• 제목/요약/키워드: Input power decrease

검색결과 125건 처리시간 0.02초

수소 플라즈마 처리를 이용한 구리-구리 저온 본딩 (H2 Plasma Pre-treatment for Low Temperature Cu-Cu Bonding)

  • 최동훈;한승은;추혁진;김인주;김성동
    • 마이크로전자및패키징학회지
    • /
    • 제28권4호
    • /
    • pp.109-114
    • /
    • 2021
  • 상압 수소 플라즈마 전처리가 구리-구리 직접 본딩에 미치는 영향에 대해서 조사하였다. 상압 수소 플라즈마 처리를 통해 구리 박막의 표면 산화층을 환원시킬 수 있었음을 GIXRD 분석을 통해 확인하였다. 플라즈마 파워가 크고 플라즈마 처리 시간이 길수록 환원력 및 표면 거칠기 관점에서 효과적이었다. DCB를 이용한 계면 결합 에너지 측정에서 상압 수소 플라즈마 전처리 후 300℃에서 본딩한 경우 양호한 계면 결합 에너지를 나타내었으나, 본딩 온도가 낮아질수록 계면 결합 에너지가 낮아져 200℃에서는 본딩이 이루어지지 않았다. 습식 전처리의 경우 250℃ 이상에서 본딩한 경우 강한 결합력을 보였으며, 200℃에서는 낮은 계면 결합 에너지를 나타내었다.

열전발전을 위한 DC-DC Converter의 입력측 전압·전류 센서없는 최대전력점 추적방식 (Maximum Power Point Tracking Method Without Input side Voltage and current Sensor of DC-DC Converter for Thermoelectric Generation)

  • 김태경;박대수;오성철
    • 한국산학기술학회논문지
    • /
    • 제21권3호
    • /
    • pp.569-575
    • /
    • 2020
  • 최근, 화석연료 고갈과 온실 가스 배출에 대한 우려가 높아지면서 신·재생 에너지 기술에 대한 연구가 주목을 받고 있다. 휴대용 전자기기 및 웨어러블 디바이스의 수요가 증가하고 IT기기들이 소형화되면서 배터리의 크기, 사용시간 등의 한계를 극복하기 위한 기술로 에너지 하베스팅이 있다. 본 논문에서는 열전소자의 V-I 특성곡선과 내부저항을 분석하고, 기존의 MPPT제어방식을 비교하였다. P&O제어방식은 열전소자의 전압, 전류를 측정하기 위한 센서 2개를 사용해야하기 때문에 경제적으로 비효율적이다. 따라서 본 논문에서는 출력전압 조절을 위한 센서1개만을 이용하여 MPP를 추적하는 새로운 MPPT제어방식을 제안한다. 제안하는 MPPT제어방식은 duty ratio와 부하의 출력전압의 관계를 이용하였으며, DC-DC Converter의 출력전압을 주기적으로 샘플링하여 duty ratio를 증가 또는 감소시켜 최적의 duty ratio를 찾아 MPP를 유지하도록 제어된다. DC-DC Converter는 Two-Switch 토폴로지인 Cascaded boost-Buck Converter를 이용하여 회로도를 설계하였다. 제안된 MPPT 제어방식은 PSIM 시뮬레이션을 이용한 모의실험을 통하여 검증하였고, 그 결과 열전소자의 V-I 특성곡선으로부터 얻어지는 MPP에서 전압×전류 및 전력값(V=4.2V, I=2.5A, P=10.5W)과 일치함을 확인하였다.

용강 중 Al 최대 농도에 대한 Al 드로스 장입 조건의 영향: 전기로 공정 내 화학 에너지 향상을 위한 기반 연구 (Influence of Charging Condition of Al-dross on Maximum Concentration of Al in Molten Steel : Fundamental study for improvement of chemical energy in EAF process)

  • 김규완;김선중
    • 자원리싸이클링
    • /
    • 제28권4호
    • /
    • pp.44-50
    • /
    • 2019
  • 국내 전기로 공정에서 산화 반응열 및 탄소 연소열 등으로 인한 화학에너지는 전체 투입 에너지 대비 30%정도로 알려져 있다. 전기로에서 $CO_2$를 저감하기 위해서는 전기로 용해 구간 중에 사용되는 전력에너지를 줄이고 화학에너지 사용을 높여야 한다. 일반적으로 용강 중 탄소를 단독으로 투입할 경우, 탄소가 용강에 용해되기 전 낮은 밀도로 인해 슬래그 층으로 부유한다. 용강 중 탄소 농도가 높을 시 취입하는 산소와 용강 중 탄소의 연소반응으로 인해 전력에너지를 낮추며 화학에너지 사용량을 높일 수 있다. 따라서 탄소 연소열의 효율을 높이기 위해서는 용강 중 새로운 탄재 장입 조건이 필요하다. 한편, Al 제련 후의 부산물로 알려져 있는 Al 드로스는 금속성 Al을 25 mass% 이상 함유하고 있으며 Al은 탄소와 비교하여 높은 산화열을 가지고 있다. 그러나 Al 드로스는 재활용이 어려워 거의 매립하고 있으며, Al 드로스 내 Al의 산화열을 효과적으로 활용하기 위해서는 철강 공정 적용에 대한 연구가 필요하다. 본 연구에서는 화학 에너지의 활용 증대를 위한 기반연구로서, 분코크스와 Al 드로스를 화학에너지 연료로서 활용하여 다양한 배합비 및 반응 온도에서 용강 중 탄소 및 알루미늄의 용해 농도와 용해효율을 조사하였다.

