• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.6
• /
• pp.50-58
• /
• 2020

When the concrete surface layer is damaged, The method of impregnating the concrete surface with a water repellent cannot secure the expected durability. Recently, various waterproofing and water-repellent materials were mixed into concrete or mortar to secure water repellency even inside cracks, but compressive strength was greatly reduced. In order to overcome the decrease in compressive strength, there has not yet been a study using the merits of organic and inorganic materials at the same time, so in this study, the physical properties and water repellency performance were evaluated by mixing an organic/inorganic composite water repellent appropriately mixed with an organic and inorganic material into the mortar. When mixed with organic/inorganic water repellent, the flow and air content were reduced by about 10% and 50% compared to the Liquid specimen. In the case of the P6L1 specimen, it was confirmed that the compressive strength decreased by about 3.5% compared to the non-mixed mortar at 39.5 MPa, the same as the existing water repellent, Powder. Water-repellent performance The organic-inorganic composite water repellent mixture specimen confirmed higher water repellency than the existing water repellent mixture powder, and the chloride penetration resistance evaluation result showed that the organic-inorganic composite water repellent mixture specimen reduced the passing charge by about 45% compared to the non-mixed mortar. In summary, it is judged that the P5L1 organic/inorganic composite water repellent mixed with a powder water repellent and a liquid water repellent in a ratio of 5:1 is the most reasonable to prevent the decrease in compressive strength and secure water repellency.

• Journal of Ecology and Environment
• /
• v.38 no.3
• /
• pp.319-326
• /
• 2015

This study investigates the behavioral characteristics and forms of phosphorus in the sediment according to the oxygen condition (aerobic/anaerobic). In the behavioral characteristics analysis, Al-P and Fe-P concentrations were the highest among the forms of inorganic phosphorus, and therefore had the strongest impact on sorption and release corresponding to environmental condition changes. In the experimental investigation of the inorganic forms of phosphorus in the sediment according to the oxygen condition, we determined that the forms of inorganic phosphorus did not greatly affect the sorption or release reaction because the distribution ratios of the inorganic forms remained constant corresponding to changes of dissolved oxygen (DO) conditions. In contrast, the forms of organic phosphorus in the sediments affected both sorption and release. Furthermore, labile-P and moderately labile-P forms were the major mechanisms of sorption in sediment. Moderately labile-P was the greatest contributor to phosphorus release action in sediment. As environmental changes are important for the behavioral characteristics of phosphorus in sediment, the forms of phosphorus should be considered to have a greater effect, especially in the organic phosphorus case. Therefore, based on the present study results, sediment evaluation aimed at controlling internal pollutants in reservoirs should include an examination of the forms of phosphorus present, as well as the release characteristics of environmental changes, which are influential factors of phosphorus control. Further research in this field is required.

• Asian Journal of Turfgrass Science
• /
• v.26 no.2
• /
• pp.110-115
• /
• 2012

Soil amendments have been used to improve the physical and chemical condition of turf soil, which might optimize turfgrass growth in golf courses. This study was to investigate the effect of inorganic soil amendment (ZC) established in USGA root zone system on growth of creeping bentgrass, cv. 'Penncross' carried out from May to Dec. in 2005 at the nursery on Sinwon Golf Course. To analyze the effects of inorganic soil amendment on pH, specific gravity, infiltration rate, water content, soil hardness, root length, tiller density and dry weight were measured. pH was 6.7-6.8, specific gravity of sand (S) 100% was 1.48 heavier than the other treatments (1.28-1.38). Infiltration rate with ZC 15% + peat moss (P) 5% + S 80% and ZC 10% + S 90% was faster than S 100%. Soil hardness of S 100% was the highest. Root length of creeping bentgrass of P 10% + S 90% (8.6-12.0 cm) was the longest. Tiller density with P 5% + S 95% was more 4-7 ea than other treatments in summer season. In growing season, however, ZC 10% + P 5% + S 85% was more 2-3 ea than others. Dry weight of creeping bentgrass treated by ZC 10% + P 5% + S 85% in summer season and P 5% + S 95% in growing season were heavier than other treatments. It is recommended to combine 5-15% inorganic soil amendment and peat moss 5% with sand in order to sustain soil balance.

