• Journal of Electrical Engineering and Technology
• /
• 제8권5호
• /
• pp.1122-1130
• /
• 2013

This paper proposes a new design for quick battery charger systems for electric vehicles that consists of a three-phase inverter and a full-bridge converter which use the phase-shift method. The 3-phase inverter controls the input and DC-link voltage by use of a current controller and a voltage controller. The full-bridge converter transfers the DC-link voltage to a fixed output voltage. Designs for the output-side converter and controller for improved performance are proposed in this paper. Design schemes for the filter and controller of an input-side inverter are also presented. Furthermore, the paper proposes a compensation method for the offset current that is caused by switch failure and circuit problems. Simulations and experiments have been performed on a 50kW-battery charger system that is suitable for vehicles. The presented results verify the validity of the proposed method and the superiority of the system over conventional methods.

• 한국콘텐츠학회논문지
• /
• 제4권4호
• /
• pp.205-213
• /
• 2004

본 논문에서는 크기 불변 패턴인식을 위하여 광 웨이브렛 PO-fSDF(WPOfSDF) 필터 및 개선된 필터 합성알고리듬을 제안하였다. 제안한 필터는 크기가 변화된 영상을 학습영상으로 사용하여 PO-fSDF로 합성한 후 입력을 위한 웨이브렛 함수를 필터에 곱하여 합성한다. 컴퓨터 모의실험을 통하여 제안된 필터가 크기불변 인식을 할 수 있고, 잡음을 가지는 입력영상의 경우 SNR이 개선되며 필터합성시 반복횟수도 줄어듦을 확인할 수 있었다. 그리고 광실험시 발생하는 광축정렬 문제는 전체 시스템을 FSJTC로 구성함으로써 해결하였다.

• 전자공학회논문지D
• /
• 제34D권11호
• /
• pp.64-69
• /
• 1997

We have shown that the Hough transform filter can be easily obtained by repeatedly recording one line segment pattern holographically by use of rotational multiplexing. With this filter, one can get resutls of the hough transform in the time of light propagation. To demonstrate our method experimentally, the hough transform filter for 18 different rottion angles was recorded, and experimental transform results were compared with simulated ones for a few input patterns. By introducing a compensation process for the non-uniformity of both the input plane wav eand the diffraction efficiency of each hologram. It is possible to get more precise transform results.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 1995년도 학술대회
• /
• pp.165-170
• /
• 1995

In this paper, it is attempted to apply the adaptive digital signal processing to compensate for a linear distortion of a loudspeaker and implement a real time hardware for that purpose. The real time system is implemented by using the DSP56001, a general purpose signal processor, as a host processor and the DSP56200, a cascadable adaptive FIR filter peripheral chip, as an adaptive digital filter. The system has 1000 taps at a 44.1kHz. After inverse modeling of under_compensation_speaker, the system reduces loudspeaker's linear distortions by pre-processing an input audio signal to loudspeaker. The experiment shows satisfactory results; after adaption with white noise as input signal for 60sec, the flat amplitude and linear phase frequency characteristics is found to lie over a wide frequency range of 100Hz to 20kHz.

• International Journal of Control, Automation, and Systems
• /
• 제4권5호
• /
• pp.529-538
• /
• 2006

Separating a reentry vehicle into warhead and body is a conventional and efficient means of producing a huge decoy and increasing the kinetic energy of the warhead. This procedure causes the radar to track the body, whose radar cross section is larger, and ignore the warhead, which is the most important part of the reentry vehicle. However, the procedure is difficult to perform using standard tracking criteria. This study presents a novel tracking algorithm by integrating input estimation and modified probabilistic data association filter to solve this difficulty in a clear environment. The proposed algorithm with a new defined association probability in this filter provides a good tracking capability for the warhead ignoring the radar cross section. The simulation results indicate that the errors between the estimated and the warhead trajectories are reduced to a small interval in a short time. Therefore, the radar can produce a beam to illuminate to the right area and keep tracking the warhead all the way. In conclusion, this algorithm is worthy of further study and application.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제11권4호
• /
• pp.309-317
• /
• 2011