한국, 일본, 글로벌 택배기업의 효율성 및 생산성 비교 분석 (Comparative Analysis on Efficiency and Productivity for Korea, Japan and Global Parcel Delivery Companies)

  • 마진희;안영효
    • 유통과학연구
    • /
    • 제14권3호
    • /
    • pp.73-83
    • /
    • 2016
  • Purpose - The parcel delivery service(courier) industry all over the world has been expanding its market so far, but its growth has been declining in recent years. In this situation, most parcel delivery companies are having trouble with managing themselves because of the pressure from the customer to increase service level and decrease the rate. The purpose of this study is to provide ways to improve competitive advantages of the parcel delivery service industry by evaluating the multi-period operating efficiency of Korea, Japan and global service providers. Research design, data, and methodology - The data for the period of 2011 to 2014 were collected from the annual reports published by parcel delivery companies. In this study, we analyze the marketability (revenue), profitability (operating profits), and management conditions (net profits) of parcel service companies by combining information on human resources (number of employees) and material resources (total assets and equity). Therefore, the number of employees, total assets, and equity are selected as input variables, and revenue, operating profits, and net profits as the output variables. In this study, DEA (Data Envelopment Analysis) is used to measure the comparative efficiency and MPI (Malmquist Productivity Index) is used to analyze the trend of change of the efficiency for a multi-year period. Results - The operational efficiency scores of medium-sized parcel delivery companies in Korea are higher than other larger competitors such as Korean, Japan and Global larger companies. As of 2014, Logen(1.878) was found to be the most efficient parcel delivery enterprise, followed by KGB (1.224), and Kyoungdong(1.002). Otherwise, Hanjin(0.235), CJ(0.262), Hyundai Logistics(0.657), DHL(0.611), UPS(0.766), FedEx(0.498), TNT(0.350), Yamato(0.762) and Sagawa(0.520), larger sized companies, were done inefficiently. The productivity of parcel delivery companies is influenced by endogenous factors as well as exogenous ones such as changes in business environment and technological advances. Conclusions - Korean medium-sized companies have relatively high efficiency scores in operation. That is why they still survive the competitive market in Korea where market restructuring on the industry has been expected to be conducted for many years. The reason why medium-sized couriers had higher efficient scores than larger couriers is that most of couriers spend more operating expenses versus unit price of delivery which is the amount of money that is needed in order to send a package by parcel service. So the delivery unit price must be taken into account by all the expenses associated with the cost of fuel, labor and maintenance expenses for facilities, etc. therefore, the unit price must be increased to strengthen business competitive power. In order for the industry to have more competitive advantage, the companies need to make profits by increasing demand volume and raising the delivery rate to provide high-quality delivery service to customers. And both endogenous and exogenous change must take precedence in order to strengthen their competitiveness.

AMOLED 컬럼 구동회로 응용을 위한 시분할 기법 기반의 면적 효율적인 10b DAC (An Area-Efficient Time-Shared 10b DAC for AMOLED Column Driver IC Applications)

  • 김원강;안태지;이승훈
    • 전자공학회논문지
    • /
    • 제53권5호
    • /
    • pp.87-97
    • /
    • 2016
  • 본 논문에서는 시분할 기법을 적용하여 AMOLED 컬럼 구동회로용 DAC의 유효 채널 면적을 최소화한 2단 저항 열 기반의 10비트 DAC를 제안한다. 제안하는 DAC는 시분할 기법 기반의 DEMUX, 6비트 및 4비트의 2단 저항 열 구조를 기반으로 하는 롬 구조의 디코더를 2단계로 사용하여 기존의 디스플레이용 DAC보다 빠른 변환속도를 가지는 동시에 하나의 패널 컬럼 구동을 위한 DAC의 유효 면적을 최소화하였다. 두 번째 단 4비트 저항 열에서는 DAC 채널의 면적과 부하 영향을 줄이는 동시에 버퍼 증폭기로 인한 채널 간 오프셋 부정합을 제거하기 위해 기존의 단위-이득 버퍼 대신 간단한 구조의 전류원으로 대체하였다. 제안하는 1:24 DEMUX는 하나의 클록과 5비트 2진 카운터만을 사용하여, 하나의 DAC 채널이 24개의 컬럼을 순차적으로 구동할 수 있도록 하였다. 각 디스플레이 컬럼을 구동하는 출력 버퍼 입력 단에는 0.9pF의 샘플링 커패시터와 작은 크기의 source follower를 추가하여 top-plate 샘플링 구조를 사용하면서 채널 전하 주입에 의한 영향을 최소화하는 동시에 출력 버퍼의 신호정착 정확도를 향상시켰다. 제안하는 DAC는 $0.18{\mu}m$ CMOS 공정으로 제작하였으며, DAC 출력의 정착 시간은 입력을 '$000_{16}$'에서 '$3FF_{16}$'으로 인가했을 때 62.5ns의 수준을 보인다. 제안하는 DAC 단위 채널의 면적 및 유효 채널 면적은 각각 $0.058mm^2$$0.002mm^2$이며, 3.3V의 아날로그 및 1.8V의 디지털 전원 전압에서 6.08mW의 전력을 소모한다.