• Journal of Korean Society of Water and Wastewater
• /
• v.21 no.5
• /
• pp.559-569
• /
• 2007

The purposes of this study were to find the main foulant of membrane and the optimal chemical cleaning method for MF(microfiltration) drinking water treatment system using D dam water as water source. The MF pilot plant which can treat maximum $500m^3/d$ consisted of 3 racks and was operated for 10 months under various operation conditions. After 10 months operation, $1^{st}$ and $2^{nd}$ rack of membrane pilot plant system were cleaned chemically and the degree of the restoration of the fouled membrane in terms of the pure water flux was detemnined. Inorganic compounds which contained in chemical cleaning waste was analyzed by Inductively Coupled Plasma (ICP). One membrane module for 3rd rack was disjointed and membrane fouling materials, especially inorganic compounds were investigated by Electron Probe Microanlysis (EPMA) to elucidate the reason of TMP increase. And also, the various chemical reagents (1N HCl or $H_2SO_4$, oxalic acid as acid and 0.3% NaOCl as alkali) were tested by combination of acid and alkali to determine the optimal chemical cleaning method for the MF system using micro-modules manufactured using the disjointed module. It was verified that the inside and outside of membrane module was colorized with black. As a result of the quantitative and semi-qualitative analysis of membrane foulant by ICP, most of inorganic foulant was manganese which is hard to remove by inorganic acid such as HCI. Especially, it was observed by EPMA that Mn was attached more seriously in inside surface of membrane than in outside surface of that. It was supposed that Mn fouling in inside surface of membrane might be caused by the oxidation of soluble manganese (Mn(II)) to insoluble manganese ($MnO_2$) by chlorine containing in backwashing water. The optimal cleaning method for the removal of manganese fouling was consecutive cleaning with the mixture of 1N HCl and 1% of oxalic acid, 0.3% NaOCl, and 1N HCl showing 91% of the restoration of the fouled membrane.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.16 no.1
• /
• pp.25-35
• /
• 2013

Dominance and survival strategy of toxic dinoflagellate Alexandrium tamarense and A. catenella under the dissolved inorganic nitrogen (DIN) limited conditions were examined in the laboratory and field observations. In Masan Bay, DIN was limiting factor for growth of phytoplankton during spring to early summer when Alexandrium spp. have been observed. They have a disadvantageous position compared with diatoms because Ks of nitrate calculated from growth kinetics experiment of A. tamarense and A. catenella was higher than diatoms. However, A. tamarense and A. catenella were able to grow using dissolved organic nitrogen (DON) compounds such as urea and amino acids as well as DIN. Therefore, DON utilization of A. tamarense, A. catenella might contribute to not only their population growth but also dominance and interspecific competition in the DIN-limited conditions in Masan Bay.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.46-52
• /
• 2007

As flue gas desulfurization (FGD) wastewater contains high concentrations of nitrate and is very low in organic carbon, the feasibility of nitrate removal by autotrophic denitrification using Thiobacillus denitrificans was studied. This autotrophic bacteria oxidizes elemental sulfur to sulfate while reducing nitrate to elemental nitrogen gas, thereby eliminating the need for addition of organic compounds such as methanol. Owing to the unusually high concentrations of dissolved salts $(Ca^{2+},\;Mg^{2+},\;Na^+,\;K^+,\;B^+,\;SO_4^{2-},\;Cl^-,\;F^-,)$ in the FGD wastewater, extensive laboratory-scale and pilot-scale tests were carried out in sulfur-limestone reactors (1) to determine the effect of salinity on autotrophic denitrification, (2) to evaluate the use of limestone for pH control and as source of inorganic carbon for microbial growth, and, (3) to find the optimum environmental and operational conditions for autotrophic denitrification of FGD wastewater. The experimental results demonstrated that (1) autotrophic denitrification is not inhibited up to 1.8 mol total dissolved salt content; (2) inorganic carbon and inorganic phosphorus must be present in sufficiently high concentrations; (3) limestone can supply effective buffering capacity and inorganic carbon; (4) the high calcium concentration may interfere with pH control, phosphorus solubility and limestone dissolution, hence requiring pretreatment of the FGD wastewater; and, 5) under optimum conditions, complete autotrophic denitrification of FGD wastewater was obtained in a sulfur-limestone packed bed reactor with a sulfur:limestone volume ratio of 2:1 for volumetric loading rates up to 400g $NO_{3^-}N/m^3.d$. The interesting interactions between autotrophic denitrification, pH, alkalinity, and the unusually high calcium and boron content of the FGD wastewater are highlighted. The engineering significance of the results is discussed.

