• 한국초지조사료학회지
• /
• 제16권2호
• /
• pp.133-138
• /
• 1996

To investigate the effects of inorganic phosphate ($P_2O_5$ 200kg/ha), fermented cow manures($P_2O_5$ 200kg/ha, 400kg/ha) and poultry manures($P_2O_5$ 200kg/ha, 400kg/na) levels mixed with sawdust on the soil changes and productivity of alfalfa monoculture, a field experiment arranged by randonmized complete block design was conducted at National Livestock Research Institute in Suwon, September, 1993 to December 1995. The results are as follows. S1. Soil pH was changed from 5.40(before experiment) to 6.17(fermented cow manure, $P_2O_5$ 400kg/ha), 6.76 (fermented poultry manure, $P_2O_5$400kg/ha) and 6.3l(inorganic phosphate, $P_2O_5$ 200kg/ha) at 0~5cm depth of subsoil, respectively. Organic contents after experiment were lower as a range of 2.41%~3.15% than those before experiment. 2. Total nitrogen contents of each treatment showed as 0.13%~0.16% at 0~5cm depth of subsoil comparing with before experiment(0.15%). Available phosphate content of inorganic phosphate($P_2O_5$200kgha) was highest as 405ppm. lowest as 125ppm(fermented poultry manure, $P_2O_5$ 200kg/ha) than before trial(205ppm). 3. K and Ca contents of after experiment were appeared to 0.22%~0.78% and 6.45%~9.45% comparing with before experiment(0.10% and 3.56%), respectively. 4. During two years, average DM yield of fermented cow rnanure($P_2O_5$ 400kg/ha) was highest as 11, 731kg/ha and lowest as 9, 017kg/ha at fermented poultry manure plot($P_2O_5$ 200kg/ha) with as sawdust, but no significant difference was found among treatment(P>0.05). 5. CP production, NEL and TDN yield of fermented cow manure($P_2O_5$ 400kg/ha) were highest as 2, 282kg/ha 69, 900kg/ha and 6, 392kg/ha, respectively, but no significant difference among treatment(P>0.05). 6. In inorganic contents of alfalfas, there was not show same tendency in accordance with treatments. As a results mentioned above, it was possible to use 200kg $P_2O_5/ha$ of fermented cow or poultry manure with sawdust instead of inorganic phosphae fertilizer.

• 한국전기전자재료학회논문지
• /
• 제25권5호
• /
• pp.381-386
• /
• 2012

To study encapsulation method for large-area organic light emitting diodes (OLEDs), red emitting OLEDs were fabricated, on which $Alq_3$ as organic buffer layer and LiF and Al as inorganic protective layers were deposited to protect the damage of OLED by epoxy. And then the OLEDs were attached to flat glass by printing method using epoxy. The basic structure of OLED doped with rubrene of 1 vol.% as emitting layer is ITO(150 nm) / 2-TNATA(50 nm) / ${\alpha}$-NPD(30 nm) / $Alq_3$:Rubrene(30 nm) / $Alq_3$(30 nm) / LiF(0.7 nm) / Al(100 nm). In case of depositing $Alq_3$, LiF and Al and then attaching of flat glass onto OLED, current density, luminance, efficiency and driving voltage were not changed and lifetime was increased according to thickness of Al as inorganic protective layers. The lifetime of OLED/$Alq_3$/LiF/Al_4/glass structure was 139 hours increased by 15.8 times more than bare OLED of 8.8 hours and 1.6 times more than edge sealed OLED of 54.5 hours.

