• Journal of The Korean Society of Grassland and Forage Science
• /
• v.16 no.2
• /
• pp.133-138
• /
• 1996

To investigate the effects of inorganic phosphate ($P_2O_5$ 200kg/ha), fermented cow manures($P_2O_5$ 200kg/ha, 400kg/ha) and poultry manures($P_2O_5$ 200kg/ha, 400kg/na) levels mixed with sawdust on the soil changes and productivity of alfalfa monoculture, a field experiment arranged by randonmized complete block design was conducted at National Livestock Research Institute in Suwon, September, 1993 to December 1995. The results are as follows. S1. Soil pH was changed from 5.40(before experiment) to 6.17(fermented cow manure, $P_2O_5$ 400kg/ha), 6.76 (fermented poultry manure, $P_2O_5$400kg/ha) and 6.3l(inorganic phosphate, $P_2O_5$ 200kg/ha) at 0~5cm depth of subsoil, respectively. Organic contents after experiment were lower as a range of 2.41%~3.15% than those before experiment. 2. Total nitrogen contents of each treatment showed as 0.13%~0.16% at 0~5cm depth of subsoil comparing with before experiment(0.15%). Available phosphate content of inorganic phosphate($P_2O_5$200kgha) was highest as 405ppm. lowest as 125ppm(fermented poultry manure, $P_2O_5$ 200kg/ha) than before trial(205ppm). 3. K and Ca contents of after experiment were appeared to 0.22%~0.78% and 6.45%~9.45% comparing with before experiment(0.10% and 3.56%), respectively. 4. During two years, average DM yield of fermented cow rnanure($P_2O_5$ 400kg/ha) was highest as 11, 731kg/ha and lowest as 9, 017kg/ha at fermented poultry manure plot($P_2O_5$ 200kg/ha) with as sawdust, but no significant difference was found among treatment(P>0.05). 5. CP production, NEL and TDN yield of fermented cow manure($P_2O_5$ 400kg/ha) were highest as 2, 282kg/ha 69, 900kg/ha and 6, 392kg/ha, respectively, but no significant difference among treatment(P>0.05). 6. In inorganic contents of alfalfas, there was not show same tendency in accordance with treatments. As a results mentioned above, it was possible to use 200kg $P_2O_5/ha$ of fermented cow or poultry manure with sawdust instead of inorganic phosphae fertilizer.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.5
• /
• pp.381-386
• /
• 2012

To study encapsulation method for large-area organic light emitting diodes (OLEDs), red emitting OLEDs were fabricated, on which $Alq_3$ as organic buffer layer and LiF and Al as inorganic protective layers were deposited to protect the damage of OLED by epoxy. And then the OLEDs were attached to flat glass by printing method using epoxy. The basic structure of OLED doped with rubrene of 1 vol.% as emitting layer is ITO(150 nm) / 2-TNATA(50 nm) / ${\alpha}$-NPD(30 nm) / $Alq_3$:Rubrene(30 nm) / $Alq_3$(30 nm) / LiF(0.7 nm) / Al(100 nm). In case of depositing $Alq_3$, LiF and Al and then attaching of flat glass onto OLED, current density, luminance, efficiency and driving voltage were not changed and lifetime was increased according to thickness of Al as inorganic protective layers. The lifetime of OLED/$Alq_3$/LiF/Al_4/glass structure was 139 hours increased by 15.8 times more than bare OLED of 8.8 hours and 1.6 times more than edge sealed OLED of 54.5 hours.

• Journal of the Korean Ceramic Society
• /
• v.36 no.1
• /
• pp.82-88
• /
• 1999

In this study, the formation of mullite phase with mineralizer have been investiagated Hadong Kaolin and boehmite were used as starting materials and also of TiCl4 and MnCl4 aquous solution were used as a mineralizer. In the addition of 3.5% MnO as a mineralizer, mullite single phase could be obtained at 125$0^{\circ}C$ without any other second phases. However in the addition of TiO2 as a mineralizer, mullite single phase is obtained at above 135$0^{\circ}C$. Therefore the formation of mullite is lowered in the case of MnO as a mineralizer than of TiO2. Because it is easy to obtain mullite single phase in the case of MnO addition, all the characteristics improved. The values of bulk density, water absorption and bending strength at room temperature were 2.72g/㎤, 0.27% and 180 MPa, respectively.

