device consisting of ITO/NBCA SAM/TPD (1500 ${\AA}$)/Al (500 ${\AA}$) and the organic light emitting diodes (OLEDs) consisting of ITO/NBCA SAM/TPD (600 ${\AA}$)/Alq3 (600 ${\AA}$)/Al (600 ${\AA}$). The prepared hole-only device with NBCA exhibited lower driving voltage than the device with 4-nitrobenzoic acid (NBA). OLEDs using NBCA also show high external quantum efficiency.

• 마이크로전자및패키징학회지
• /
• 제20권3호
• /
• pp.19-22
• /
• 2013

고속, 대용량 정보 전송 수요가 급격하게 증가함에 따라 대량생산 및 고효율의 PLC형 집적 광소자의 연구가 증가하고 있다. 본 논문에서는 광소자와 광섬유가 수동 정렬이 가능하도록 일체형 정렬 구조를 제안하였다. 일체형 구조의 광소자는 기본적으로 1채널의 입력부의 광신호를 2채널의 출력부를 통해 분리하는 광분배기 구조이다. 본 연구에서 제안된 일체형 구조의 제작은 롤투롤 공정 기술을 이용하여 제작하고 그 특성을 평가하였다. 롤투롤 공정 기술은 광소자의 제작에 들어가는 시간을 절감하고 연속생산이 가능한 방법이다. 제작된 광소자의 광특성은 1550 nm의 광원을 이용하여 약3.9 dB의 삽입손실과 0.2 dB의 채널 균일도를 나타내었다.

• 한국멀티미디어학회논문지
• /
• 제20권5호
• /
• pp.791-799
• /
• 2017

With the development of the internet of things, sensor and device are can be applied to various scenario. Overall improving of the dependability index of internet of things is the ultimate goal. And reliability aims to increase the success rate of internet of things service delivery. Many studies about internet of things system have been made on the system to assess a dependability for providing reliable service to user, but it has difficult to reflect the user context for evaluating the device reliability. Also, most do not consider the availability of content information. In this paper, it proposed dependable device searching system in the internet of things environment. This system evaluates device dependability based on device status and measured data. Through the proposed system, it can be provided reliable context information for user-centric service.

• Journal of Positioning, Navigation, and Timing
• /
• 제4권3호
• /
• pp.141-150
• /
• 2015

In this study, a Global Navigation Satellite System (GNSS) / Inertial Navigation System (INS) / odometer / barometer integrated navigation system that uses a commercial navigation device including Micro Electro Mechanical Systems (MEMS) accelerometer and gyroscope in addition to GNSS, odometer information obtained from a vehicle, and a separate MEMS barometer sensor was implemented, and the performance was verified. In the case of GNSS and GNSS/INS integrated navigation system that are generally used in a navigation device, the performance would deteriorate in areas where GNSS signals are not available. Therefore, an integrated navigation system that calculates a better navigation solution in areas where GNSS signals are not available compared to general GNSS/INS by correcting the velocity error of GNSS/INS using an odometer and by correcting the cumulative altitude error of GNSS/INS using a barometer was suggested. To verify the performance of the navigation system, a commercial navigation device (Softman, Hyundai Mnsoft, http://www.hyundai-mnsoft.com) and a barometer sensor (ST Company) were installed at a vehicle, and an actual driving test was performed. To examine the performance of the algorithm, the navigation solutions of general GNSS/INS and the GNSS/INS/odometer/barometer integrated navigation system were compared in an area where GNSS signals are not available. As a result, a navigation solution that has a smaller position error than that of GNSS/INS could be obtained in the area where GNSS signals are not available.

• 한국공간구조학회논문집
• /
• 제19권2호
• /
• pp.43-50
• /
• 2019

A smart connective control system was invented recently for coupling control of adjacent buildings. Previous studies on this topic focused on development of control algorithm for the smart connective control system and design method of control device. Usually, a smart control devices are applied to building structures after structural design. However, because structural characteristics of building structure with control devices changes, a iterative design is required for optimal design. To defeat this problem, an integrated optimal design method for a smart connective control system and connected buildings was proposed. For this purpose, an artificial seismic load was generated for control performance evaluation of the smart coupling control system. 20-story and 12-story adjacent buildings were used as example structures and an MR (magnetorheological) damper was used as a smart control device to connect adjacent two buildings. NSGA-II was used for multi-objective integrated optimization of structure-smart control device. Numerical simulation results show the integrated optimal design method proposed in this study can provide various optimal designs for smart connective control system and connected buildings presenting good control performance.

• Journal of Information Processing Systems
• /
• 제14권4호
• /
• pp.1033-1048
• /
• 2018

This paper proposes an integrated lighting enabler system (ILES) based on standard machine-to-machine (M2M) platforms. This system provides common services of end-to-and M2M communication for smart lighting system. It is divided into two sub-systems, namely end-device system and server system. On the server side, the M2M platform OpenMTC is used to receive data from the sensors and send response for activating actuators. At the end-device system, a programmable smart lighting device is connected to the actuators and sensors for communicating their data to the server. Some experiments have been done to prove the system concept. The experiment results show that the proposed integrated lighting enabler system is effective to reduce the power consumption by 25.22% (in average). The proving of significance effect in reducing power consumption is measured by the Wilcoxon method.

• Current Optics and Photonics
• /
• 제7권6호
• /
• pp.761-765
• /
• 2023

We analyzed the absorption spectra of acetone in the 3.37 ㎛ mid-infrared range using the off-axis integrated cavity output spectroscopy technique to develop a real-time, in-line breath analysis device. The linear relationship between acetone concentration and absorption increase was confirmed as 0.32%/ppm, indicating that the developed device allows for a quantitative analysis of acetone concentration in exhaled breath. To further confirm the feasibility of using our device for breath analysis, we measured the acetone concentration of human breath samples at the sub-ppm level.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.2753-2758
• /
• 2003

Tactile sensation is essential for many manipulation and exploration tasks not only in a real environment but also in a virtual environment. In this paper, we discuss a conceptual design of an integrated tactile display system. The system comprises two parts: a 2 DOF force feedback device for kinesthetic display and a tactile feedback device for displaying the normal stimulation to skin and the skin slip/stretch. Psychophysical experiments measure the effects of fingerpad selection, the direction of finger movements and the texture width on tactile sensitivity. We also investigate characteristics of lateral finger movement while subjects perceive different textures. From the experimental results, the principal parameters for designing a tactile display are suggested. A tactile display device is implemented using eight piezoelectric bimorphs and a linear actuator, and is attached to a 2 DOF translational force feedback device to simultaneously simulate texture and stiffness of the object.