• Wind and Structures
• /
• 제17권5호
• /
• pp.553-564
• /
• 2013

By using the nonlinear aerostatic stability theory together with the method of mean wind decomposition, a method for nonlinear aerostatic stability analysis is proposed for long-span suspension bridges under yaw wind. A corresponding program is developed considering static wind load nonlinearity and structural nonlinearity. Taking a suspension bridge with three towers and double main spans as an example, the full range aerostatic instability is analyzed under wind at different attack angles and yaw angles. The results indicate that the lowest critical wind speed of aerostatic instability is gained when the initial yaw angle is greater than $0^{\circ}$, which suggests that perhaps yaw wind poses a disadvantage to the aerostatic stability of a long span suspension bridge. The results also show that the main span in upstream goes into instability first, and the reason for this phenomenon is discussed.

• 한국추진공학회지
• /
• 제25권2호
• /
• pp.66-78
• /
• 2021

본 연구에서는 환형연소기에서 연소불안정성이 발생하는 당량비 조건과 노즐 개수에 따라서 대칭성파괴(Symmetry Breaking) 효과를 비교하였다. 일반적으로 환형연소기에서는 연소실의 길이가 짧으므로 종-방향 연소불안정성이 잘 발생하지 않으나, 발전용 가스터빈시스템의 트랜지션피스(Transition piece) 같은 덕트가 존재하였을 때는 연소불안정성이 발생하였다. 이 경우 덕트로 인하여 종-방향의 불안정성 모드만 관찰되었다. 5개의 희박노즐 개수와 당량비 조건에 따라서 대칭성파괴 특성을 조사하였는데, 당량비가 감소할수록 대칭성파괴 효과가 빠르게 발생하여 불안정성이 극적으로 사라지면서 진폭이 크게 감소하였다. 또한, 희박노즐 개수가 증가할수록 당량비 감소와 같은 현상이 나타나는 것을 확인하였다.

• 한국공간구조학회논문집
• /
• 제10권1호
• /
• pp.119-126
• /
• 2010

쉘형 구조물의 동적 불안정 문제를 다룬 연구결과는 다소 발표되고 있으나 위상곡면을 이용하여 카오스 생성에 관한 기본적 현상을 다룬 연구는 거의 없는 실정이다. 동적 비선형 문제에서 여러 가지 초기조건에 의해 불안정 현상이 민감하게 발생하는 이유를 파악하기 위해서는 위상곡면에서 끌개의 특성을 조사하여 동적 불안정 생성과정을 검토하는 일은 매우 중요하다. 본 연구에서는 얕은 EP 쉘이 스텝하중을 받을 때, 직접 좌굴과 간접 좌굴의 발생 경로를 파악하기 위하여 Galerkin 법에 의해 전개된 이산화 방정식을 구한다. 이를 수치해석 기법으로 위상곡선과 연속응답스펙트럼을 구해 동적 불안정 특성을 규명한다.

• Nuclear Engineering and Technology
• /
• 제38권7호
• /
• pp.619-638
• /
• 2006

Low temperature irradiation can significantly harden metallic materials and often lead to strain localization and ductility loss in deformation. This paper provides a review on the radiation effects on the deformation of metallic materials, focusing on microscopic and macroscopic strain localization phenomena. The types of microscopic strain localization often observed in irradiated materials are dislocation channeling and deformation twinning, in which dislocation glides are evenly distributed and well confined in the narrow bands, usually a fraction of a micron wide. Dislocation channeling is a common strain localization mechanism observed virtually in all irradiated metallic materials with ductility, while deformation twinning is an alternative localization mechanism occurring only in low stacking fault energy(SFE) materials. In some high stacking fault energy materials where cross slip is easy, curved and widening channels can be formed depending on dose and stress state. Irradiation also prompts macroscopic strain localization (or plastic instability). It is shown that the plastic instability stress and true fracture stress are nearly independent of irradiation dose if there is no radiation-induced phase change or embrittlement. A newly proposed plastic Instability criterion is that the metals after irradiation show necking at yield when the yield stress exceeds the dose-independent plastic instability stress. There is no evident relationship between the microscopic and macroscopic strain localizations; which is explained by the long-range back-stress hardening. It is proposed that the microscopic strain localization is a generalized phenomenon occurring at high stress.

• 대한토목학회논문집
• /
• 제30권2D호
• /
• pp.113-118
• /
• 2010

본 연구는 연속류 도로에서 안정교통류를 유지하기 위하여 교통흐름이 불안정한 현상을 감지하기 위한 방안을 제시하였다. 연속류 도로의 안정성이론에 기초하여 안정 교통류의 임계수준을 판단할 수 있는 교통류지표들 간의 관계를 도출하였다. 안정교통류임을 판단할 수 있는 거시적인 교통류 지표들이 다양한 상황에서 적용하기 어려운 점을 감안하여 본 연구에서는 검지기를 통해 측정된 연속차량의 속도배열에 대한 누적이동평균(IMA: Integrated Moving Average)을 사용하여 연속류 도로의 불안정성을 파악하는 모형을 개발하여 혼잡상황이 발생하기 이전에 진입교통량을 감소시키거나 속도제한을 통하여 혼잡을 사전에 예방할 수 있는 모형을 제시하였다. 천안-논산고속도로의 혼잡상황 자료를 바탕으로 분석한 결과 불안정 교통류 상황을 나타내는 안정도 평가지수인 값의 변화추세가 혼잡으로 인한 속도와 점유율 등의 시계열적 변화와 유사한 것으로 분석되었다.

