• 멤브레인
• /
• 제23권1호
• /
• pp.80-91
• /
• 2013

$Fe(SO_4)_2$, cyclohexanedione dioxime, phenylboronic acid을 이용하여 금속 템플레이트 중합을 실시한 후 메탄올로 세척하여 Fe(II) clathrochelate 화합물을 합성하였다. Fe(II) clathrochelate와 polyethersulfone을 이용한 유무기 복합 멤브레인을 제조하였다. 멤브레인 제조를 위하여 Fe(II) clathrochelate는 DMF, NMP, DMAC와 같은 멤브레인 제조에 이용되는 극성 아프로틱 용매에 잘 녹는 물질로 고안되었다. Fe(II) clathrochelate는 trifluorosactic acid와 같은 강산 존재하에서도 금속이 분리되지 않고 안정성이 유지되었다. UV-vis 분광법으로 용액 가용성을 확인하였으며 (i) 강산 및 (ii) 경쟁 킬레이트제를 이용하여 용액상의 안정성을 확인하였다. 유무기 복합막은 PES, PVP, TSA, Fe(II) clathrochelate를 DMF에 녹여 NIPS (비용매 유도 상전이) 방법으로 제조하였다. Fe(II) clathrochelate의 첨가는 표면의 기공 밀도의 향상, 평균기공 크기의 증가 및 유량 증가에 영향을 주었으며 상대적으로 비대칭 구조를 가지는 성능이 향상된 멤브레인을 얻을 수 있었다.

• 한국환경과학회지
• /
• 제14권8호
• /
• pp.723-737
• /
• 2005

The effects of pH (5, 7 and 9) and ionic strength of different salts on the flocculation characteristics of humic acid by inorganic (alum, polyaluminum chloride (PAC) with degree of neutralization, r=(OH/Al) of 1.7) and organic (cationic polyelectrolyte) coagulants, have been examined using a simple continuous optical technique, coupled with measurements of zeta potential. The results are compared mainly by the mechanisms of its destabilization and subsequent removal. The destabilization and subsequent removal of humic acid by PAC and cationic polyelectrolyte occur by a simple charge neutralization, regardless of pH of the solution. However, the mechanism of those by alum is greatly dependent on pH and coagulant dosage, i.e., both mechanisms of charge neutralization at lower dosages and sweep flocculation at higher dosages at pH 5, by sweep flocculation mechanism at pH 7, and little flocculation because of electrostatic repulsion between negatively charged humic acid and aluminum species at pH 9. The ionic strength also affects those greatly, mainly based on the charge of salts, and so is more evident for the salts of highly charged cationic species, such as $CaCl_2$ and $MgCI_2.$ However, it is found that the salts have no effect on those at the optimum dosage for alum acting by the mechanism of sweep flocculation at pH 7, regardless of their charge.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제27권5호
• /
• pp.10-17
• /
• 2022

Inorganic acids such as HCl, HNO₃, and H₂SO₄ have been commonly applied to soil washing of heavy metals-contaminated soil due to their cost-effectiveness. However, implementing the 'Chemical Substance Control Act' requires off-site risk assessment of the chemicals used in the soil washing. Therefore, in this study, organic acids or Fe(III)-based washing agents were evaluated to replace commonly used inorganic acids. Ferric removed heavy metals via H⁺ generated by hydrolysis, which is similar to the HCl used in the control group. Oxalic acid and citric acid were effective to remove Cu, Zn, and Cd from soil. Organic acids could not remove Pb because they could form Pb-organic acid complexes with low solubility. Furthermore, Pb could be adsorbed onto the iron-organic acid complex on the soil surface. Ferric could remove exchangeable-carbonate, Fe-Mn hydroxide, and organic matter and sulfides bound heavy metals (F1, F2, and F3). Organic acids could remove the exchangeable-carbonate and Fe-Mn hydroxide bound metals (F1&F2). Therefore, this research shows that the fractionation of heavy metals in the soil and the properties of washing agents should be considered in the selection of agents in the process design.

