• Ocean and Polar Research
• /
• 제26권3호
• /
• pp.453-463
• /
• 2004

The Antarctic Peninsula is important in terms of global warming research due to pronounced increase of air temperature over the last century. The first eddy covariance system was established at King Sejong Station located in the northern region of the Antarctic Peninsula in December of 2002 and has been operated over one year. Here, we analyze turbulent characteristics to determine quality control criteria for turbulent sensible heat flux data as well as to diagnose the possibility of long term eddy covariance measurement under extreme weather conditions of the Antarctic Peninsula. We also report the preliminary result on sensible heat flux. Based on the analyses on turbulent characteristics such as integral turbulence characteristics of vertical velocity (w) and heat (T), stationarity test and investigation of correlation coefficient, they fallow the Monin-Obukhov similarity and eddy covariance flux data were reliable. ${\sim}47%$ of total retrieved sensible heat flux data could be used for further analysis. Daytime averaged sensible heat flux showed a pronounced seasonal variation, with a maximum of up to $300Wm^{-2}$ in summer. In conclusion, continuous and long-term eddy covariance measurement may be possible at the study site and the land surface may influence the atmosphere significantly through heat transport in summer.

• 센서학회지
• /
• 제29권1호
• /
• pp.7-13
• /
• 2020

Dielectric capacitors are integral components in electronic devices that protect the electric circuit by providing modulated steady voltage. Explosive growth of the electric automobile market has resulted in an increasing demand for dielectric capacitors that can operate at temperatures as high as 400 ℃. To surpass the operation temperature limit of currently available commercial capacitors that operate in temperatures up to 125 ℃, Bi_1/2Na_1/2TiO₃ (BNT), which has a large temperature-insensitive dielectric response with a maximum dielectric permittivity temperature of 300 ℃, was selected. By introducing an intentional A-site cation deficiency and post-heat treatment, we successfully manage to control the dielectric properties of BNT to use it for high-temperature applications. The key feature of this new BNT is remarkable reduction in dielectric loss (0.36 to 0.018) at high temperature (300 ℃). Structural, dielectric, and electrical properties of this newly developed BNT were systematically investigated to understand the underlying mechanism.

• 한국운동역학회지
• /
• 제21권1호
• /
• pp.25-29
• /
• 2011

The purpose of this study was to analyze quantitative and qualitative differences according to shoe type for the grand jete landing in ballet. The subjects for this study were 9 female ballet majors with an average of 12 years of experience. Subjects jumped, performing a front split, and landed on 1 foot, a movement called the grand jete. Analysis was performed on the students' landing. Independent variables were 3 shoe types: split sole, traditional out sole, and 5-toed forefoot shoes, with bare feet as a control group. Dependent variables were vertical passive ground reaction force and qualitative elements. Passive ground reaction force variables(maximum passive peak value, number of passive peaks, passive force-time integral, and center of pressure) were measured by the Kistler 9281B Force Platform. Qualitative elements were comfort, cushioning, pain, and fit. Statistical analysis included both 1-way ANOVA and Tukey's test for follow-up. Finalized data demonstrated that the 5-toed forefoot shoe allows the forefoot to expand and the toes to individually press down upon landing, increasing foot contact with the surface. Five-toed forefoot shoes minimize passive peaks and pain, while increasing comfort, cushioning, and fit. Most ballet movements are composed of jumping, balancing, landing, and spinning. Wearing 5-toed forefoot shoes allows for a natural range of movement in each toe, to improve both technique and balance. Pain and injuries from ballet can be minimized by wearing the correct shoe type. According to this analysis, it is possible to customized ballet shoes to increase the efficiency of techniques and movements.

• 한국세라믹학회지
• /
• 제45권7호
• /
• pp.411-417
• /
• 2008

Aerosol Deposition Method (ADM) is a novel technique to grow ceramic thick films with high density and nano-crystal structure at room temperature. $^{1,2)}$ For these unique advantages of ADM, it would be applied to the fabrication process of 3-D integration ceramic modules effectively. However, it is critical to control the properties of starting powders, because a film formation through ADM is achieved by impaction and consolidation of starting powders on the substrates. We fabricated alumina thick films by ADM for the application to integral substrates for RF modules. When the as-received alumina powders were used as a starting material without any treatments, it was observed that the dielectric properties of as-deposited alumina films, such as relative permittivity and loss tangent, showed high dependency on the frequency. In this study, some techniques of powder pre-treatments to improve the dielectric properties of alumina thick films will be shown and the effects of starting powders on the properties of AD films will be discussed.