• International Journal of Aeronautical and Space Sciences
• /
• 제18권3호
• /
• pp.485-497
• /
• 2017

The pogo phenomenon refers to a type of multidiscipline-related instability found in space launch vehicles. It is caused by coupling between the fuselage structure and other structural propulsion components. To predict the pogo phenomenon, it is essential to undertake adequate structural modeling and to understand the characteristics of the feedlines and the propulsion system. To do this, a modal analysis is conducted using axisymmetric two-dimensional shell elements. The analysis is validated using examples of existing launch vehicles. Other applications and further plans for pogo analyses are suggested. In addition, research on the pogo phenomenon of Saturn V and the space shuttle is conducted in order to constitute a pogo stability analysis using the results of the present modal analysis.

• 한국강구조학회 논문집
• /
• 제13권5호
• /
• pp.599-608
• /
• 2001

STEP 하중을 받고 있는 쉘형 구조물의 동적 불안정 문제를 다룬 연구 결과는 다소 발표되고 있으나 Hybrid 케이블 돔의 동적 불안정 문제를 다룬 연구는 아직 없는 실정이다. 또 카오스의 생성을 파악하기 위하여 위상면을 이용하여 동적 좌굴의 기본적 현상을 다룬 연구도 거의 없다. 본 연구에서는 기하학적 비선형을 고려한 Hybrid 케이블 돔의 간접좌굴을 수치적 기법으로 조사하고 이를 정적 임계하중과 비교하였다. 동적 좌굴하중은 비선형 운동방정식을 수치분석하여 결정하고 위상면을 이용하여 간접좌굴 현상을 규명한다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1995년도 추계학술대회논문집; 한국종합전시장, 24 Nov. 1995
• /
• pp.185-190
• /
• 1995

In recent years, many researcher have been interested in the stability of a thin beam. Among them, Pai and Nayfeh[1] had investigated the nonplanar motion of the cantilever beam under lateral base excitation and chaotic motion, but this study is associated with internal resonance, i.e. one to one resonance. Also Cusumano[2] had made an experiment on a thin beam, called Elastica, under bending loads. In this experiment, he had shown that there exists out-of-plane motion, involving the bending and the torsional mode. Pak et al.[3] verified the validity of Cusumano's experimental works theoretically and defined the existence of Non-Local Mode(NLM), which is came out due to the instability of torsional mode and the corresponding aspect of motions by using the Normal Modes. Lee[4] studied on a thin beam under bending loads and investigated the routes to chaos by using forcing amplitude as a control parameter. In this paper, we are interested in the motion of a thin beam under torsional loads. Here the form of force based on the natural forcing function is used. Consequently, it is found that small torsional loads result in instability and in case that the forcing amplitude is increasing gradually, the motion appears in the form of dynamic double potential well, finally leads to complex motion. This phenomenon is investigated through the poincare map and time response. We also check that Harmonic Balance Method(H.B.M.) is a suitable tool to calculate the bifurcated modes.

• Wind and Structures
• /
• 제18권2호
• /
• pp.103-116
• /
• 2014

Aeroelasticity is the main source of instability in structures which are subjected to aerodynamic forces. One of the major reasons of instability is the coupling of bending and torsional vibration of the flexible bodies, which is known as flutter. The presented investigation aims to study the aeroelastic stability of composite blades of wind turbine. Geometry, layup, and loading of the turbine blades made of laminated composites were calculated and evaluated. To study the flutter phenomenon of the blades, two numerical and analytical methods were selected. The finite element method (FEM), and JAR-23 standard were used to perform the numerical studies. In the analytical method, two degree freedom flutter and Lagrange's equations were employed to study the flutter phenomena analytically and estimate the flutter speed.

• 한국정밀공학회지
• /
• 제22권4호
• /
• pp.27-36
• /
• 2005

Some studies have shown that unstable factors are inherent in WEDM process, causing the instability of the discharging pulse to reach about 40∼60％ in normal machining. Transient stability is an important subject in WEDM process since there is a close relationship between stability and machining performance, such as the characteristics of a machined surface, machining speed and problem of instability like wire rupture phenomenon. Among the many machining parameters affecting WEDM machining state, three specific parameters (Vr, Ip, off time ) are major controllable variables that can be applied in transient stability control. And, this research investigates the implementation and analysis of real-time micro control of the discharging stability of WEDM (Wire Electric Discharge Machining) process.