• Journal of Adhesion and Interface
• /
• v.14 no.1
• /
• pp.28-35
• /
• 2013

In this study, we produced heat-shield coating materials using surface-treated Ga-doped ZnO (GZO) and investigated the dispersity of particle, visible light transmittance, ultraviolet light cut off, infrared light cut-off, heat-shielding property by surface-treating compounds and treatment conditions. In the case of using IPA or acryl binder for heat-shield coating, the dispersity of inorganic oxide particles was poor but in the case of using surface-treated inorganic oxide particles by hybrid compound having urethane (urea) group, acryl group and silica, dispersity of particle, visible light transmittance and haze were improved. We used the measurement kit and sunlamp for measuring heat-shielding property and confirmed that the internal temperature of the measurement kit using heat-shield film was lower more than $4.8^{\circ}C$ in comparison with using PET film for itself.

• Applied Chemistry for Engineering
• /
• v.22 no.2
• /
• pp.230-234
• /
• 2011

In this work, the primary material for a single layered hardmask which can afford a spin-on process was prepared by the minture of organic and inorganic sources. The preparation of hybrid polymer was attempted by esterification from silanol terminated siloxane compounds and acetonide-2,2-bis(methoxy)propionic acid. The optical, thermal and morphological properties of the test hardmask film was examined in terms of cross-linking agent and additives. In addition, the etch rate of hardmask film and photo resist layer were compared. The hybrid polymer prepared from organic and inorganic materials was found to be useful for hardmask film to form the nano-patterns.

• 한국문화재보존과학회:학술대회논문집
• /
• 2007.05a
• /
• pp.67-68
• /
• 2007

Tetraethyl orthosilicate (TEOS)로 형성된 gel의 film 형성 특성을 증가시키기 위하여 (3-glycidyloxypropyl)trimethoxysilane (GPTMS)와 1,2-bis(triethoxysilyl)ethane (BTEOS)를 추가한 유기-무기 복합 용액을 제조하였다. 화강암과 사암에 적용한 후, 접촉 각 및 고형화 시간, silicate의 함유량, 수분 흡수율 및 석재에 적용되었을 때의 공극률 변화를 측정하여 silicate를 기본으로 하는 복합제의 특성을 분석하였다.

• Journal of Environmental Science International
• /
• v.8 no.2
• /
• pp.233-240
• /
• 1999

Industrial waste which highly loaded by halogenide phenols was photooxidized by laboratory-scale photooxidation of these organic impurities in the presence of aerotropic and titaniumdioxide as photocatalyst. The disapperance of organic compounds was determined as a function of the irradiation time. Some contaminants such as 2-chlorophenol, 2-bromphenol, 3-bromphenol, 4-bromphenol, 2,4-dibromophenol and 2,6-dibromophenol were photodegraded separately to obtain information on the reaction rates, reactivities, and reaction mechanisms of the photooxidation, and on the stoichiometric correlation between organic reactant and inorganic products concentration in the course of the photocatalytic photoreaction.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 1999.04a
• /
• pp.18-20
• /
• 1999

• Korean Journal of Microbiology
• /
• v.24 no.1
• /
• pp.32-37
• /
• 1986

In fermentation studies it revealed that Streptomyces sp. SMF 3001 started to synthesize extracellular alkaline protease from early exponential phase of cell growth. The biosynthesis of the alkaline protease was greatly induced by skim milk as a sola nitrogen source and further stimulation was observed under inorganic sulphur limited culture. However, it was found that the biosynthesis was apparently repressed by $NH_4^+$ and free amino acids, specially by cysteine. It was considered that the strain SMF 301 of Streptomyces sp. would produce the alkaline protease for the uptake of sulphur compounds from protein contained in the culture broth.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.09a
• /
• pp.176-179
• /
• 2003

The objective of this study was to investigate reductive dechlorination of aromatic hydrocarbons using zero valent metals (ZVMs) and catalysts as reactive materials for permeable reactive barriers (PRBs). A group of small aromatic hydrocarbons such as monochlorophenols, phenol, benzene were readily reduced with palladium catalyst and zero valent iron. Poly-aromatic hydrocarbons (PAHs) were also tested with the catalysts and zero valent metal combinations. The aromatic rings were reduced and partly reduced PAHs were found as the daughter compounds. Current preliminary study implicate that ZVMs and modified catalysts can be successfully applied for PRBs which currently applicable for halogenated organic compounds and some inorganic contaminants including chromium(Ⅵ) and nitrate.