• 한국세라믹학회지
• /
• 제36권1호
• /
• pp.82-88
• /
• 1999

본 연구에서는 fine ceramics의 합성법을 traditional ceramics 합성에 적용하여 합성한 내화재료용 mullite에 광화제를 첨가함으로서 광화제가 mullite 생성에 미치는 영향을 관찰하고자 한다. 출발물질로 하동 kaolin과 boehmite를 사용하였으며, 여기에 광화제로 MnO와 TiO2를 액상으로 첨가하였다. 그 결과 3.5 wt% MnO를 첨가한 경우, 1,25$0^{\circ}C$에서 미반응 silica와 alumina가 존재하지 않는 단일상의 mullite를 합성할 수 있었으며, TiO2 첨가시 2~3.5wt% MnO의 경우 mullite 생성 온도를 약 10$0^{\circ}C$ 낮출 수 있었다. 이때의 mullite 생성율은 1$650^{\circ}C$에서 84%이며, 부피 비중과 흡수율 및 상온에서 꺾임강도는 각각 2.72, 0.27%, 180MPa을 나타내어 광화제를 첨가하지 않은 경우보다 특성도 향상함을 알 수 있었다.

• 한국물환경학회지
• /
• 제29권5호
• /
• pp.610-617
• /
• 2013

Investigating the budgets of alkalinity and dissolved inorganic carbon (DIC) in lake water systems is significant for the examination of the behavior of a lake as a sink or a source with respect to the circulation of inorganic carbon chemistry. Budgets of total alkalinity ($Alk_T$) and DIC in Onondaga Lake, which was polluted by chronic calcium (Ca) loading in spite of the closure of soda ash ($Na_2CO_3$) facility, were determined by the analyses of inorganic carbon chemistry in tributary stream channels linked to the lake. AlkT and DIC fluxes of Onondaga Creek and Ninemile Creek occupied 65% and 54%, respectively, as larger tributary streams in comparison with other tributaries as well as different input sources. Budget calculations indicate that 18% of AlkT and 11% of DIC inputs to Onondaga Lake, respectively, remained immobilized in the Lake. This suggests that Ca chronically leached had been precipitated with inorganic carbon or remineralized by secondary mineral formation during the experimental period. In this study, the assumed mass balance calculation in Onondaga Lake with tributary streams resulted in exhibiting that the lake played a role of the sink for the inorganic carbon cycle.

• Applied Biological Chemistry
• /
• 제14권1호
• /
• pp.99-102
• /
• 1971

Saccharomyces rouxii $T_9$의 생육에 있어서 질소원 및 무기염류의 영향을 실험한 결과는 아래와 같다. (1) 무염배지의 경우 유기질소원으로서는 peptone을 $2.5{\sim}5.0%$ 첨가했을때 균의 생육이 가장 양호하였으며 무기질소원으로서는 $(NH_4)_2HPO_4$를 1.0% 첨가했을때 가장 양호하였다. (2) 20% 식염함유배지의 경우 유기질소원으로서는 yeast ext.를 1.5% 첨가했을때 가장 양호하였으며 무기질소원으로서는 urea를 5% 첨가 했을매 가장 양호하였다. (3) 무기염류로서 $NaNO_3$는 무염배지의 경우 1% 첨가했을때 가장 양호하였으나 20% 또 식염함유배지의 경우에는 26% 첨가했을 때보다 5%첨가했을때 더욱 양호 하였다. (4) $MgSO_4$와 $CaCl_2$는 0.5% 첨가한 경우 무염배지에서 보다도 20% 식염함유 배지에서 더욱 효과가 있었으며 $MgCl_2$는 26% 식염함유배지에 1%첨가 했을때 가장 효과가 있었다.

• 전기학회논문지
• /
• 제67권11호
• /
• pp.1463-1470
• /
• 2018

In this study, 20 types of samples were prepared by mixing different kinds of inorganic materials to develop insulation materials for epoxy - based GIS substation equipment used under high voltage environmentally friendly insulation gas. One of the electrical characteristics, AC insulation breakdown experiment was performed. As mixing ratio of mixed heterogeneous inorganic materials, the dielectric breakdown strength was increased with increasing filler ratio of micro silica, micro silica : micro Alumina, 1:9, 3:7, 5:5, 7:3, 9:1, and decreased as the filling amount of micro alumina increased. The AC insulation breakdown characteristics were the best when the composition ratio was 9:1. The higher the content of silica, the better the interfacial properties, and the larger the alumina content ratio, the worse the interfacial properties.

