• Asian-Australasian Journal of Animal Sciences
• /
• 제21권4호
• /
• pp.596-602
• /
• 2008

Ovotransferrin (OTf) was phosphorylated by dry-heating in the presence of pyrophosphate at pH 4.0 and $85^{\circ}C$ for 1 and 5 d, and the functional properties of phosphorylated OTf (PP-OTf) were investigated. The phosphorus content of OTf increased to 0.91% as a result of phosphorylation and the electrophoretic mobility of PP-OTf also increased. Although the solubility of dry-heated OTf slightly decreased, the decrease was reduced by phosphorylation. The stability against heat-induced insolubilization of OTf was somewhat improved by phosphorylation, but more than 70% of PP-OTf was insolubilized when it was heated at $70^{\circ}C$ for 10 min at pH 7.0. However, heat-induced insolubilization of PP-OTf was reduced when it was heated in the presence of phosphorylated ovalbumin. This may explain the excellent stability of phosphorylated egg white protein against heat-induced insolubilization which was reported previously. The emulsifying property of OTf was also somewhat improved by phosphorylation. The calcium phosphate-solubilizing ability of PP-OTf was enhanced. Although the degree of phosphorylation of OTf by dry-heating in the presence of pyrophosphate was similar to that of ovalbumin, the improvement of properties of PP-OTf was considerably different from those of phosphorylated ovalbumin.

• 한국환경보건학회지
• /
• 제23권3호
• /
• pp.27-39
• /
• 1997

This study, collaborated Gifu University, Japan, was performed to analyze chemical pollutants and microorganism and to clarify the distribution of sulfate-reducing bacteria and their insolubilization of heavy metal ions in leachates sampled seasonally between 1994 and 1996 from Nanjido waste landfill site, sampled 4 times between 1995 and 1996 from Pusan and Daejeon waste landfill site, and sampled 1 time between 1992 and 1994 from Hokkaido, Nagoya, Osaka and Hukuoka waste landfill site in Japan. The results were as follows: 1. The temperatures of internal leachate and leachate effluent were 40$\circ$C and 30$\circ$C, respectively, and the pH values of both leachates were about 8.0 at Nanjido waste landfill site. The concentration of SO$_4^{-2}$ gradually increased with the degree of stabilization and that of NO$_3$-N was detected in a part of sampling sites at one and half years, and in all sampling sites at 3 years after completion of landfill. 2. The organic substances in leachate of Nanjido waste landfill site decreased with the degree of stabilization and they were very fluctuated with measuring point and time. The concentration of organic substance and heavy metals in internal leachate were higher than in leachate effluent and those of Cd, Hg, and Pb were lower than detection limit except a part of samples in 1996. 3. APCs in internal leachate and leachate effluent were not much different and the minimum of APCs in internal leachate and leachate effluent were $1.0\times 10^4$/ml and $4.0\times 10^1$/ml, respectively. 4. The maximums of SRBs in Nanjido, Pusan, and Daejeon waste landfill site were 9180 MPN/ml, 24000 MPN/ml, and 348 MPN/ml, respectively and the maximum of SRBs in Japan waste landfill site was 9300 MPN/ml. 5. During 2-week-SRB culture, the values of MPN were high at 50$\circ$C for initial culture period and at 30$\circ$C for last culture period. MPN started to appear at first day and rapidly increased between 7th day and 9th day. 6. Cadmium and copper were insolubilized by SRB within 6 hr and iron and zinc were done within 48 hr. The rates of insolubilization of Cd, Cu, Fe, Zn, T-Cr were 100%, 99.5%, 95.0%, 99.8%, 16.1% after 48 hr treatment with SRB, respectively.

• 펄프종이기술
• /
• 제44권2호
• /
• pp.29-34
• /
• 2012

For the purpose of developing liner board for water-resistant corrugated board in the cold chain system, several types of base paper for corrugated board were purchased from the market and 6 different boards were produced in the paperboard mill by applying the chemicals on the base paper. Then, water-moisture resistant performance and physical properties of the boards were compared each other. The liner board which is dried at high temperature with pressure by Condebelt papermaking system(CK paper) showed a superior performance in strength over common liner boards. Strength of the board increased by surface chemical treatment up to 60% of compressive strength and 30% of bursting strength. Starch insolubilization with Ammonium-Zirconium Carbonate(AZC) and surface coating with a surface size and a moisture resistant chemical on CK paper showed the best result. Therefore, this method was recommended to produce the outer liner board for water -resistant corrugated board.

• 펄프종이기술
• /
• 제37권2호
• /
• pp.70-77
• /
• 2005

For the purpose of developing liner board for water resistant corrugated board in the cold chain system, several types of base paper for corrugated board were purchased from the market and 6 different boards were produced in the mill by applying the chemicals, chosen in the previous studies, on the base paper. Then water-moisture resistance and physical properties of the boards were compared each other. The liner board which is dried at high temperature with pressure by Condebelt (CK paper) showed a superior performance in strength over common liner boards. Strength of the board increased by surface chemical treatment up to $60\%$ of compressive strength and $30\%$ of burst strength. Starch insolubilization with Ammonium Zirconium Carbonate and surface coating with a surface sizing agent and a moisture resistant chemical on CK paper showed the best result. Therefore this method was recommended to produce the outer liner board for water resistant corrugated board.

