• Korean Journal of Applied Biomechanics
• /
• v.14 no.2
• /
• pp.105-119
• /
• 2004

To enhance our understanding of the loads on the foot during treadmill running, we have used a pressure-sensitive insole system to determine pressure, rate of loading and impulse distributions on the plantar surface during treadmill running, both in minimally cushioned footwear and in cushioned shoes. This report includes pressure, rate of loading, impulse and contact time data from a study of ten subjects running on a treadmill at 4.0m/s. Among heel-toe runners, the highest peak pressures and highest rates of loading were observed under the centre of the heel and in the medial forefoot. The arch regions were only lightly loaded. Contact time was greater in the forefoot than in the heel. Two-thirds of the impulse recorded during the step was the result of forces applied through the forefoot, mostly in the region of the metatarsal heads. The distribution of loads in the shoe suggests that the load distributing properties of the cushioning system are most important in the centre of the heel, under the metatarsal heads and great toe. Shock attenuation is primarily required under the centre of the heel and to lesser extent under the metatarsal heads. Some energy dissipation may be desirable in the heel region because it causes shock to be absorbed with less force. All the 'propulsive' effort is applied through the forefoot. Therefore, this region should as resilient as possible.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.41 no.3
• /
• pp.420-432
• /
• 2017

This study examined user needs for compression pant development for women with pes planus in their 50s and 60s. A total of 355 women aged 50 to 69 participated in the survey and interview. Questions were asked if they had pes planus, the using condition of foot orthotic, inconveniences during gait, and wearing condition of compression pants. The results showed that 42 (11.8%) women had pes planus. Orthotic insole and arch support were used most frequently. The most uncomfortable aspect of foot orthotic (n=146) was that it was difficult to use unless they were going outside. Participants with pes planus responded that they felt discomfort on the inner area of propodium, metatarsus, ankle, and knee during gait. The purchase and wearing rate of compression pants were not high; however, compression pants were purchased with specific needs and purposes. Respondents mainly wore the compression pants for sports activities. M size was the most frequently worn size. They preferred high waist type leggings and there was a need to increase the compression strength of the waist, thigh, knee and ankle. Additionally, the ease of donning and doffing were discussed.

• The Journal of Korean Physical Therapy
• /
• v.24 no.4
• /
• pp.241-246
• /
• 2012

Purpose: We investigated the effect of postural stability and balance with foot orthotics in hemiplegic patients. Methods: The subjects enrolled in this study were 16 hemiplegic patients who were examined for balance ability, weight distribution, and limits of stability with or without foot orthotics insole. Balance was measured according to a stance position by BIORESCUE: static balance open eyes (SEO), static balance close eyes (SEC), dynamic balance open eyes (DEO), dynamic balance close eyes (DEC), right and left weight distribution (RLWD), anterior and posterior weight distribution (APWD) and limit of stability (LOS). The data were analyzed with SPSS window version 18.0 (IBM Co., Armonk, NY, USA). Results: The results were of significant changes to the SEO (p<0.05), RLWD (p<0.05), APWD (p<0.05), and LOS (p<0.05). The SEC, DEO and DEC were not found to be statistically significant. Conclusion: It was found that foot orthotics affected the balance for hemiplegic patients. Therefore, it is thought to help fall prevention to measure the balance ability.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.24 no.6
• /
• pp.1117-1128
• /
• 2010

The purpose of this study is to know recent studies about conservative treatment of osteoarthritis in knee joint. We reviewed and analyzed 71 theses published by korean research institution since 2000. These theses were classified by year, field of study and subject. The results of this study are as follows. 1. We found 24 oriental medical theses about osteoarthritis in knee joint since 2000. 2. Classified by the major field of study, the journal of korea acupuncture and moxibustion society accounted for 17 pieces in oriental medical journals. 3. In oriental medicine, the most subject is acupuncture(19 pieces). 13 pieces in it is about pharmacopuncture. 4. 47 theses are published in medical journals after 2000. 5. 35 associations dealt with this theme, the korean society of physical medicine is major. 6. Most subject is kinesitherapy, followed by pharmacotherapy, massotherapy, taping therapy, physiotherapy and insole. We found several therapies were effective through oriental and western medical theses. Combined oriental medicine and western conservative therapy like kinesitherapy make better effect on osteroarthritis of knee joint.

• Physical Therapy Korea
• /
• v.14 no.2
• /
• pp.85-90
• /
• 2007

In many manufacturing occupations, industrial workers reported foot or lower leg problems such as discomfort, pain or orthopedic deformities. This study investigated the effects of two different working conditions upon assembly worker's perception of discomfort and foot pain associated with various body parts. Twenty-three male volunteers performed work in the factory. Ergonomic intervention has been to modify the flooring in an attempt to alleviate the problems associated with constrained standing and walking work. The worker's standing conditions consisted of standing on a hard floor while wearing shoe insoles. Questions were asked regarding body discomfort and foot pain. Significant differences in body discomfort and foot pain were found when comparing the overall effects of wearing shoe insoles on a hard floor (p<.05). This investigation indicated that shoe insoles reduced body discomfort and foot pain (p<.05).

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2007.11a
• /
• pp.5-9
• /
• 2007

The construction method for Foamed-Concrete has not been important due to following process of construction work. However, according to the code about enhance of energy saving design policy and impact noise, noised isolation has been used in construction site so that the resistance for cracking and capability for insulating of Foamed-Concrete has been required. Therefore, new alternatives are demanded. Optimum mixing design, which can get the improvement of insulation and resistance of crack for Foamed-Concrete adding EVA chip, was derived and also the device, applying to construction site, was invented to equalize quality. This device can measure quantity of all input and placement, and show up the sum of placement and mixing design on a touch screen. This valuable construction method is friendly environment and recycling method because of using EVA chip, by-product of an EVA insole scrap burned or embedded, as a light-weight aggregate.

