• 반도체디스플레이기술학회지
• /
• 제16권3호
• /
• pp.8-13
• /
• 2017

In this paper, the measurement of the inner diameter dimension of the circular hole by using a machine vision system was studied. This paper was focused on the theory and key technologies of machine vision inspection technology for the improvement of measurement accuracy and speed of the micro circular holes. A new method was proposed and was verified through the experiments on Gray conversion, binarization, edge extraction and Hough transform in machine vision system processes. Firstly, the Hough transform was proposed in order to improve the speed increase and implementation ease, it demonstrated the superiority of Hough transform and improvement through a comparative experiment. Secondly, we propose a calibration method of the system in order to obtain exactly the inner diameter of the circular hole. Finally, we demonstrate the reliability of the entire system as a MATLAB-based implementation of the GUI program, measuring the inner diameter of the circular hole through the circular holes of different dimensions measuring experiment.

• 한국구조물진단유지관리공학회 논문집
• /
• 제14권3호
• /
• pp.186-195
• /
• 2010

본 논문은 SC합성보에 정착구의 높이, 새들의 형태, 가력시점을 변수로 하여 비부착 포스트텐션 보강을 하고 휨실험을 통해 보강방법을 평가하여 적절한 보강방법을 제시하고자 하엿다. 실험결과 보강 전 SC합성보의 최대내력은 실험값/이론값이 0.97로 나타났으나 보강 후는 1.00~1.21로 나타나 보강효과를 확인할 수 있었다. 변위 및 변형률 분석결과 정착구의 높이 및 가력시점에 상관없이 보강 후 중립축에 정착구를 설치한 D120계열 실험체가 최대하중이후 급격한 하중저하 없이 변위가 지속적으로 증가하며 각 부분의 변형률도 비교적 적게 나타나는 안정적인 거동을 했다. 보강효과면에서 선 가력 후 보강한 SCR-UD120실험체가 보강 전 SC합성보에 비해 최대내력이 1.72배 증가하여 가장 우수한 것으로 나타났다.

• Journal of Biosystems Engineering
• /
• 제28권1호
• /
• pp.45-52
• /
• 2003

Red ginsengs are inspected manually by examining those in the dark room with back light illumination. Manual inspection is often influenced by physical condition of inspectors. Sometimes. the best grade, heaven. has some inner holes though it was inspected by a specialist. In order to resolve this problem, this study was performed to develop image processing algorithm to detect the inner holes in the x-ray image of ginseng. Because of little gray value difference between background and ginseng in the image. simple thresholding method was not appropriate. Modified watershed algorithm was used to differentiate the inner holes from background and normal ginseng body. Inner hole edge region detected by watershed algorithm consists of many number of blobs including normal portions. With line profile analysis with scanning one line at a time beginning the starting point. it shelved two peaks both ends representing extracting each blobs. in which setting threshold value as of lower peak value enabled us to obtain inner hole image. Once this procedure has to be done till the finishing point it is completing inner hole detection for one blob. Thus. conducting ail blobs by this procedure is completing inner detection of one whole ginseng. Detection results of the inner holes fer various size of red ginsengs were good even though there was small detection variation. 6.2%. according to position of x-rat tube.

• 전기학회논문지
• /
• 제66권10호
• /
• pp.1508-1515
• /
• 2017

This paper proposes the defect detection method for automatic inspection machines in printed circuit boards (PCBs) manufacturing system. The defects of PCB such as open, short, pin hole and scratch can be detected by comparing the standard image and the target image. The standard image is obtained from CAD file such as ODB++ format, and the target image is obtained by arranging, filtering and binarization of captured PCB image. Since the PCB size is too large and image resolution is too high, the image processing requires a lot of memory and computational time. The wavelet transform is applied to compress the standard and target images, which results in reducing the memory and computational time. To increase the inspection accuracy, we utilize the he HH-domain as well as LL-domain of the transformed images. Experimental results are finally presented to show the performance improvement of the proposed method.

• 터널과지하공간
• /
• 제16권4호
• /
• pp.347-356
• /
• 2006

기존의 단선터널에 근접하여 신설터널의 시공시 기존터널의 안정성 확보를 최우선하기 위해 건전도 평가를 반영한 안정성 검토 수행 및 터널의 안전확보를 위해 검토 반영된 사례를 분석하였다. 건전도 평가결과 및 근접도 구분에 따른 신설터널에 대한 대책으로 선대구경수평심발과 Line Drilling을 병용하고 민가구간은 무진동암파쇄공법을 적용하여 진동과 소음을 허용치 이내로 제어하였다. 또한 신설터널 시공중에 발생할 수 있는 기존구조물에 대한 영향을 평가하여 열차의 운행과 사용중인 구조물의 안정성 확보를 위하여 Basset System을 계획하였다.

