• Journal of the Korean Graphic Arts Communication Society
• /
• v.29 no.2
• /
• pp.33-44
• /
• 2011

The inorganic powder EL lamp was made by screen printing technique with a phosphor ink and a dielectric ink. The thickness of a phosphor ink layer and a dielectric ink layer is $35{\mu}m$ and $54{\mu}m$ respectively. A increasing ratio of the luminance of inorganic powder EL lamp to be a 1P1PD-phosphor ink layer in which increased voltage at constant frequency is higher 12% than when increased frequency at constant voltage. It is higher 57% than when increased frequency at constant voltage that the rate of increase of the luminance of inorganic powder EL lamp to be a 2PD-phosphor ink layer in which increased voltage at constant frequency. Finally, when increased voltage at constant frequency, a increasing ratio of the luminance of inorganic powder EL lamp to be a 2PD-phosphor ink layer is higher about 40% than that to be a 1P1PD-phosphor ink layer.

• Journal of Sericultural and Entomological Science
• /
• v.43 no.1
• /
• pp.21-25
• /
• 2001

Jeung-pyun added to mulberry leaves powder was tested to prove in inorganic ingredients, physical function, chromaticity and rheometer. For cake, mulberry leaves powder were added to rice flour in the ratio of 0%, 1%, 2%, and 3% respectively. In inorganic ingredients test, the amounts of calcium, magnesium and potassium were increased according to adding levels of mulberry leaves powder. But the amounts of iron, copper and zinc, were not correlated with it. Calcium, magnesium and potassium are anti-hypertension inorganic substances. Thus, it is considered that food with plenty amountsz of inorganic ingredients is an effective diet for the patients who suffer from cardiovascular disease. In physical evalution test, the ratio of mulberry leaves powder was not correlated with the appearance of Jeung-pyun. The value of color decreased as the ratio of mulberry leaves powder increases. In texture, Jeung-pyun. The value of color decreased as the ratio of mulberry leaves power increase. In texture, Jeung-pyun added with 2% mulberry leaves powder had the highest value. In moisture, as the level of mulberry leaves powder was increased, the value was decreased. In rheometer test, Jeung-pyun 0% mulberry leaves powder had the highest value in hardness. While the ratio of mulberry leaves powder was not correlated with cohesiveness. Jeung-pyun added to 1% mulberry leaves powder had the highest value. In gummines and brittleness, 0% Jeung-pyun had the highest value, but the ratio was not correlate with cohesiveness.

• Korean journal of food and cookery science
• /
• v.16 no.4
• /
• pp.311-315
• /
• 2000

Mulberry leaves Julpyun(a traditional Korean rice cake) was prepared by adding Mulberry leaves powder in the ratio of 0%, 3%, 6% and 9% of rice flour, and tested for inorganic nature, physical function, chromaticity, and rheological properties. As the ratio of mulberry leaves powder increased, both the amounts of major inorganic ingredients, calcium, magnesium, and sodium, and the amounts of minor inorganic ingredients, iron, copper, and zinc, were increased proportionally. Thus, one way to increase the amounts of inorganic ingredients appeared to add mulberry leaves powder. In physical function test, control cake(0% mulberry leaves) showed the highest value in appearance and the value decreased as the amounts of mulberry leaves increased. In color, 3%-mulberry leaves-Julpyun gave the highest value followed by 0%, 6%, and 9%-Julpyun in order. The values of texture and moisture were decreased as the ratio of mulberry leaves powder increased. In rheometer test, 9%-mulberry leaves Julpyun showed the high values in hardness, cohesiveness, and brittleness. Therefore, as the amounts of mulberry leaves powder increased, the amounts of inorganic ingredients increased, but the value of physical function test decreased. 9% mulberry leaves Julpyun has the highest value of rheometer test.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.551.2-551.2
• /
• 2006

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.551.1-551.1
• /
• 2006

• Carbon letters
• /
• v.3 no.3
• /
• pp.142-145
• /
• 2002

Multiwall carbon nanotubes (MWNT) were produced using the arc-discharge graphite evaporation technique. Composite films were developed using MWNT dispersed in polystirol polymer. In the present work, various properties of the polymeric thin film containing carbon nanotubes were investigated by optical absorption, electrical resistivity and the same have been discussed.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.29 no.2
• /
• pp.83-92
• /
• 2011

A inorganic powder EL lamp was made by screen printing technique with phosphor ink and dielectric ink. The thickness change of a phosphor ink layer and a dielectric ink layer were not influenced on dielectric content, but rely on phosphor size and vehicle. Once finishing screen printing technique with phosphor ink and dielectric ink, and its surface has been printed again before not drying of phosphor ink and dielectric ink. Then phosphor ink and dielectric ink were not transferred. The electric capacity of inorganic powder EL lamp was more influenced on dielectric content than the thickness of dielectric ink layer, and it was more dependent on the thickness of phosphor ink layer than the thickness of dielectric ink layer.

• Journal of the Korean Ceramic Society
• /
• v.43 no.9 s.292
• /
• pp.537-543
• /
• 2006

Length change, hydration heat, setting time and compressive strength of OPC were measured by adding KCl and replacing limestone powder so as to examine the influence of limestone powder on hydration of the OPC contained much chloride. In general, the chloride modified cement was high in heat of hydration, short in its setting time, low in its fluidity and low in its strength at 28 days due to the sudden hydration in its initial stage. As a result of the experiment, it has been demonstrated that heat of hydration, became low as one replaced limestone powder to the chloride modified cement, and the fluidity and shrinkage rate of mortar decreased without change in setting time; furthermore, the compressive strength at 28 days was improved.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.6
• /
• pp.50-58
• /
• 2020

When the concrete surface layer is damaged, The method of impregnating the concrete surface with a water repellent cannot secure the expected durability. Recently, various waterproofing and water-repellent materials were mixed into concrete or mortar to secure water repellency even inside cracks, but compressive strength was greatly reduced. In order to overcome the decrease in compressive strength, there has not yet been a study using the merits of organic and inorganic materials at the same time, so in this study, the physical properties and water repellency performance were evaluated by mixing an organic/inorganic composite water repellent appropriately mixed with an organic and inorganic material into the mortar. When mixed with organic/inorganic water repellent, the flow and air content were reduced by about 10% and 50% compared to the Liquid specimen. In the case of the P6L1 specimen, it was confirmed that the compressive strength decreased by about 3.5% compared to the non-mixed mortar at 39.5 MPa, the same as the existing water repellent, Powder. Water-repellent performance The organic-inorganic composite water repellent mixture specimen confirmed higher water repellency than the existing water repellent mixture powder, and the chloride penetration resistance evaluation result showed that the organic-inorganic composite water repellent mixture specimen reduced the passing charge by about 45% compared to the non-mixed mortar. In summary, it is judged that the P5L1 organic/inorganic composite water repellent mixed with a powder water repellent and a liquid water repellent in a ratio of 5:1 is the most reasonable to prevent the decrease in compressive strength and secure water repellency.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.05a
• /
• pp.120-121
• /
• 2021

The organic insulation material has excellent thermal insulation property, but it is difficult to expect fire stability, and semi inorganic insulation only delays combustible hour but it is difficult to expect fire stability. In this study, thermal insulation property of cement-based non-combustible inorganic insulation using cement and non combustible materials and redispersible polymer powder was studied. As a result of the experiment, the thermal insulation property decreased as the use of redispersible polymer powder increased, but the heat insulation property improved when using the appropriate amount.