This paper describes a baseband analog (BBA) chain for wireless local area network (WLAN) applications. For the given specifications of the receiver BBA chain, the optimum allocation of the gain and filter rejection of each block in a BBA chain is achieved to maximize the SFDR. The fully integrated BBA chain is fabricated in 0.13 ${\mu}m$ CMOS technology. An input-referred third-order intercept point (IIP3) of 22.9 dBm at a gain of 0.5 dB and an input-referred noise voltage (IRN) of 32.2 nV/${\surd}$Hz at a gain of 63.3 dB are obtained. By optimizing the allocation of the gain and filter rejection using the proposed design methodology, an excellent SFDR performance of 63.9 dB is achieved with a power consumption of 12 mW.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 A
• /
• pp.268-270
• /
• 1995

This paper proposes a novel PWM technique for a three phase current fad type converters. A minor loop compensation method is introduced to compensate leading current and to minimize input line current (Iu) distortion resulting from the resonance between AC filter capacitor and source inductance of power system. This PWM converter has excellent characterics as next. The control system is simply designed, and the operation with unity power factor can be easily obtained by automatic compensating the leading current of the filter circuit. Also. the three phase sinusoidal input current can be obtained.

• ETRI Journal
• /
• 제35권5호
• /
• pp.819-826
• /
• 2013

A class-D audio amplifier for a digital hearing aid is described. The class-D amplifier operates with a pulse-code modulated (PCM) digital input and consists of an interpolation filter, a digital sigma-delta modulator (SDM), and an analog SDM, along with an H-bridge power switch. The noise of the power switch is suppressed by feeding it back to the input of the analog SDM. The interpolation filter removes the unwanted image tones of the PCM input, improving the linearity and power efficiency. The class-D amplifier is implemented in a 0.13-${\mu}m$ CMOS process. The maximum output power delivered to the receiver (speaker) is 1.19 mW. The measured total harmonic distortion plus noise is 0.015%, and the dynamic range is 86.0 dB. The class-D amplifier consumes 304 ${\mu}W$ from a 1.2-V power supply.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.217-221
• /
• 2001

This paper presents a new prototype of soft-switching DC-DC power converter with a high frequency transformer link which has two active power controlled switches in full bridge rectifier with capacitor input type smoothing filter. In this DC-DC converter, ZVS of the inverter in transformer primary side and ZCS of active rectifier area in secondary side can be completely achieved by taking advantage of parasitic inductor component of high-frequency transformer and loss less snubbing capacitors. Its operation principle and salient features are described. The steady-state operating characteristics of the proposed DC-DC power converter are illustrated and discussed on the basis of the simulation results in addition to the experimental ones obtained by 2kw-40kHz power converter breadboard set up.

• 한국컴퓨터정보학회논문지
• /
• 제8권3호
• /
• pp.94-99
• /
• 2003

본 논문에서는 자동 지문 인식 시스템을 구성하기 위하여 MSF에서 위상 신호만으로 상관이 가능한 POC를 기본 시스템으로 하여, 입력 지문 영상에서 위상 신호를 추출하고 기준 지문 영상의 순환 고조파 필터와 2차원 위상 신호 정합을 시키는 방법을 통해 회전 불변 지문 인식 시스템을 구현하였다. 지문 영상은 내부 전반사 모드로 동작하는 프리즘을 통해 얻고, 지문 영상에 대한 2차원 주파수 발생은 광학적으로 수행하고 위상 신호 추출은 디지털 시스템을 이용하는 광-디지털 하이브리드 형태로 광학의 실시간 병렬 처리 특성과 디지털 알고리즘의 유연성 및 정확성을 상호 보완적으로 이용하였다.