• Journal of Korean Society on Water Environment
• /
• v.29 no.5
• /
• pp.610-617
• /
• 2013

Investigating the budgets of alkalinity and dissolved inorganic carbon (DIC) in lake water systems is significant for the examination of the behavior of a lake as a sink or a source with respect to the circulation of inorganic carbon chemistry. Budgets of total alkalinity ($Alk_T$) and DIC in Onondaga Lake, which was polluted by chronic calcium (Ca) loading in spite of the closure of soda ash ($Na_2CO_3$) facility, were determined by the analyses of inorganic carbon chemistry in tributary stream channels linked to the lake. AlkT and DIC fluxes of Onondaga Creek and Ninemile Creek occupied 65% and 54%, respectively, as larger tributary streams in comparison with other tributaries as well as different input sources. Budget calculations indicate that 18% of AlkT and 11% of DIC inputs to Onondaga Lake, respectively, remained immobilized in the Lake. This suggests that Ca chronically leached had been precipitated with inorganic carbon or remineralized by secondary mineral formation during the experimental period. In this study, the assumed mass balance calculation in Onondaga Lake with tributary streams resulted in exhibiting that the lake played a role of the sink for the inorganic carbon cycle.

• Applied Biological Chemistry
• /
• v.14 no.1
• /
• pp.99-102
• /
• 1971

These experiment were conducted to study the effects of various nitrogen sources and inorganic salts upon the growth of Saccharomyces rouxii T-9, and the results obtained were as follows: 1) The strain showed the most rapid growth in the case of 2.5 to 5.0% addition of peptone as an organic nitrogen source, and 1.0% addition of $(NH_4)_2HPO_4$ as an inorganic nitrogen source respectively to the media containing no NaCl. 2) Its growth was the most rapid in the case of 1.5% addition of yeast extracts as an organic nitrogen sources, and 5% addition of urea as an inorganic nitrogen source respectively to the media containing 20% of NaCl. 3) Its growth was the most rapid in the case of 1% addition of $NaNO_3$ as an inorganic salt to the media containing no NaCl, while to the media containing 20% or 26% of NaCl its growth was more rapid in the case of 5% addition of $NaNO_3$ than 1% addition. 4) Its growth was more rapid in the case of 0.5% addition of $MgSO_4\;and\;CaCl_2$ respectively to the media containing 20% of NaCl than to the media containing no NaCl, and was rapid in the case of 1% addition of $MgCl_2$ to the media containing 26% of NaCl.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.11
• /
• pp.1463-1470
• /
• 2018

In this study, 20 types of samples were prepared by mixing different kinds of inorganic materials to develop insulation materials for epoxy - based GIS substation equipment used under high voltage environmentally friendly insulation gas. One of the electrical characteristics, AC insulation breakdown experiment was performed. As mixing ratio of mixed heterogeneous inorganic materials, the dielectric breakdown strength was increased with increasing filler ratio of micro silica, micro silica : micro Alumina, 1:9, 3:7, 5:5, 7:3, 9:1, and decreased as the filling amount of micro alumina increased. The AC insulation breakdown characteristics were the best when the composition ratio was 9:1. The higher the content of silica, the better the interfacial properties, and the larger the alumina content ratio, the worse the interfacial properties.

