• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.5
• /
• pp.619-628
• /
• 2010

Shape Memory Alloy (SMA) has recently received attention in developing implantable surgical equipments and it is expected to lead the future medical device market by adequately imitating surgeons' flexible and delicate hand movement. However, SMA actuators have not been used widely because of their nonlinear behavior called hysteresis, which makes their control difficult. Hence, we propose a parameter, $t_1$, which is necessary for temperature control, by analyzing the open-loop step response between current and temperature and by comparing it with the values of linear differential equations. $t_1$ is a pole of the transfer function in the invariant linear model in which the input and output are current and temperature, respectively; hence, $t_1$ is found to be related to the state variable used for temperature control. When considering the parameter under heat treatment conditions, $T_{max}$ was found to assume the lowest value, and $t_1$ was irrelevant to the heat treatment.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.8
• /
• pp.40-51
• /
• 1996

This paper describes some research works of computer-aided design of blanking and piercing progressive die for stator and rotor parts. An approach to the system is based on knowledge based rules. The deveolped system is composed of six modules such as main program, input and shape treatment, production feasibility check, strip layout, die layout and drawing edit module. Using this system, design parameters ( geometric shapes, die and punch dimensions and dimensions of tool elements) are determined and output is gen- erated in graphic from. Knowledges for tool design are extracted from the plasticity theories, handbooks, relevant references and empirical know-hows of experts in blkanking companies. The developed system provides powerful capabilities for process planning and die design of stator and rotor parts.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.6
• /
• pp.22-32
• /
• 1998

This paper describes a research work of developing a computer-aided design of irregularly shaped-sheet metal product with bending and piercing operation for progressive working. An approach to the CAD system is based on the knowledge-based rules. Knowledge for the CAD system is formulated from plasticity theories, experimental results and the empirical knowledge of field experts. The system has been written in AutoLISP on the AutoCAD with a personal computer and is composed of five main modules, which are input and shape treatment, flat pattern-layout, production feasibility check, blank-layout, and strip-layout module. Based on knowledge-based rules, the system is designed by considering several factors, such as radius and angle of bend, material and thickness of product, complexities of blank geometry and punch profile, and availability of press. This system is capable of unfolding a formed sheet metal part to give flat pattern and automatically account for the adjustment of bend allowances to match tooling requirements by checking dimensions and the best utilization ratio of blank-layout within bending production feasibility area which is beyond ${\pm}30^{\circ}$ degrees intersecting angle between grain flow and bending edge line and which is suitable to progressive bending operation. Also the strip-layout drawing generated by a bending and a piercing operation according to punch profiles divided into automatically for external area of irregularly shaped-sheet metal product is displayed in graphic forms.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.591-594
• /
• 2000

This paper describes a research work of developing a computer-aided design of product with bending and piercing for progressive working. An approach to the system for progressive working is based on the knowledge-based rules. Knowledge for the system is formulated from plasticity theories, experimental results and the empirical knowledge of field experts. The system has been written in AutoLISP on the AutoCAD with a personal computer and is composed of four main modules, which are input and shape treatment, flat pattern layout, strip layout and die layout module. Based on knowledge-based rules, the system is designed by considering several factors such as radius and angle of bend, material and thickness of product, complexities of blank geometry and punch profile, bending sequence, and availability of press. Strip layout drawing generated by the piercing processes with punch profiles divided into for external area is simulated in 3-D graphic forms, including bending sequences for the product with piercing and bending. Results obtained using the modules enable the manufacturer for progressive working of electronic products to be more efficient in this field.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.8
• /
• pp.1041-1047
• /
• 2011

In this study, two types of die material cast iron was treated for surface hardening by using high power diode laser to improve mechanical properties of die which is using as essential production technology in the parts manufacturing in virtually all the infrastructure industries now. First of all, the heat treatment characteristics of FCD550 material which is spheroidal graphite cast iron, and through the heat treatment of HCI350 material which is flake graphite cast iron, the heat treatment characteristics of the two materials were compared. The hardness of hardened zone increased over 3 times over base material for both specimens, but as for required heat input, HCI350 was higher than FCD550 material depending on the heat conductivity of the materials by the content amount and shape of graphite contained in the material.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.47 no.2
• /
• pp.80-84
• /
• 2002