• Korean Chemical Engineering Research
• /
• 제44권3호
• /
• pp.254-258
• /
• 2006

휘발성 유기화합물을 제거하는 허니콤 흡착제의 제조 성분인 무기질 섬유에 흡착력이 뛰어난 제올라이트를 화학 결합시켰다. 무기질 섬유를 염산, 황산 또는 플루오르화 수소산 등으로 처리하여 표면의 불순물을 제거하여 제올라이트의 접합 능력을 향상시켰다. 무기질 섬유와 제올라이트의 표면에 매달은 클로로프로필, 아미노프로필 또는 에폭시기 등을 서로 반응시켜 두 물질을 화학 결합시켰으며, 연결 화합물로 고분자 폴리에틸렌이민을 사용하기도 하였다. 결합상태는 전자현미경으로 관찰하였고, BET 표면적 분석을 통하여 제올라이트 접합량을 유추하였다. 폴리에틸렌이민을 사용하면 제올라이트를 무기질 섬유에 많이 결합시킬 수 있었다.

• 한국전기전자재료학회논문지
• /
• 제35권2호
• /
• pp.178-183
• /
• 2022

For enhancing the flame-retardant properties of wallpapers, we developed an organic-inorganic hybrid solution with ZrSiO₄ as a functional ceramic powder, coated on non-woven fabric using dip coating, spray coating, and slot-die coating methods. Their flame retardant properties were characterized by a 45° combustion tester, which is manufactured according to the flame-retardant performance standard (KOFEIS 1001 and KS F 2819). In organic-inorganic hybrid solution, with increasing the concentration of acid-catalyst (acetic acid), the precipitation of ZrSiO₄ powders increased, and the flame retardant properties decreased. The highest flame retardant result was obtained for the solution adding 5 wt% acetic acid. The optimization of the coating method and coating number resulted in the most excellent flame-retardant properties being obtained for the non-woven fabric coated for 5 or 7 times by dip coating method, and their flame-retardant properties corresponded to class 2 flame-retardant performance of wallpapers.

• 산업식품공학
• /
• 제14권1호
• /
• pp.65-74
• /
• 2010

파김치에서 분리한 마늘 내성 유산균인 Lactobacillus plantarum TJ-LP-002 균주의 균체생육과 항균활성에 영향을 미치는 배양조건 및 배지조건을 조사하였다. 선정 유산균의 배양 상등액 내에는 acetic acid, citric acid, lactic acid, tartaric acid와 같은 유기산이 존재하였고, 배양 중에 lactic acid와 acetic acid의 생성이 크게 증가하는 것으로 확인되었다. 단백질분해효소를 비롯한 각종 효소 처리에 의해 항균활성이 소실되지 않아, 선정 유산균이 생산하는 항균활성은 단백질성 물질이 아닌 산 생성에 의한 작용일 것으로 판단되었다. 항생제와 생균제의 병용 가능성을 확인하기 위하여 선정 유산균의 항생제 감수성을 조사한 결과, neomycin sulfate, spectinomycin dihydrochloride, lincomycin hydrochloride에 내성을 나타내었고, streptomycin sulfate에는 감수성을 나타내었으며, ampicillin trihydrate, chloramphenicol, erythromycin, tetracycline hydrochloride, kanamycin sulfate에는 중간 내성을 나타내었다. L. plantarum TJ-LP-002는 배양온도 30${^{\circ}C}$, 초기 pH 7.0, 24시간의 배양조건에서 최적의 균체생육과 항균활성을 나타내었으며, 탄소원은 glucose 3%(w/v), 질소원은 yeast extract 3%(w/v) 첨가 시에 균체생육과 항균활성이 높게 나타났다. 무기염류는 manganese sulfate와 ammonium citrate가 항균활성에 많은 영향을 주는 것으로 나타났으며, 각 성분을 단독 첨가하는 것보다 혼합 첨가하는 것이 더 우수한 영향을 나타내는 것으로 확인되었다.