• Journal of Korean Society of Water and Wastewater
• /
• v.28 no.5
• /
• pp.555-560
• /
• 2014

This study investigates the effect of sodium bicarbonate ($NaHCO_3$) on growth of S.dimorphus. $NaHCO_3$ concentration was varied from 0 to 2 g-C/L. As a result, the increase in concentration of $NaHCO_3$ up to 1.5 g-C/L increased dry weight of algae. The highest specific growth rate of S. dimorphus was $0.36day^{-1}$ which was obtained at concentration of 0.5 g-C/L $NaHCO_3$. pH showed a large variation range at the concentrations lower than 0.5 g-C/L $NaHCO_3$ whereas inorganic carbon, nitrate and phosphorus removal rates were almost same at the concentrations higher than 0.5 g-C/L $NaHCO_3$ (0.75, 1, 1.25, 1.5, 2 g-C/L $NaHCO_3$). Their average inorganic carbon, nitrate and phosphorus removal rate were 70 mg-C/L/d, 11.3 mg-N/L/d, and 1.6 mg-P/L/d, respectively. Thus, $NaHCO_3$ didn't effect on inorganic carbon, nitrate and phosphorus removal rate of S. dimorphus.

• Bulletin of the Korean Chemical Society
• /
• v.21 no.6
• /
• pp.604-610
• /
• 2000

Drying-step in sol-gel processing was bypassed by exchanging alcoholic solvent in forsterite alcogel directly with MMA. By in-situ polymerization of the MMA, organic-inorganic nano-composite of PMMA-forsterite was prepared. As porous nature of inorganic networks in the gel was preserved and fixated in the composite, spherical morphology of PMMA was resulted. The PMMA-forsterite composite was optically transparent, machinable,mechanically sustainable, and thermally more stable than pristine PMMA. When doped with $Eu^{+3}$, inorganic moiety in the composite provided site environment that is very different from that in pristine PMMA. Prominent $^{5}D_0$ → $^{7}F_0$ transition at 578 nm, broken degeneracy in $^{5}D_0$ → $^{7}F_1$ and $^{5}D_0$ →$^{7}F_2$ transitions suggested that $Eu^{+3}$ was exclusively doped in the inorganic moiety of the composite, which had lower symmetry than the organic counterpart.

• Journal of the Korean Ceramic Society
• /
• v.45 no.8
• /
• pp.443-452
• /
• 2008

Shrinkage crack is a major concern for cement materials, especially for flat structures such as Korean On-Dol floor system, flooring for garages, and wall. One of the methods to reduce the adverse effects of shrinkage cracking is to reinforce cement materials with shot randomly distributed fibers. The efficiency of inorganic fibrous material to arresting cracks in cementitious composites was studied. Cement materials reinforced with five different qualities of inorganic fibrous material were tested. Contents of inorganic fibrous material were 1.0 kg, 1.5 kg, 2.0 kg, 2.5 kg, 3.0 kg by weight of cement mortar and C : S types of cement mortar were 1:3 and 1:4. W/C were 60% and 80%. Cement mortar of inorganic fibrous material reinforcement showed an ability to reduce the crack width and crack length significantly as compared to unreinforced cement mortar. $40%{\sim}60%$ drop in shrinkage crack of 1:4 cement mortar with 1.5 kg over was observed.

• Journal of the Korean Society of Safety
• /
• v.19 no.1
• /
• pp.81-87
• /
• 2004

Composite particles using inorganic and organic chemicals were synthesized and the results of those reaction were compared to variation of temperature and agitation speed in presence of $CaCO_3$ which was adsorbed SDBS. Also the synthesises were optimized according to conversion rate of composite particles. In inorganic/organic core-shell composite particle polymerization, $CaCO_3$ adsorbed by 0.5wt% surfactant SDBS was prepared initially and then core $CaCO_3$ was encapsulated by sequential emulsion polymerization using MMA at the addition of APS 3.16${\times}$$10^{-3}$mol/L to minimize the coagulated PMMA particle itself during MMA shell polymerization. Encapsulated PMMA on $CaCO_3$ as inorganic/organic core-shell particles was verified by FT-IR and DSC analysis. It was found that the $CaCO_3$ was very well encapsulated by PMMA as shell. The surfaces were distinctly found as spindle shape and broad particle distribution after capsulation.