• 상하수도학회지
• /
• 제28권5호
• /
• pp.555-560
• /
• 2014

This study investigates the effect of sodium bicarbonate ($NaHCO_3$) on growth of S.dimorphus. $NaHCO_3$ concentration was varied from 0 to 2 g-C/L. As a result, the increase in concentration of $NaHCO_3$ up to 1.5 g-C/L increased dry weight of algae. The highest specific growth rate of S. dimorphus was $0.36day^{-1}$ which was obtained at concentration of 0.5 g-C/L $NaHCO_3$. pH showed a large variation range at the concentrations lower than 0.5 g-C/L $NaHCO_3$ whereas inorganic carbon, nitrate and phosphorus removal rates were almost same at the concentrations higher than 0.5 g-C/L $NaHCO_3$ (0.75, 1, 1.25, 1.5, 2 g-C/L $NaHCO_3$). Their average inorganic carbon, nitrate and phosphorus removal rate were 70 mg-C/L/d, 11.3 mg-N/L/d, and 1.6 mg-P/L/d, respectively. Thus, $NaHCO_3$ didn't effect on inorganic carbon, nitrate and phosphorus removal rate of S. dimorphus.

• Bulletin of the Korean Chemical Society
• /
• 제21권6호
• /
• pp.604-610
• /
• 2000

Drying-step in sol-gel processing was bypassed by exchanging alcoholic solvent in forsterite alcogel directly with MMA. By in-situ polymerization of the MMA, organic-inorganic nano-composite of PMMA-forsterite was prepared. As porous nature of inorganic networks in the gel was preserved and fixated in the composite, spherical morphology of PMMA was resulted. The PMMA-forsterite composite was optically transparent, machinable,mechanically sustainable, and thermally more stable than pristine PMMA. When doped with $Eu^{+3}$, inorganic moiety in the composite provided site environment that is very different from that in pristine PMMA. Prominent $^{5}D_0$ → $^{7}F_0$ transition at 578 nm, broken degeneracy in $^{5}D_0$ → $^{7}F_1$ and $^{5}D_0$ →$^{7}F_2$ transitions suggested that $Eu^{+3}$ was exclusively doped in the inorganic moiety of the composite, which had lower symmetry than the organic counterpart.

• 한국세라믹학회지
• /
• 제45권8호
• /
• pp.443-452
• /
• 2008

Shrinkage crack is a major concern for cement materials, especially for flat structures such as Korean On-Dol floor system, flooring for garages, and wall. One of the methods to reduce the adverse effects of shrinkage cracking is to reinforce cement materials with shot randomly distributed fibers. The efficiency of inorganic fibrous material to arresting cracks in cementitious composites was studied. Cement materials reinforced with five different qualities of inorganic fibrous material were tested. Contents of inorganic fibrous material were 1.0 kg, 1.5 kg, 2.0 kg, 2.5 kg, 3.0 kg by weight of cement mortar and C : S types of cement mortar were 1:3 and 1:4. W/C were 60% and 80%. Cement mortar of inorganic fibrous material reinforcement showed an ability to reduce the crack width and crack length significantly as compared to unreinforced cement mortar. $40%{\sim}60%$ drop in shrinkage crack of 1:4 cement mortar with 1.5 kg over was observed.

• 한국안전학회지
• /
• 제19권1호
• /
• pp.81-87
• /
• 2004

Composite particles using inorganic and organic chemicals were synthesized and the results of those reaction were compared to variation of temperature and agitation speed in presence of $CaCO_3$ which was adsorbed SDBS. Also the synthesises were optimized according to conversion rate of composite particles. In inorganic/organic core-shell composite particle polymerization, $CaCO_3$ adsorbed by 0.5wt% surfactant SDBS was prepared initially and then core $CaCO_3$ was encapsulated by sequential emulsion polymerization using MMA at the addition of APS 3.16${\times}$$10^{-3}$mol/L to minimize the coagulated PMMA particle itself during MMA shell polymerization. Encapsulated PMMA on $CaCO_3$ as inorganic/organic core-shell particles was verified by FT-IR and DSC analysis. It was found that the $CaCO_3$ was very well encapsulated by PMMA as shell. The surfaces were distinctly found as spindle shape and broad particle distribution after capsulation.