• Ecology and Resilient Infrastructure
• /
• v.5 no.1
• /
• pp.11-18
• /
• 2018

Phosphorous remains as one of the most limiting nutrients to plant growth, second only to nitrogen. Research on use of biochar as a soil amendment for available phosphorus in temperate calcareous soils has limited studies compared with to tropical acidic soils. An incubation experiment to assess phosphorous availability in a biochar amended calcareous soil under inorganic (Fused superphosphate, FSP) and organic fertilizer (bone meal, BM) and respectively, at the dose of 40, 80 and $120mg\;P\;kg^{-1}$ was carried out. Soil was incubated at $25^{\circ}C$ for 70 days. Results show that the rate of increase in available P was proportional to the fertilizer application rate with or without biochar amendment. Biochar did not have a significant effect on soils amended with either fertilizeron the values of available P. However, time had a significant effect (p<0.001) on the amount of available P during the incubation period. Inorganic fertilizer treatments had recorded high amount of available P with time compared to organic fertilizer treatments. Organic fertilizer treatment sample were significantly not different from control and for most of the incubation time biochar acted as a soil conditioner. Further research is required to understand the holistic and long-term effect of biochar.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.5
• /
• pp.8-13
• /
• 2012

The flexography ink has disadvantage in a deinking process because it tends to form too fine particles in alkali condition to be removed in flotation deinking. The influence of pH conditions on the particle size of phthalocyanine cyan ink used for flexo-printing was investigated to see the effect of pH conditions on flexography ink dispersion. Flexography ink particles prepared by grinding dried ink films were used in this experiment. Greater reduction of the ink particle size was noticed under alkaline pH condition, which was attributed to dissolution of resin component of the ink. Adsorption behavior of flexography ink onto pigment particles was examined using clay and talc as substrate pigments. Pretreatment of inorganic pigments with a cationic poly-DADMAC increased the surface adsorption of flexography ink particles, which improved the removal of the inks by centrifugal sedimentation of inorganic pigments. Most efficient removal of the ink particles was achieved when an optimal addition level of the cationic polymer was used for pretreatment of inorganic pigments, and this optimal addition level corresponds to the surface saturation point of the polyelectrolyte. Adsorption of flexography ink particles onto inorganic pigments improved the ink removal in flotation deinking since the pigment particles has the optimal particle size for flotation deinking.

• Journal of the Korean Ceramic Society
• /
• v.31 no.3
• /
• pp.291-297
• /
• 1994

Cordierite powders were prepared by controlled hydrolysis of metal alkoxides with catalysts in water medium without using organic solvents. Water was adjusted to a certain pH by HC1 and NH4OH. $\alpha$-Cordierite powder was prepared from aluminum isopropoxide, tetraethyl orthosilicate and magnesium ethoxide mixed with water adjusted to pH of 3. At water pH of 11, $\alpha$-cordierite, mullite and $\beta$-quartz phases were coexisted. The powders were freeze dried, calcined and then fired at different temperatures. The characteristics of powders were examined by means of DTA, X-ray diffraction, FT-IR, and electron microscopy. It was found that $\alpha$-cordierite could be synthesized at temperature of 120$0^{\circ}C$ from the powders prepared by alkoxides with water medium without organic solvents.