• 생약학회지
• /
• 제34권1호통권132호
• /
• pp.40-44
• /
• 2003

Antler has been used as one of the important traditional oriental medicines for many years. It contains many biochemical components including lipids, peptides, carbohydrates, and inorganic substances. The various biological activities of antler are being considered owing to such biochemical components. The purpose of this research is to compare the biochemical components of antlers after treatment of three different kinds of fodder. They are mulberry (group A), Lycii Fructus (group B) and the complex of herbs (group C). The chemical composition of each antler was determined in three sections (top, middle, and bottom) and compared with those of the control. The contents of sialic acid, uronic acid and glycosaminoglycans increased in the top antlers of the group B. Total lipids content increased in the top antlers of all groups (A, B, and C). The concentration of inorganic ions (Ca, Mg, and P) decreased in all groups. Fattyacid composition was also analyzed by GC-MS and expressed as percentage of total fatty acid concentration. The content of palmitic acid decreased in all groups. The content of 2-hydrox-yhexadecanoic acid, which has not been reported in aster, increased in the top antlers of all groups. These results suggest that the treatment of special fodder may affect the composition of the biochemical components of antlers.

• 한국약용작물학회지
• /
• 제2권2호
• /
• pp.162-167
• /
• 1994

국내에서 자생하고 있는 광릉쥐오줌풀 및 넓은잎 쥐오줌풀의 지하부에서 지방산, 무기성분 및 휘발성 유기산의 조성을 분석한 결과는 다음과 같다. 1. 광릉 및 넓은잎 쥐오줌플의 조지방질 함량은 $3.7{\sim}4.5%$ 범위 이었고 지방산은 총11종이 동정되었는데 그중 특히 양적으로 많이 함유되어있는 linoleic acid, linolenic acid 및 palmitic acid 등은 산지에 따라 함량차이가 큰 경향을 보였다. 2. 희분함량은 $4.3{\sim}6.3%$ 이었고 무기성분중 많이 검출된 성분으로는 조규소$(SiO_2)$를 위시하여 K, Na, Ca, Mg, Al, Fe, Mn, Zn등 이었으며, Na, Fe, Zn 및 Cu 는 산지에 따라 함량차이가 큰 경향을 보였다. 3. 광릉 쥐오줌풀로 부터 분리한 산성분획으로 부터 40종의 성분을 확인하였으며 그중 dimethoxy-2-propenoic acid, 3, 4-dimethoxy benzoic acid, 4-methoxy phenyl-2-propenoic acid 이외에도 3-methyl butanoic acid(isovaleric acid), 3-methyl pentanoic acid, 2-methyl butanoic acid 등 branched-chain fatty acid 류가 양적으로 많이 검출되었다.

• Elastomers and Composites
• /
• 제52권3호
• /
• pp.201-210
• /
• 2017

We studied the antibacterial effect and mechanical properties of PLA composites with in organic porous zeolite-type bacteriocides. The specimens were prepared by an intermeshing co-rotating twin screw extruder using different contents of inorganic bacteriocide. The degree of dispersion of the in organic bacteriocide in the PLA composite was confirmed by FE-SEM. The contents of Ag and Zn in the composite were also investigated by energy dispersive spectroscopy at different concentrations of the inorganic bacteriocide. The antibacterial effects were analyzed by turbidity analysis, shaking culture, and drop-test. The mechanical properties, such as the tensile and flexural properties, impact strength, and physical properties, were also investigated. As the content of inorganic bacteriocide increased, the antibacterial activity was increased, especially against Staphylococcus aureus. Mechanical properties, namely, tensile strength, elongation, flexural strength, and impact strength, tended to decrease with an increase in inorganic bacteriocide content, but the tensile and flexural modulus increased.

• Transactions on Electrical and Electronic Materials
• /
• 제3권1호
• /
• pp.9-13
• /
• 2002

In this work, the surface of inorganic fillers were modified with some functional groups such as stearic acid, aliphatic long chain, vinylsilane and aminosilane to control the interaction between inorganic fillers and polymer matrix. Ethylene-vinyl acetate copolymers (EVA) with various amount of vinyl-acetate and copolyether-ester elastomer were used as polymer matrix. The addition of inorganic fillers increases flame retardancy, but results in steep drop of electrical and mechanical properties, which may be caused by the defects in the interface between organic/inorganic hybrid composites. The hybrid composites are found to show better mechanical properties and higher volume resistivities as inorganic fillers are well dispersed and have good adhesion with polymer matrix. Also, the most effective type of functional group coated on fillers depends on the chemical structure of polymer.