• Microbiology and Biotechnology Letters
• /
• v.27 no.5
• /
• pp.378-384
• /
• 1999

Protopectinase (PPases) are heterologous group of enzymes that degrade pectin from the insoluble protopection which is constituent of the middle lamella and primary cell wall of higher plants by restricted depolymerization. From the previous report[6], enzymatically separated plant cells, which are produced from plant tissues by PPases treatment, showed well-conserved cellular components with their rigid cell wall and this characteristic is applicable to preparation of novel food material. The purpose of this study is to investigate the effect of medium composition of PPase production from Bacillus subtilis EK11 which was selected as a PPase producer. Various carbon sources and concentrations on PPase production were studied and corn starch at 0.7% was the most effective for production of PPase. Among the nitrogen sources, yeast extract was the most effective for PPase production and the effect of (NH4)2SO4 was notable as inotganic nitrogen source. Inorganic compounds such as KH2PO4, K2HPO4, Na3-citrate.2H2O and MgSO4 were optimized for PPase production. PPase activity was inhibited by the adition of Ba2+ or Zn2+. The optimal medium for PPase production was devised: 0.7% corn starch, 0.3% yeast extract, 1.4% KH2PO4, 0.6% K2HPO4, 0.1% Na3-citrate.2H2O and 0.02% MgSO4. PPase production by using the optimum medium was carried out with shaking cultivation at 37$^{\circ}C$. The maximum PPase activity of 256unit/ml could be obtained after the cultivation for 48hrs. The activity was increased about 2.2timesthan the activity, 112 unit/ml, in basal medium.

• Journal of Electrochemical Science and Technology
• /
• v.8 no.3
• /
• pp.183-196
• /
• 2017

The research efforts directed at advancing water electrolysis technology continue to intensify together with the increasing interest in hydrogen as an alternative source of energy to fossil fuels. Among the various water electrolysis systems reported to date, systems employing a solid polymer electrolyte membrane are known to display both improved safety and efficiency as a result of enhanced separation of products: hydrogen and oxygen. Conducting water electrolysis in an alkaline medium lowers the system cost by allowing non-platinum group metals to be used as catalysts for the complex multi-electron transfer reactions involved in water electrolysis, namely the hydrogen and oxygen evolution reactions (HER and OER, respectively). We briefly review the anion exchange membranes (AEMs) and electrocatalysts developed and applied thus far in alkaline AEM water electrolysis (AEMWE) devices. Testing the developed components in AEMWE cells is a key step in maximizing the device performance since cell performance depends strongly on the structure of the electrodes containing the HER and OER catalysts and the polymer membrane under specific cell operating conditions. In this review, we discuss the properties of reported AEMs that have been used to fabricate membrane-electrode assemblies for AEMWE cells, including membranes based on polysulfone, poly(2,6-dimethyl-p-phylene) oxide, polybenzimidazole, and inorganic composite materials. The activities and stabilities of tertiary metal oxides, metal carbon composites, and ultra-low Pt-loading electrodes toward OER and HER in AEMWE cells are also described.

• Applied Biological Chemistry
• /
• v.34 no.4
• /
• pp.327-333
• /
• 1991

This study was carried out to determine the effects of media compositions on cell growth and casein hydrolysis for cell production in order to add Micrococcus sp. LL3 as a potential agent for industrial application for the shortening of ripening period. Monosaccharides like glucose, mannose and fructose were mare excellent as carbon source, but arabinose and xylose markedly inhibited cell growth and caseinolysis. Among the organic nutrients, yeast extract was more effective for cell growth and for caseolysis. However, inorganic nitrogen sources were less effective than organic sources. Urea inhibited cell growth severely. Cell growth and caseinolysis were rather increased a little in the broth containing 1% NaCl, and the organism tolerated and grew in relatively high concentrations of NaCl up to 9%. Addition of vitamin did not affect cell growth and caseolysis in level of $0.1\;{\mu}g/ml$ concentration. Cell growth and caseinolysis were stimulated by addition of glutamic acid and $MgSO_4$ with concentration of 0.2% and 0.05% respectively.