• Journal of Korean Society for Atmospheric Environment
• /
• v.19 no.E3
• /
• pp.129-136
• /
• 2003

Effects of inorganic aerosols on the kinetics of the hydroxyl radical reactions with selected aliphatic alkanes have been investigated using the relative rate technique. The relative rates in the absence and presence of aerosols were determined for n-butane, n-pentane, n-hexane, n-octane, and n-decane. P-xylene was used as a reference compound. Inorganic aerosols including (NH$_4$)$_2$SO$_4$, NH$_4$NO$_3$, and NaCl aerosols at two different aerosol concentrations that are typical of polluted urban conditions were tested. Total surface areas of aerosols were 1400 (Condition I) and 3400 $\mu$$m^2$ cm$^{-3}$ (Condition II). Significant changes in the relative rates in the presence of the inorganic aerosols were not observed for the n-butanel/$.$OH, n-pentanel/$.$OH, n-hexanel/$.$OH, n-octanel/$.$OH, and n-decanel/$.$OH reactions versus p-xylenel/$.$OH reaction. These results suggest that the promoting effects depend on the semiconducting property of the aerosols and the nature of the organic compounds.

• Journal of the Korean Ceramic Society
• /
• v.39 no.4
• /
• pp.401-408
• /
• 2002

The influence of $H_3BO_3$ in one of inorganic retarder for the hydration of OPC was investigated. The shape of needdle Ettringite formed in few minitues for a no addition of $H_3BO_3$ but, retarded to form of Ettringite and $Ca(OH)_2$ according to addition of $H_3BO_3$. Hydration was retarded for tranquil of Al ion by to be low of pH.

• Journal of Industrial Technology
• /
• v.29 no.A
• /
• pp.55-60
• /
• 2009

Stabilization treatment is one of processes for wastes and their components to reduce their toxicity and migration rates to surroundings. Inorganic binders such as calcium hydroxide, blast furnace slag and red mud were tested for their potential applicability to in-situ stabilization of heavy metal contaminated tailings in the abandoned metal mines. Columns(150mm dia. ${\times}$ 450mm length) filled with mixtures of inorganic binders and tailing from the Geumjang mine with various mixing ratios of binders to tailings, 5%, 7% and 9% were applied artificial rainfall tests for 28 days. Effluents from columns filled with calcium hydroxide and tailing showed high pH's of ~12.5 and a increasing trend of concentration in Pb and Zn with a significant decrease in permeability in terms of elapsed days. Those with burning slag and tailing showed pH's of ~8.5 and significantly low concentrations in heavy metals with a stable permeability. In case of red mud, effluents showed significantly low concentrations in heavy metals but a decreased permeability with pH's of ~10.5. Conclusively, this basic study suggests burning furnace slag be a potential stabilizer for effective treatment of heavy metal contaminated mine tailings.

• Journal of Environmental Science International
• /
• v.13 no.9
• /
• pp.807-817
• /
• 2004

The modified biochemical oxygen demand (MBOD) were conducted to evaluate the water quality and fertility in the Mangyeong river from november 2002 to april 2003. MBOD method was used to evaluate algal growth potentials and their limiting factors. MBOD depends on the amount of available inorganic nutrient and organic substrate during 5-day incubation in the dark condition at $20^{\circ}C.$ The MBOD assay depends on inorganic nutrients such as phosphorus and nitrogen as well as reduced carbon as called MBOD, MBOD-P, and MBOD-N, respectively. The concentration of pollutants were in the range of 3.08～48.36 mg/L for COD. The concentration of nutrients were in the range of 0.37～111.62 mg/L for dissolved inorganic nitrogen (DIN) and 0.00～1.03 mg/L for dissolved inorganic phosphorus (DIP). The results of MBOD bioassay showed that the MBOD, MBOD-P and MBOD-N values were 15～173 mg $O_2/L,$ 13～165 mg $O_2/L$ and 66～175 mg $O_2/L$ ranges, respectively. The MBOD values are found to be the highest in Iksan River and the lowest in Hari River throughout the Mangyeong River. The relationships of MBOD, MBOD-P and MBOD-N in MBOD method were generally found in MBOD$\risingdotseq$ MBOD-P$\risingdotseq$MBOD-N. But the result of Gosan was appeared to MBOD$\risingdotseq$MBOD-N > MBOD-P. The MBOD-N value was higher 3 to 5 times than the MBOD-P value in the Gosan station. The algal growth potentials expressed as the concentration of chlorophyll-a were maximum 20 times more than algal biomass in the water column.