• Journal of the Korean Applied Science and Technology
• /
• v.32 no.1
• /
• pp.116-126
• /
• 2015

The present study utilized a shuttle mechanism of wet chemical absorption using MEA. In addition, industrial by-products containing a large amount of inorganic alkali substances were utilized for wet carbonization process. Chemical pretreatment of industrial by-products extracted calcium ions. ICP result of calcium ion was obtained up to 17,900 ppm(17.9%) by acidic substance. And also, In this work, 94% of recovery rate was obtained using wet MEA absorption process from $CO_2$ flow at the ambient condition. Through the liquid carbonation process, a sludge was fixed with rate of 0.175 mg of $CO_2$ per mg of sludge. It was found from XRD results that the structure of final product was composed of a calcite structure which is general structure of $CaCO_3$.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.1 no.1
• /
• pp.1-7
• /
• 2013

This study was on leaching test(KSLT, TCLP) of the aggregate for the products(RA-1) and for the site(RA-2) to evaluate the characteristics of contaminants and the possibility of contamination arising from the aggregate. On the basis pH, conductivity and heavy metal contents in the aggregate, RA-1 indicated higher than RA-2. As a result of the leaching test, the pollutants were eluted from the aggregate increased as the particle size of the aggregate was smaller. The pH in the aggregate had a strong alkali by a pH value of 9.0~12.3, the conductivity was higher in less than 10mm RA-1 due to the leaching of dissolved inorganic ions. The heavy metals satisfied the leaching standards of KSLT and less 10% was eluted from the aggregate. As a result of evaluating water pollution possibility of the aggregate, the pH displayed in items with a very high possibility of contamination, conductivity and turbidity did in item with a low possibility of contamination and on the other hand the heavy metals did in item with a very low possibility of contamination.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.39 no.3
• /
• pp.278-282
• /
• 2006

The powdered boil-dried oyster (C), the powdered smoke-dried oyster (OS-1) and the powdered smoke-dried oyster scrap (OS-2) were examined for their taste-active components, quality characteristics for potential utilization as a natural flavoring substance. The free amino acid level of OS-l and OS-2 were 395.6 mg/100 g and 551.5 mg/100 g, respectively, and that of betaine of OS-1 and OS-2 were 164.6 mg/100 g and 214.9 mg/100 g, respectively. The contents of inorganic ions were rich in Na, K, P, Ca and Mg in that order. Major free amino acids were taurine, glutamic acid, proline, alanine and glycine. The extract condition of the OS-1 and OS-2 the instant soup was the most appropriate at $98^{\circ}C$ for 1-5 min. The hot water extract of OS-1 and OS-2 with additives such as salt, sugar, pepper and onion powder had a good organoleptic qualities compared with the conventional flavoring substances in a local market. We conclude that powdered smoke-dried oyster and its scrap can be commercialized.

• Microbiology and Biotechnology Letters
• /
• v.9 no.3
• /
• pp.145-152
• /
• 1981

Microorganisms from the waste water of starch industry, were isolated and a strain, Y-124, possessing a powerful enzymic activity was selected and identified as a member of the genus Bacillus. The ideal cultural condition for the formation of $\alpha$-amylase form Bacillus Y-124 and its preservation was investigated in connection with the biotechnological and industrial approach to the bulk enzyme production. High yield of $\alpha$-amylase was observed in medium containing casein as well as calcium pantothenate in this work. Calcium ions were found to have an effect in forming this particular enzyme. Ammonium phosphate dibasic was an important inorganic nitrogen source for the formation of $\alpha$-amylase. And preservation of this enzyme was greatly affected by calcium or sodium salts. The addition of calcium carbonate or sodium sulfate presented the most effective result for the prevention of its denaturation to various factors. The above data was obtained with crude enzyme preparation.

• The Journal of Engineering Geology
• /
• v.24 no.4
• /
• pp.583-595
• /
• 2014

The chemical properties and composition (pH, CaO, Fe, $HCO{_3}^-$, and $SO{_4}^{2-}$) of groundwater (GW) and surface water (SW) from the northern (non-carbonate bedrock) and southern (carbonate bedrock) sections of the Daedong River, Pyeongyang were analyzed and compared period of the 1930s. In the southern section, the GW and SW has a higher pH and $SO{_4}^{2-}$ concentration, but lower $HCO{_3}^-$ and Fe levels than in the north. This finding reflects a reaction that formed acid by replacing metal ions in inorganic salts by hydrogen, which resulted from the oxidation of organic material in a clay layer.