• KSBB Journal
• /
• v.23 no.6
• /
• pp.484-488
• /
• 2008

Chlorinated phenols are widely used by the chemical industry as intermediate products in synthesis and previously were frequently applied to various industry fields. Peroxidases catalyze the peroxide-dependent oxidation of a range of inorganic and organic compounds. Peroxidase was shown to mineralize a variety of recalcitrant aromatic compounds and to oxidize a number of polycyclic aromatic and phenolic compounds. Among monomeric phenolic and nonphenolic compounds, peroxidase is known to oxidize its compounds. In this study, a colorimetric assay was developed to quantitatively evaluate the peroxidase activity for rapid screening. Color products of different intensity were developed proportionally to the peroxidase activity on agar plate and 96-well plate. This method correlates well with the RP-HPLC result. Using this screening method, 12 colonies of strain was screened which survived at high concentration of 2,4-DCP (1000 ppm) and with peroxidase activity for the $7^{th}$ round screening step on agar plate. These strains were utilized 2,4-DCP as a sole carbon source and produced peroxidase. After the screening test, four of the bacteria have significant better effect of COD removal on dye waste-water. COD removal of these was from 44% to 61%, respectively.

• Applied Biological Chemistry
• /
• v.23 no.4
• /
• pp.211-217
• /
• 1980

Using Streptomyces chibaensis, which produces a strong inulin-hydrolyzing enzyme, the optimum cultural conditions and composition of the medium for the production of inulase were studied. 1. The highest enzyme activity was obtained at pH 7.5 after 84 hours culture at $30^{\circ}C$. 2. None of carbon source better than inulin was found. 3. $(NH_4)_2HPO_4$ and corn steep liquor were favourable inorganic and organic nitrogen sources for the production of inulase. 4. $KCl,\;MgSO_4\;and\;FeSO_4$ as the metallic salts were effective for the enzyme production at their concentrations of 0.01, 0.05 and 0.0001%, respectively. 5. The highest production of inulase was obtained from the medium of inulin 1.0% and corn steep liquor 2.0% concentrations, respectively.

• Microbiology and Biotechnology Letters
• /
• v.17 no.4
• /
• pp.397-402
• /
• 1989

A new extracellular biopolymer was produced by Methylobacterium organophilum from methanol as a sole carbon and energy source. The purified biopolymer was found to have a high molecular weight of about 4-5$\times$10$^6$ dalton and contained 66% (w/w) of carbohydrate but no polyhydro xybutyrate. Other organic constituents were consisted of protein, pyruvic acid, uronic acid, and acetic acid, whereas content of inorganic ash was 22%. Based on the chemical analysis of the biopolymer by TLC method, the polymer was consisted of glucose, galactose, and mannose with an approximate molar ratio of 2:3:2. The biopolymer solution showed a characteristics of pseudoplastic non-Newtonian fluid. The viscosity of the 1%-biopolymer solution was found to be 18,000 cp at a shear rate, 1 sec$^{-1}$, which was almost 10 times higher than that of a commercial xanthan gum.

• Applied Chemistry for Engineering
• /
• v.34 no.5
• /
• pp.541-547
• /
• 2023

The effect of temperature and influent alkalinity/ammonia (K/A) ratio on the start-up of the partial nitrification (PN) process for an activated sludge-based domestic wastewater treatment was studied. Two different sequence batch reactors (SBR) were operated at 26 ℃ and 32 ℃. The relationship between temperature and the concentration of free ammonia (FA) and free acid nitrite (FNA) was investigated. A stable PN process was achieved in the 32 ℃ reactor when the influent ammonium concentration was lower than 150 mg-N/L. In contrast, the PN process in the 26 ℃ reactor had a higher nitrite accumulation rate (NAR) and ammonium removal efficiency (ARE) when the influent ammonia concentration was increased to more than 150 mg-N/L. Then three different ranges of the K/A ratio were applied to an SBR reactor. In the K/A range of 2.48~1.65, the SBR reactor achieved the highest NAR ratio (75.78%). This ratio helps to achieve the appropriate level of alkalinity to maintain a stable pH and provide a sufficient amount of inorganic carbon source for the activity of microorganisms. At the same time, FA and FNA values also reached the threshold to inhibit nitrite-oxidizing bacteria (NOB) without a significant effect on ammonia-oxidizing bacteria (AOB). Results showed that the control of temperature and K/A ratio during the start-up period may be important in establishing a stable and steady PN process for the treatment of domestic wastewater.