• Korean Journal of Applied Biomechanics
• /
• v.29 no.3
• /
• pp.167-172
• /
• 2019

Objective: The aim of this study was to investigate the effect of midsole hardness of running shoe on muscle fatigue and impact force during distance running. Method: Ten healthy college recreational runners who were performing distance running at least three times a week participated in this experiment. They were asked to run for 15 minutes in the treadmill at 10 km/h with running shoes having three different types of midsole hardness (Soft, Medium, Hard). EMG signal and insole pressure were collected during the first and last one minute for each running trials. Data were analyzed using a one-way analysis of variance (ANOVA) with repeated measures. Results: Midsole hardness did not affect the consistency of stride length. For the median frequency of the EMG signal, only VL was affected by midsole hardness; that of medium was greater than other midsoles (p<.05). The loading rate of impact forces increased by midsole hardness (p<.01). Conclusion: Although soft midsole could attenuate impact forces at heel contact, it might have a negative effect on the fatigue of muscle which could decelerate the body after heel contact. Therefore, it is necessary to select the optimum hardness of midsole carefully for both reduction impact forces and muscle fatigue.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2021.07a
• /
• pp.317-320
• /
• 2021

본 연구는 주기적인 알츠하이머 병의 중증도 모니터링을 위해 스마트 인솔을 통한 보행 특징 추출과 머신러닝 기반 중증도 분류의 성능에 대해 살펴보았다. 최근 고령화가 가속화되는 추세에 있어 치매 환자가 급증하고 있으며, 중증도가 심해질수록 필요한 치료 비용 및 노력이 급증하기 때문에 조기 진단이 최선의 치료 전략으로 보여진다. 환자 친화적이고 저비용의 관성 측정 장치가 내장된 스마트 인솔만을 사용하여 다양한 보행 실험 패러다임에서 환자의 보행 특징을 추출하고, 이를 알츠하이머 병의 중증도 진단을 위한 머신러닝 기반 분류기를 훈련시켜 성능을 평가한 결과, 숫자세기와 같이 뇌에 부하를 주는 하위 작업이 포함된 복합 보행을 측정한 데이터셋을 사용하여 훈련된 분류 모델이 일반 걷기 데이터셋을 사용한 모델보다 성능이 높게 나타나는 것이 관찰되었다. 본 연구는 안전하고 환경적 제약이 적은 방법을 사용하여 시기 적절한 진단뿐만 아니라 주기적인 중증도 모니터링 시스템의 일환으로 활용될 수 있을 것이다.

• PNF and Movement
• /
• v.21 no.3
• /
• pp.273-280
• /
• 2023

Objective: In patients with temporomandibular joint disorders, air insoles are used to investigate functionality and pain changes in the temporomandibular joint when walking in daily life. Intervention: Sixty-five patients with temporomandibular joint disorder were recruited: 34 as a control group who walked more than 7,000 steps a day in daily life, and 31 as an experimental group who were instructed to take at least 7,000 steps every day while wearing their air insoles. Measurements: To determine the effects of air insoles on temporomandibular joint pain, steady-state pain, maximum mouth opening, average pain, and the most severe pain were measured before and after the experiment. In addition, to evaluate functionality, the ability to open the mouth in a comfortable state, pain when opening the mouth, and the point of sound and maximum degree to which the mouth could be opened were evaluated before and after the experiment. Results: Pain, mouth openness, and sound points showed significant differences from the control group after the experiment, and the maximum mouth opening range showed no significant difference. Conclusion: When air insoles were used by patients with temporomandibular joint disorder, the functionality of the temporomandibular joint was improved and pain was decreased.

• Journal of the Ergonomics Society of Korea
• /
• v.36 no.5
• /
• pp.395-409
• /
• 2017

Objective: The purpose of this study was to optimize the number and positions of foot pressure sensors using the reliability analysis of the center of pressure (COP) in smart shoes. Background: Foot pressure can be different according to foot region, and it is important which region of the foot pressure needs to be measured. Method: Thirty adults (age: $20.5{\pm}1.8years$, body weight: $71.4{\pm}6.5kg$, height: $1.76{\pm}0.04m$) participated in this study. The foot pressure data were collected using the insole of Pedar-X system (Novel GmbH, USA) with a sampling frequency of 100Hz during 1.3m/s speed walking on the treadmill (Instrumented treadmill, Bertec, USA). The intraclass correlation coefficients (ICC) were calculated between the COP positions using 4, 5, 6, 7, 8, and 99 sensors, while one-way repeated measure ANOVA was performed between the standard deviation (SD) of the COP positions. Results: The medio-lateral (M/L) COP position using 99 sensors was positively correlated with the M/L COP positions using 6, 7, and 8 sensors; however, it was not correlated with the M/L COP positions using 4 and 5 sensors during landing phase (1~4%) (p<.05). The antero-posterior (A/P) COP position using 99 sensors was positively correlated with the A/P COP positions using 4, 5, 6, 7, and 8 sensors (p<.05). The SD of the COP position using 99 sensors was smaller than the SD of the M/L COP positions using 4, 5, 6, 7, and 8 sensors (p<.05). Conclusion: Based on our findings, it is desirable to arrange at least 6 sensors in smart shoes. Application: The study of optimizing the number and positions of foot pressure sensors would contribute to developing more effective smart shoes using foot pressure technology.