• 한국지능시스템학회논문지
• /
• 제19권2호
• /
• pp.259-264
• /
• 2009

Mobile용 TFT-LCD는 근거리에서, 세밀한 관찰 작업용으로 사용되는 경우가 많아 높은 수준의 품질관리가 요구되고 있으나, 높은 휘도값, 큰 휘도편차, 높은 검사 정밀도 등의 특징을 가지고 있어 동일한 검사기준을 적용하여도 작업자 혹은 제조라인에 따라 판단의 차이가 있으며 정량적인 품질관리가 어렵다. 또한, 다품종 대량생산 추세에 따라 검사 속도, 작업자의 피로도, 검사 시야의 한계 등 육안검사의 문제점이 대두되고 있다. 본 논문은 Mobile용 TFT-LCD 화면의 품질관리 및 검사기준과 동일한 기준에 의거하여 현장에 적용하기 쉬운 탁상형의 Mobile용 TFT-LED 화면 검사 장비를 개발하였다. 그리고 개발된 장비를 사용한 실험에서, 육안검사에 비하여 개선된 결과를 기반으로 안정적이고 수치화된 Mobile용 TFT-LCD 화면 품질 검사의 표준화 가능성을 제시한다.

• 방사선산업학회지
• /
• 제18권1호
• /
• pp.79-87
• /
• 2024

In a previous study, the suitability for use of inspection equipment was evaluated at temperatures outside the quality assurance range. The quality assurance operating temperature of the safeguards equipment is 0~+40℃, and previous studies have confirmed the performance of the safeguards equipment for temperatures ranging from -40~+70℃. The scintillator-based verification equipment showed a shift in the centroid channel and a change in the count rate in all temperature ranges, and the semiconductor-based safeguards equipment generated Leakage Current and equipment failure. In this study, a retrofit was performed applying a vacuum housing to the safeguards equipment (Inspector-2000-based inspection equipment), and performance evaluation was performed at a low temperature and snowy site, and it was confirmed that the same performance was observed as the measurement results at room temperature.

• 대한안전경영과학회지
• /
• 제12권4호
• /
• pp.73-80
• /
• 2010

The purpose of this study was to investigate the actual conditions of radiation safety supervision in animal clinics using inspection standard of X-ray generator for diagnosis. The surveys for inspection standard system, equipment condition, and safety supervision were carried out in 18 animal clinics randomly. The inspection standard included reproducibility of dose exposure, kVp, mAs, collimator accuracy test, collimator luminance test, X-ray view box luminance test, grounding system equipment test and external leakage current test. The surveys of equipment condition and safety supervision used one-on-one interview with 5 points measurement. As a result, 44.44% of reproducibility of dose exposure was proper, 81.25% of kVp test was good, and 100% of mAs test was appropriate. Also, 66.66% of collimator accuracy test was proper, 61.11% of collimator luminance test was good, 53.13% of X-ray view box luminance test was suitable. In addition, only 5.55% of grounding system equipment and ground resistance was proper, 63.64% of external leakage current test was appropriate in grounding system equipment test. The 100mA electric capacity of X-ray generator for diagnosis was popular with 44.44%, and its 55.56% was purchased used equipment. Monthly average of less than 50 times (61.11%) was top frequency in use, and no animal clinic had a thermo-luminescence dosimeter(TLD). The 16 animal clinics with radiation safety zone and 2 without radiation safety zone were appeared.

• 한국자동차공학회논문집
• /
• 제22권1호
• /
• pp.1-7
• /
• 2014

In the most of a nation, the safety and emission gas inspection system of a vehicle in service have been conducted with the most compatible inspection system according to its real environmental situation. Especially, the state of vehicle emission gas is measured by advanced emission gas inspection equipment. It has the problem that the decrease effect of an environmental pollution matter is not calculated by weight percent measurement type equipment. Therefore, in this study, the correlations for the results of emission gas measurement are analyzed by comparing a weight percent measurement type (IDLE+ASM2525 mode) and an advanced mass measurement type (IM240 mode). As the result, the selectivity of an emission gas by IM240 mode is higher than that by IDLE+ASM2525 mode. In the future, therefore, the introduction of IM240 mode and a mass measurement type equipment are necessary. Also, we need to prepare a vehicle emission gas inspection system for introducing IM240 mode.

• 대한안전경영과학회지
• /
• 제9권1호
• /
• pp.77-84
• /
• 2007

This study was planned to investigate what the main factor of the regulation compliance of inspection on harmful machine, instrument and equipment by industrial safety and health act is. This study subject was composed of three groups as employers, employees of manufacturing and using the harmful machine and safety inspectors. Manufacturing workplace were 236 places, using workplace were 201 places and the safety inspectors were 100 people. The study subject was sampled by stratified random sampling considering the type of harmful Machine. Data for analysis is collected from each sample using interview with structured questionnaires. Compliance is measured by 2, 3, and 4 point scale composed by 8 sub items such as general perception, understanding, clearness, necessity, relevancy, implementation, penalty, and general compliance of the regulation. The level of 8 items of employer's compliance are not differentiated among three groups. The determining factors for inspection observance of the workplace using the harmful Machine were understanding, penalty and cognized compliance. The determining factors for inspection observance of the workplace manufacturing the harmful Machine were understanding and object conformity. These results show that the strategy to adapt the regulated group to inspection regulation will be the elevation of understanding for regulation first of all.