• 전자공학회논문지SC
• /
• 제38권2호
• /
• pp.1-11
• /
• 2001

본 논문에서는 정현파형 브러시리스 직류 전동기의 속도제어를 위해 두 개의 스위칭 라인에 의해 구성된 채터링 둔감영역을 갖는 가변구조 속도제어기를 설계한다. 슬라이딩 모드 과정중 과도상태에서 발생하는 고주파 채터링을 저주파로 한정시키기 위해 데드 존(Dead Zone) 함수의 도입을 제안하고, 정상상태에서의 채터링 감소 및 정상상태 오차를 제거하기 위해서는 제어입력에 지변이득을 적용한다. 제안된 데드 존 함수는 두 개의 스위칭 함수로 구성된 슬라이딩 영역을 표시하며 이 영역에 시스템의 상태가 존재 시 제어구조를 비례-적분 제어기로 변경하여 채터링이 발생하지 않으며 이 영역의 이탈 시만 가변구조제어를 적용하므로 채터링이 발생하게되어 과도상태의 고주파 채터링을 저주파로 감소시킬 수 있다. 설계된 속도 제어기에 대해 컴퓨터 시뮬레이션과 실험을 통하여 그 성능을 보인다.

• 한국HCI학회논문지
• /
• 제5권2호
• /
• pp.1-6
• /
• 2010

본 연구에서는 장애인이나 게이머를 위해 눈의 움직임과 머리의 움직임으로 제어가 가능한 헤드 마우스를 제안하였고, 제안한 마우스를 기존의 마우스와 비교하였다. 마우스 포인터의 이동은 머리 움직임의 회전각도 정보를 활용하였고, 클릭이나 더블 클릭의 이벤트는 눈의 깜빡임을 이용하였다. 기존의 각속도계를 이용한 마우스에서 적분으로 인한 누적오차는 적분을 하지 않고 데드 존을 갖는 비선형 상대 좌표계 방식을 통하여 해결하였고, 추가적으로 이동 거리와 가속도를 함께 고려하여 직관적인 마우스 포인터 제어가 가능하도록 하였다. 주변광의 영향을 최소화하도록 광원 제어 회로를 설계하여 외부 광원의 변화에도 마우스 이벤트 검출에 영향을 받지 않도록 하였다. 제안한 마우스를 응시점을 이용한 마우스(퀵글랜스)와 비교한 결과, 20회 클릭하는 실험에서는 약 21%, Dasher를 이용한 문자입력실험에서도 약 25%, 화상키보드를 이용한 문자입력 실험에서도 약 37% 짧은 입력 시간을 보였다. 그리고 카메라 마우스와의 비교에서도 제안한 헤드 마우스가 우수한 성능을 보였다.

• 한국정보전자통신기술학회논문지
• /
• 제11권4호
• /
• pp.388-393
• /
• 2018

본 논문은 고효율 리플렉터 일체형 50W급 AC 직결형 엔진을 개발하여 SMPS 사용하지 않고 제품의 소형화 및 경량화를 구현하여 소비자가 편리하게 사용하고, AC Driver의 취약한 부분을 보완하기 위해 다단 바리스터 회로를 설계하여 전자 부품 수량 감소를 통한 원가절감 전해 콘덴서를 사용하지 않는 회로 구성으로 고신뢰성을 구현 하여 LED수명을 증대시켰다. 또한 AC 직결형 구동장치를 IC 반도체로 제작하여 리플렉터 일체형으로 AC 직결형 구동장치를 적용 하여 제작 그 수명을 LED의 온전한 수명을 모두 사용할 수 있는 장치와 발광 다이오드 조명 장치의 제어 회로에 하나 이상의 발광다이오드를 포함하는 여러 개의 발광 다이오드 채널이 직렬로 구성되는 광원을 정류 전압으로 구동하는 발광 다이오드 조명 장치의 제어회로를 제안하였다.