• 한국환경보건학회지
• /
• 제26권4호
• /
• pp.65-74
• /
• 2000

The sensitivity of a mehtanogen and sulfate-reducing bacterium isolated from a sea-based landfill site Cd$^{2+}$ and CU$^{2+}$ was studied. Methanogens and sulfate-reducing bacteria in leachates of the waste disposal site were enumerated using the MPN method. Methanobacterium thermoautotrophicum KHT, isolated from the leachate, could not grow at 0.5 mM Cd$^{2+}$ or 1.0 mM CU$^{2+}$. Desulfotomaculum sp. RHT, isolated from the same leachate, was able to insolubilization 3.0 mM Cd$^{2+}$ or 2.0 mM CU$^{2+}$ by production of hydrogen sulfide. When strains KHT and RHT were cultured together in the presence of the heavy metals, strain KHT could grow at high heavy metal concentrations after insolubilization of the metals by strain RHT. strain RHT.

• 한국식품과학회지
• /
• 제33권6호
• /
• pp.769-773
• /
• 2001

두유에서 발생되는 비지와 대두의 일반성분과 단백질의 추출률을 비교하기 위해 시간, 온도, pH별로 분석하였고, 단백질 분자들 사이의 상호작용에 관여하는 물질 urea, SDS, 2-mercaptoethanol를 사용하여 비지단백질의 insolubilization mechamism을 조사하였다. 또한 enzyme modification으로 기능성을 향상시켜 식품소재로서의 이용 가능성에 대해 분석하였다. 비지와 대두는 각각 37.3%, 42.5%의 단백질을 함유하고 있으며 비지는 생산공정 증의 과도한 열처리에 의하여 극히 낮은 용해도를 나타냈다. 비지단백질의 낮은 용해도는 주로 disulfide bonding에 의한 cross linking에 기인하는 것으로 밝혀졌다. 비지단백질과 대두단백질은 pH 3, pH 4에서 가장 낮은 용해도를 보였다. Carbohydrase와 protease를 첨가하여 단백질의 추출츌을 비교한 결과는 비지와 대두는 carbohydrase에서 미세한 반응을 보여 단백질의 용해도에 큰 영향을 주지 못하였으나 여러 protease 가운데 Alcalase는 비지단백질의 용해도를 급격히 증가시켰다.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.302-302
• /
• 2006

Nanoaggregates of triple hydrophilic block copolymers comprised of poly(ethylene oxide), poly(sodium 2-acrylamido)-2-methylpropanesulfonate), and poly(methacrylic acid) (PEO-PAMPS-PMAA) and the cationic surfactant, dodecyltrimethylammonium chloride (DTAC) have been fabricated. The formation of $^{\circ}^{\circ}$the nanoaggregates is based on electrostatic interaction of sulfonate and carboxylate groups of PAMPS and PMAA blocks with the cationic surfactant, which results in insolubilization of these blocks. The formation of micelle is observed by dynamic light scattering measurements. Binding of DTAC to the anionic blocks of PEO-PAMPS-PMAA is confirmed by electrophoresis measurements.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.2
• /
• pp.459-463
• /
• 2006

For the purpose of developing liner board for water-resistant corrugated board in the cold chain system, several types of base paper for corrugated board were purchased from the market and 6 different boards were produced in the paperboard mill by applying the chemicals on the base paper. Then, water-moisture resistant performance and physical properties of the boards were evaluated and compared each other. The liner board which is dried at high temperature with pressure by the Condebelt showed a superior performance in strength over conventional liner boards. Strength of the board increased by surface chemical treatment up to 60% of compressive strength and 30% of bursting strength. Starch insolubilization with Ammonium-Zirconium -Carbonate and surface coating with a surface size and a moisture resistant chemical on CK paper showed the best result. Therefore, this method was recommended to produce the outer liner board for water -resistant corrugated board.

• 한국환경보건학회지
• /
• 제31권3호
• /
• pp.221-226
• /
• 2005

Isoflavone was extracted with various concentration of aqueous methanol using whole hypocotyls as the starting material. Whole hypocotyls were preferred as the raw material because the residue could be easily removed from the solvent after the extraction process. Extraction yield was almost constant at the methanol concentration of $20-80\%$. Most of the isoflavone was extracted within 1 hr, and the extraction yield remained almost constant thereafter. When the concentration of methanol was $80\%$, the content of total solid was reduced due to the reduced extraction of contaminating protein as the result of protein insolubilization. Among resins tested, Diaion HP-20, Amberlite XAD-16, and Amberlite IRC-50 showed the highest capacity to absorb the compound. Open column chromatography with Diaion HP-20 showed that $80\%$ aqueous ethanol was most efficient as the eluting solvent with final recovery of the phytochemical being more than $95\%$. Maximum adsorption of the phytochemical occurred at the acidic pH 2-4. When the spatial velocity was increased to 15 and more, the degree of adsorption was decreased, whereas below spatial velocity of 15, the adsorption capacity of isoflavone to the resin was almost constant. The purity of the isoflavone purified by column chromatography was $78\%$.

• 한국식품과학회지
• /
• 제30권2호
• /
• pp.372-378
• /
• 1998

Formaldehyde첨가 대두단백필름과 formaldehyde흡착 대두단백필름을 대조구용 대두단백필름과 함께 제조하여 각 필름의 색깔, 인장강도, 연신율, 투습도 및 수분용해도 등을 측정하여 제조방법에 따른 효과를 조사하였다. formaldehyde의 처리방법에 따라 필름의 특성은 크게 영향을 받았다. formaldehyde첨가 대두단백필름의 물리적 특성은 대조구인 대두단백필름에 비해 큰 차이가 없었으나 formaldehyde흡착 대두단백필름은 그 특성이 크게 변하였다. Formaldehyde흡착 필름은 가교결합이 형성되어 필름의 수분용해도가 26.1%에서 16.6%로 크게 감소하였으며, 인장강도는 2배가 증가한 반면 필름의 연신율은 2배로 감소하였다. 이는 formaldehyde와 반응하여 단백질 분자 사이에 가교결합이 형성되면서 단백질이 불용화 및 경화되었기 때문이다.