In spite of simple and cheap cultivation method, water broadcast-seeded rice demonstrates uneven and unstable seedling establishment per unit land area and requires more herbicide and labor-input for weed control. Three experiments were conducted in a phytotron at 18$^{\circ}C$ to evaluate the adaptability of seed-mat mulching cultivation technologies in water seeded rice for the uniform seedling establishment and the inhibition of weed occurrence without herbicide application. Five different kinds of mat with different mesh sizes and fabric properties were tested. The emergence of rice was the highest in Lawn-mat treatment, being comparable with the control, in which seeds were sown without mat. The Lawn-mat also exhibited the lowest mat tension. Mat tension may influence the emergence of rice. And once it was soaked in water, it didn't maintain its original shape any more. The emergence rate of rice was the lowest in Safer-mat treatment. In Lawn-mat treatment, which was the most effective for rice emergence in the first study, the differences of emergence and seedling establishment of rice depending on the seeding position (upper, beneath, and between mats) treatments were negligible, while they were higher in dry seeds than in pre-germinated seeds treatment. The emergence as affected by the kinds of mat also showed the same trend when tested using barnyard grass. Depending on the kinds of mat, the inhibition effect of weeds was the greatest in Safer-mat and the poorest in Lawn-mat. These results strongly suggest the possibility that the uniform seedling establishment and weed management without chemical could be achieved simultaneously by seed-mat mulching through the combination of effective mat for the emergence of rice and another efficient mat for the inhibition of weed occurrence. This possibility was also tested in the field.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.3
• /
• pp.18-23
• /
• 1998

This paper describes a research work of developing a computer-aided design of blanking and piercing for irregular-shaped sheet metal products. An approach to the CAD system is based on the knowledge-based rules. Knowledge for the CAD system is formulated from plasticity theories, experimental results and the empirical knowledge of field experts. The system has been written in AutoLISP on the AutoCAD with a personal computer and is composed of four main modules, which are input and shape treatment, flat pattern layout, production feasibility check, and strip layout module. Based on knowledge-based rules, the system is designed by considering several factors, such as radius and angle of bend. material and thickness of product, complexities of blank geometry and punch profile, and availability of press. This system is capable of unfolding a formed sheet metal part to give flat pattern and automatically account for the adjustment of bend allowances to match tooling requirements by checking the dimensions and relationships of parts of the folded product. Also this system can carry out a process planning which is obtained from results of irregular shape of product that was successful in production feasibility check module according to flat pattern layout and generate strip layout drawing in graphic forms. The developed system provides its efficiency for flat pattern layout, and strip layout for the irregularly shaped sheet metal products.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.11
• /
• pp.174-182
• /
• 1999

This paper describes a research work of developing a computer-aided design of product with bending constraints and piercing for progressive working. an approach to the CAD system is based on the knowledge-based rules. Knowledge for the CAD system is formulated from plasticity theories, experimental results and the empirical knowledge of field experts. The system has been written AutoLISP on the AutoCAD with a personal computer and is composed of four main modules, which are input and shape treatment, flat pattern layout, production feasibility check, and strip-layout module. Based on knowledge-based rules, the system is designed by considering several factors, such as radius and angle of bend, material and thickness of product, complexities of blank geometry and punch profile, bending sequence, availability of press. Strip layout drawing generated by piercing with punch profiles divide into automatically for external area is shown into graphic forms, including bending sequences for the product with piercing and bending constraints. Results obtained using the modules enable the designer and manufacturer of piercing and bending dies to be more efficient in this field.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.636-640
• /
• 2003

As industrial technology was developed, necessity for small size motor was increased on various fields such as medical treatment and robotics. The motor should be simple structure, and it has easy process of manufacture to overcome the limit of miniaturization. So, "the windmill type ultrasonic motor" is enough to satisfy these conditions. In this paper, windmill type ultrasonic motor which was proposed by B.Koc and K.Uchino, was analyzed and fabricated with modified endcap shape. Displacements of arms of the proposed endcap were compared with the previous endcap, using the finite element analysis program (ANSYS). Better rotational characteristics was expected in proposed model as result of FEA. Experimentally, rotary motors of 3.5 [cm] diameter were fabricated, and the speed and torque of the motor were measured. As a result, speed and torque were changed in proportion to the electrical input voltages. And low efficiency which was different from an expectation was obtained in this motor. So, various problems should be improved for practical use.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.9 s.174
• /
• pp.137-146
• /
• 2005

This paper describes a research work to develop a computer-aided design for the product made by progressive working of bending and piercing. An approach to the system for progressive working is based on the knowledge-based rules. Knowledge for the system is formulated from plasticity theories, experimental results and the empirical knowledge of field experts. The system has been written in AutoLISP on the AutoCAD with a personal computer and is composed of three main modules, which are input and shape treatment, flat pattern layout, strip layout modules. The system is designed by considering several factors, such as piercing and bending sequences by fuzzy set theory, complexities of blank geometry, punch profiles, and the availability of a press equipment. Strip layout drawing generated in the strip layout module is presented in 3-D graphic forms, including piercing and bending sequences with punch profiles divided into for external area. Results obtained using the modules enable the manufacturer for progressive working of electric products to be more efficient in this field.