• Journal of the Korean Society of Industry Convergence
• /
• v.27 no.3
• /
• pp.685-692
• /
• 2024

Currently used heating elements are metal and non-metal heating elements, including various types of heaters, and resistance line heating elements have a problem of decreasing thermal efficiency over time, so to solve this problem, a planar heating element using high-purity carbon materials and oxidation-resistant inorganic compounds was applied. Through the manufacture of planar heating elements using CNT, ruthenium composite materials, and ruthenium oxide, physicochemical performance and capacity were increased, and instantaneous responsiveness was increased. Through thick film technology applicable to various base bodies, fine patterns were formed by the screening method in consideration of the fact that the performance of the heat source depends on the viscosity and pattern shape. The heating element was manufactured by thick film printing technology by mixing ruthenium oxide, CNT, Ag, etc. The characteristics of each paste were analyzed through viscosity measurement, and STS 430 was used as a base. Surface temperature and efficiency were measured by testing heaters manufactured for small wind tunnels and real-vehicle experiments. The surface temperature decreased as the air volume increased, and the optimal system boundary was found to be about 200 mm. Among the currently used heating elements, this paper manufactured a planar heating element using thick film technology to find out the relationship between air volume and temperature, and to study the surface temperature.

• KSBB Journal
• /
• v.11 no.5
• /
• pp.565-571
• /
• 1996

Medium optimization for ${\beta}$-mannanase production by Aspergillus oryzae ATCC 2114 was performed. Effect of carbon source (locust bean gum) concentration on ${\beta}$-mannanase production was investigated. Above 20 g/L locust bean gum, a lag time for ${\beta}$-mannanase production was appeared because high concentration of locust bean gum caused high viscosity which made the mixing of medium poor. As the locust bean gum concentration in the medium increased, ${\beta}$-mannanase activity and cell growth increased proportionally. Effect of various nitrogen sources on ${\beta}$-mannanase production was also studied. (NH4)2SO4 and malt extract were the most effective for ${\beta}$-mannanase production among the inorganic nitrogenous compounds and organic nitrogen nutrients. Inorganic compounds such as KH2SO4, NaCl, Na2CO3, and MgSO4, on ${\beta}$-mannanase production were optimized for ${\beta}$-mannanase production. Locust bean gum of 10 g/L, malt extract of 3 g/L, (NH4)2SO4 of 2 g/L, KH2SO4, of 10 g/L were selected as the optimal medium. Culture in a fermentor by using the optimal medium was carried out. Lag time of ${\beta}$-mannanase production was shorter due to the better mixing of the fermentor. The maximum ${\beta}$- mannanase activity of 9.7 unit/mL and specific ${\beta}$-mannanase activity of 1.9 unit/mg-cell could be obtained at 27 hours and the productivity of ${\beta}$-mannanase was 0.36 unit/mL$.$h.

• Journal of Life Science
• /
• v.21 no.11
• /
• pp.1599-1606
• /
• 2011

To evaluate the effects of microorganism agents on oil biodegradation, treatability and microcosm studies were conducted. Petroleum oil degrading bacteria were isolated from enriched cultures of oil-contaminated sediment samples using a mineral salts medium (MSM) containing 0.5% Arabian heavy crude oil as the sole carbon source. After a 5 day-incubation period using MSM, mixed microorganisms of three species (strains BS1, BS2 and BS4) degraded 48.4% of aliphatic hydrocarbons and 30.5% of aromatic hydrocarbons. Treatability and microcosm tests were performed in the three different treatment conditions (AO: Arabian heavy crude oil, AO+IN: Arabian heavy crude oil+inorganic nutrient, AO+IN+MM: Arabian heavy crude oil+inorganic nutrient+mixed microorganism agents). Among these, significantly enhanced biodegradation of aliphatic hydrocarbons were observed in AO+IN and AO+IN+MM conditions, without showing any different biodegradation rates in either condition. However, the degradation rates of aromatic hydrocarbons in an AO+IN+MM condition were increased by 50% in the treatability test and by 13% in the microcosm test compared to those in an AO+IN condition. Taken together, it can be concluded that mixed microorganism agents enhance the biodegradation of aliphatic and aromatic hydrocarbons in laboratory, a treatability test, and a microcosm test. This agent could especially be a useful tool in the application of bioremediation for removal of aromatic hydrocarbons.