• 한국압력기기공학회 논문집
• /
• 제6권1호
• /
• pp.37-42
• /
• 2010

The stay cylinder weld at the steam generator of Korean Standard Nuclear Power Plants is safety class I component and is subjected to be inspected by the volumetric examination such as ultrasonic method. As accessibility of this area is limited due to the narrow space and high radiation, the existing manual inspection method involves various difficulties. Moreover operators may be exposed to internal contamination by contaminated dust during the surface buffing process to improve the inspection reliability of this area. Recently the new automatic inspection system for stay cylinder welds has been developed. The inspection system basically consists of a driving assembly, data acquisition device and signal processing units. The driving assembly is classified by 1) the scanner for inspecting and buffing the weld, 2) pillars for guiding the scanner and 3) the base frame for loading and supporting pillars. The scanner has 4 sensor modules to inspect in 4 refracted angles and 4 incident directions. These components can be inserted into the skirt of the stay cylinder through the manway hole and assembled easily by one-touch in the skirt. Data acquisition device and signal processing units developed in previous works are also newly upgraded for better processing of data analysis and evaluation. The system has been successfully demonstrated not only in the mock-up but also in the field. In this paper, newly developed inspection system for the stay cylinder weld of the steam generator is introduced and their field applications are discussed.

• 전자공학회논문지SC
• /
• 제46권6호
• /
• pp.14-20
• /
• 2009

영상 처리의 목표는 관찰자를 위하여 영상의 시각적인 측면을 개선하는 것이다. 히스토그램은 디지털 영상 처리의 기초 자료로 사용될 수 있는 중요한 도구이다. 그러므로 히스토그램을 효과적으로 관리하는 것은 디지털 영상 처리에 있어 매우 중요하다. 현재 머신 비전 검사 시스템은 여러 외관 검사 분야에서 사용되어지고 있다. 하지만 머신 비전 시스템에 의한 외관 검사 결과는 작업장의 조명에 의한 영향을 많이 받는다. 본 논문에서는 이러한 영향을 극복하기 위한 방법으로 히스토그램 변환을 이용해서 머신 비전 검사의 정확성을 향상시키는 방법을 제안하였다. 제안하는 방법은 영상 내에서 개선이 필요한 영역에 대한 히스토그램 변환을 수행함으로써, 이들 영역의 특징들을 향상시키는 효과를 거둘 수 있다. 본 논문에서 제안된 방법은 지그 플레이트의 외관 검사를 통해 검증하였다.

• 대한기계학회논문집A
• /
• 제28권6호
• /
• pp.867-875
• /
• 2004

In order to inspect burr geometry and hole quality in micro-drilling processes, a cost-effective method using an image processing and shape from focus (SFF) methods on the machine tool is proposed. A CCD camera with a zoom lens and a novel illumination unit is used in this paper. Since the on-machine vision unit is incorporated with the CNC function of the machine tool, direct measurement and condition monitoring of micro-drilling processes are conducted between drilling processes on the machine tool. Stainless steel and hardened tool steel are used as specimens, as well as twist drills made of carbide are used in experiments. Validity of the developed system is confirmed through experiments.

• 제어로봇시스템학회논문지
• /
• 제6권1호
• /
• pp.91-97
• /
• 2000

In this paper, the illuminator is designed to recognize the shape and the existence of holes of radiation fin in the point that the light reflection characteristics are different according to the roughness of the material. The threshold value, the positions of holes and the black pixel nembers in the positon are obtained under the illuminator, in accordance with the reference image, by applying binary conversion and hole segmentation algorithm, as they are suggested in this paper, The existence and shape of hole are recognized by calculating the distance and feature value in the test image, which is obtained from the parameters of reference image. It is programmed to apply to GUI(Graphic User the Interface) in windows. More than 98% of recognition rate is shown, as it is applied to three different sizes of the radiation fin.

• 한국재료학회지
• /
• 제24권11호
• /
• pp.617-624
• /
• 2014

To elucidate the effects of a pretreatment process on the uniformity of Ag electroless plating on Cu flakes, pretreatment time was mainly considered with a mixed solution of 0.15 M ammonium hydroxide and 0.0375 M ammonium sulphate. Optical inspection of Ag-coated Cu flakes determined that the optimal pretreatment time is 120 s. Repetition of the sequence in which Ag plating was done immediately after the pretreatment of 120 s clearly enhanced the plating uniformity. Scanning electron microscopy revealed that holes were formed irregularly on some Cu flakes during the period from the asdropping of an Ag precursor solution to 5 min. The hole formation was judged to be due to continuous removal of Cu on the local surfaces by the repetitive formation and elimination of $Cu_2O$ or $Cu(OH)_2$ layers. However, the increase of the amount of Ag coating suppressed the hole creation and increasingly enhanced the antioxidant property.