• 반도체디스플레이기술학회지
• /
• 제20권2호
• /
• pp.126-130
• /
• 2021

The ball grid array is one of the packaging methods that used in high density printed circuit board. Solder void defects caused by voids in the solder ball during the BGA process do not directly affect the reliability of the product, but it may accelerate the aging of the device on the PCB layer or interface surface depending on its size or location. Void inspection is important because it is related in yields with products. The most important process in the optical inspection of solder void is the segmentation process of solder and void. However, there are several segmentation algorithms for the vision inspection, it is impossible to inspect all of images ideally. When X-Ray images with poor contrast and high level of noise become difficult to perform image processing for vision inspection in terms of software programming. This paper suggests the solution to deal with the suggested problem by means of using Mask R-CNN instead of digital image processing algorithm. Mask R-CNN model can be trained with images pre-processed to increase contrast or alleviate noises. With this process, it provides more efficient system about complex object segmentation than conventional system.

• 한국안전학회지
• /
• 제23권6호
• /
• pp.76-83
• /
• 2008

In the course of increasing in human and material damage caused by fire, it is an important research field to develop clean extinguishing agent which does no harm to global environment as well as has a good extinguishing efficiency. This research is a basic step to develop a new clean extinguishing agent. In order to get a satisfactory result, we tested fire extinguishing ability using nitrogen and Novec mixtures gas which are inert gas and new clean extinguishing agent. We used Cup Burner Test made by international standard ISO-14520 regulations of gaseous extinguishing agent ability test, and the fuels used in the test are n-heptane, methanol, ethanol, iso-propanol and 1-butanol. The experimental results of flame extinguishing concentration are n-heptane 6.54%, methanol 8.47%, ethanol 6.98%, isopropanol 6.10% and butanol 6.54% by pure Novec agent. So the finding is that a new clean agent, Novec has an efficient extinguishing ability in a state of gas. Also, in a test as to mixtures gas of nitrogen and Novec, it has a good result for minimum oxygen concentration is under 16%.

• 한국멀티미디어학회논문지
• /
• 제24권2호
• /
• pp.199-207
• /
• 2021

It is very important to support real-time on the inspection equipment based on Windows. In particular, in the system using MIL-STD-1553B communication, which is widely used in military weapon systems, real-time is required for inspection equipment that uses mostly platforms based on Windows such as Industrial PCs. However, in order to use a complete real-time operating system such as VxWorks, the purchase cost is expensive and the implementation is complicated on the system, so it is not suitable for inspection equipment that requires simple functions to just check go or no-go. Therefore, in this paper, a Real-Time implanted Kernel(RTiK) in the Windows kernel is implanted in order to improve these defects, and real-time performance is implemented for periodically MIL-STD-1553B communication by Deferred Procedure Call(DPC) of Windows. Also, it was verified that the period of up to 2ms was guaranteed with a RDTSC into the EDX:EAX registers for measuring the periodicity.

• 한국산학기술학회논문지
• /
• 제15권10호
• /
• pp.5906-5911
• /
• 2014

요즈음 생산되는 반도체의 제품이 제대로 작동하는지, 낮은 습도 또는 높은 온도에서 잘 견디는가를 검사하는 패키지 조립 및 검사 공정이 현장에 많이 있다. 또한 검사공정에서 사용되고 있는 반도체 테스트 핸들러 픽커 검사장비가 있는데, 본 연구에서는 CATIA 프로그램을 이용하여 3D 모델링하였으며, ANSYS 프로그램을 이용하여 반도체 테스트 핸들러 픽커 검사장비 프레임의 모델에 대하여 3가지 피로하중에 대한 해석을 하였다. 해석 결과로서 Case 1과 Case 2 모두 프레임의 가운데에서 최대 변형량이 발생하고 불규칙 피로 하중들 중에서 가장 하중의 변동이 심한 'SAE bracket history'가 가장 불안정하고 'Sample history'가 가장 안정함을 보이고 있다. 본 연구의 피로 해석 결과는 반도체 테스트 핸들러 픽커 검사장비 프레임의 파손방지 및 내구성을 검토함으로서 그 프레임의 설계에 효율적으로 활용이 될 수 있다.

• 한국방재학회 논문집
• /
• 제6권4호통권23호
• /
• pp.21-28
• /
• 2006

이 연구는 특정소방대상물의 소방시설에 대한 자체점검을 수행하는 소방시설관리사의 운용실태를 분석하고 개선방안을 제시하였다. 도시 공설소방서비스로 소방검사를 보완하는 자체점검을 수행하는 소방시설관리사를 대상으로 직무환경, 제도환경, 운용환경 등에 대해 설문조사를 실시하여 소방시설관리사제도의 운용실태에 대한 문제점을 실증적으로 파악하였다. 연구에 나타난 결과는 자체점검에 대한 법적 제도적 장치미비로 건물주와 소방검사원 그리고 소방시설관리사 상호간에 갈등이 있는 것으로 나타나 제도정착을 위해서는 상호보완 협력적 관계를 정립해야 할 것으로 나타났다.