• Asian Pacific Journal of Cancer Prevention
• /
• 제16권10호
• /
• pp.4435-4438
• /
• 2015

p21 is a cyclin-dependent kinase inhibitor, which can arrest cell proliferation and serve as a tumor suppressor. Though many studies were published to assess the relationship between p21 rs1059234 polymorphism and various cancer risks, there was no definite conclusion on this association. To derive a more precise quantitative assessment of the relationship, a large scale meta-analysis of 5,963 cases and 8,405 controls from 16 eligible published case-control studies was performed. Our analysis suggested that rs1059234 was not associated with the integral cancer risk for both dominant model [(T/T+C/T) vs C/C, OR=1.00, 95% CI: 0.84-1.18] and recessive model [T/T vs (C/C+C/T), OR=1.03, 95% CI: 0.93-1.15)]. However, further stratified analysis showed rs1059234 was greatly associated with the risk of squamous cell carcinoma of head and neck (SCCHN). Thus, larger scale primary studies are still required to further evaluate the interaction of p21 rs1059234 polymorphism and cancer risk in specific cancer subtypes.

• 대한치과교정학회지
• /
• 제45권2호
• /
• pp.59-65
• /
• 2015

Objective: To investigate skeletal and dental changes after application of a mandibular setback surgery-first orthodontic treatment approach in cases of skeletal Class III malocclusion. Methods: A retrospective study of 34 patients (23 men, 11 women; mean age, $26.2{\pm}6.6years$) with skeletal Class III deformities, who underwent surgery-first orthodontic treatment, was conducted. Skeletal landmarks in the maxilla and mandible at three time points, pre-treatment (T0), immediate-postoperative (T1), and post-treatment (T2), were analyzed using cone-beam computed tomography (CBCT)-generated half-cephalograms. Results: The significant T0 to T1 mandibular changes occurred $-9.24{\pm}3.97mm$ horizontally. From T1 to T2, the mandible tended to move forward $1.22{\pm}2.02mm$, while the condylar position (Cd to Po-perpendicular plane) shifted backward, and the coronoid process (Cp to FH plane) moved vertically. Between T1 and T2, the vertical dimension changed significantly (p < 0.05). Changes in the vertical dimension were significantly correlated to T1 to T2 changes in the Cd to Po-perpendicular plane (r = -0.671, p = 0.034), and in the Cp to FH plane (r = 0.733, p = 0.016), as well as to T0 to T1 changes in the Cp to Po-perpendicular plane (r = 0.758, p = 0.011). Conclusions: Greater alterations in the vertical dimension caused larger post-treatment (T2) stage skeletal changes. Studying the mandibular position in relation to the post-surgical vertical dimension emphasized the integral importance of vertical dimension control and proximal segment management to the success of surgery-first orthodontic treatment.

• 복식
• /
• 제59권7호
• /
• pp.127-139
• /
• 2009

The purpose of this study is to research the change of Tibet's commercial district following Tibet's globalization(traditional clothing to modern clothing). Tibet's traditional culture is fastly changing for two major reasons: Chinese government's persistent assimilation policy on minority ethnic groups and globalization, a powerful trend worldwide. Therefore this investigation was conducted on the most preeminent feature of life, clothing culture, at capital city Lhasa where modernization is most prominent and fast in Tibet. For this, the first field investigation was conducted between February 5th and 15th, 2007. and the second investgation was between January 16th and 25th, 2008. As a result, the study on clothing globalization in Lhasa, Tibet, reaches the conclusion as follows: Based on such developments, commerce of Lhasa has been modernized, bringing about great change in composition and formation of its commercial district. Stores have been modernized and their service quality has improved. While the number of traditional clothes shops has decreased, various types of modern clothes shops have emerged. Modern clothes stores mostly consist of quality men's wear shops, casual clothing shops targeting those in their 20s, and sportswear shops reflecting global trend. This composition indicates that it is men and younger generation who first adopt new culture emerged through globalization. Tibet's modernization and social development have become an integral part of globalization and public sentiment. Therefore, its modernization will be driven by power and capability of the public, rather than by policy control of the central government.