• Applied Chemistry for Engineering
• /
• v.3 no.2
• /
• pp.349-359
• /
• 1992

Studies were carried out on the selective removal of inorganic salts such as NaCl and $Na_2SO_4$ from dye solution, using counter diffusion-reverse osmosis and nanofiltration, respectivey. For the dye solution used in the experiments, 1 to 30% of salts were removed by counter diffusion while the loss of dye molecules was less than 0.3%. The separation factors by one pass operation were 10-500 according to ionic species. In five successive operations, removals of anion($Cl^-$) increased but those of cation($Na^+$) decreased due to the Donnan effect. Effects of feed flow rate on removal efficiencies of various ions were also observed at constant flow rate of stripping water. Reverse osmosis of desalted dye solution by counter diffusion was conducted to prepare highly concentrated liquid dyes. The rejection efficiency of dye molecules was greater than 99%. For the rejection efficiency of chloride ion, experimental values were compared with theoretical ones based on solution-diffusion model. Two stage diafiltration was performed in nanofiltration. The rejection efficiency of chloride ion was continuously decreased due to the Donnan dialysis and even negative rejection was observed. The Donnan effect was more pronounced in the second diafiltration.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.2
• /
• pp.70-79
• /
• 2015

This study was carried out to analyze deterioration characteristics of color-pigments painted Hanji to preserve and restore the cultural properties. On the traditional painting technique, glue was used with pigments in various ways for painting, but it eventually caused the deterioration of paintings. Thus, five colors were selected and analyzed for this study for investigating their characteristics of deteriration. Three kinds of glues (Wugyo, Nokgyo, and Togyo) and two kinds of pigments (Chinese and Gilsang) were painted on the Hanji for the accelerated aging test. And then color fastness of pigments and tensile strength of painted Hanji were measured for the estimation of deterioration degree. The results of SEM-EDS showed that Chinese pigments including blue, yellow, green, and red were composed of inorganic substances but the brown was organic substance. Gilsang pigments were composed mainly of Si and Ti ions. Color fastness of the Gilsang pigment blue, yellow, green, and brown were better than those of Chinese. Chinese pigment brown with organic substance showed the worst color fastness. Generally, Chinese pigments painted Hanji showed higher tensile strength than Gilsang in the accelerated aging test. Hanji treated with Chinese pigment and Nokgyo (antler glue) blends and Gilsang pigment and Togyo (rabbit pelt glue) blends showed higher tensile strength than the others. And Andong Hanji showed the highest tensile strength.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.68-69
• /
• 2011

The process of charge transfer at the interface between two semiconductors or between a metal and a semiconductor plays an important role in many areas of technology. The optimization of such devices requires a good theoretical description of the interfaces involved. This, in turn, has motivated detailed mechanistic studies of interfacial charge-transfer reactions at metal/organic, organic/organic, and organic/inorganic semiconductor heterojunctions. Charge recombination of photo-induced electron with redox species such as oxidized dyes or triiodide or cationic HTM (hole transporting materials) at the heterogeneous interface of $TiO_2$ is one of main loss factors in liquid junction DSSCs or solid-state DSSCs, respectively. Among the attempts to prevent recombination reactions such as insulating thin layer and lithium ions-doped hole transport materials and introduction of co-adsorbents, although co-adsorbents retard the recombination reactions as hydrophobic energy barriers, little attention has been focused on the anchoring processes. Molecular engineering of heterogeneous interfaces by employing several co-adsorbents with different properties altered the surface properties of $TiO_2$ electrodes, resulting to the improved power conversion efficiency and long-term stability of the DSSCs. In this talk, advantages of the coadsorbent-assisted sensitization of N719 in preparation of DSSCs will be discussed.

• KSBB Journal
• /
• v.20 no.5 s.94
• /
• pp.350-354
• /
• 2005

In order to maximize hydrogen production by Enterobacter cloacae YJ-1, anaerobic hydrogen producing bacteria, the medium composition was optimized. Glucose was better than other carbon sources in hydrogen production and its production was 975.4 mL/L at $2\%$ (w/v) for 48 h. Organic nitrogen sources were more effective than inorganic nitrogen sources and also yeast extract among organic nitrogens was the most effective in hydrogen production. Among metal ions, $Na_2MoO_4$ was most effective, and its production was 1753.3mL/L at $0.04\%$ (w/v). Addition of amino acid was very effective with compare to another components of medium, and cystein was most effective among them. Under the optimum medium obtained in batch culture, semi-batch culture in order to produce continuous hydrogen was run. The highest hydrogen production was earned at $3\%$(w/v) of glucose and the amount was 2215.4 mL/L.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.11
• /
• pp.3109-3114
• /
• 2010

Flexible composite films of $V_2O_5$ and conductive polypyrrole ($V_2O_5$/PPy) were grown by facile electrochemical polymerization, wherein an anodization potential was applied to the substrate electrode in an electrolyte solution containing pyrrole monomer and dispersed $V_2O_5$ particles. The coating of polypyrrole (PPy) on the surface of $V_2O_5$ particles was induced by the oxidative catalytic action of $V_2O_5$ during the electrochemical polymerization of pyrrole. PPy in the composite film connects the isolated $V_2O_5$ particles. This results in the formation of conductive networks in the composite film cathode, thereby enhancing the Li+ ion diffusion to the surface of the isolated $V_2O_5$ particles and thus increasing the accessibility of the $Li^+$ ions. The specific capacity tests of the Li rechargeable batteries revealed that the discharge capacity of this composite film cathode was higher, i.e., $497\;mAhg^{-1}$, than that of $V_2O_5$/PPy powder or pristine $V_2O_5$.