• Computers and Concrete
• /
• v.17 no.1
• /
• pp.67-86
• /
• 2016

Strengthening as well as correcting unsightly deflections of reinforced concrete (RC) beam may be accomplished by retrofitting. An innovative way to do this retrofitting that is proposed in this study utilizes turnbuckle to apply external post-tensioning. This Turnbuckle External Post-Tensioning (T-EPT) was experimentally proven to improve the serviceability and load carrying capacity of reinforced concrete beams. The T-EPT system comprises a braced steel frame and a turnbuckle mechanism to provide the prestressing force. To further develop the T-EPT, this research aims to develop a numerical scheme to analyze the structural performance of reinforced concrete beams with this kind of retrofitting. The fiber method analysis was used as the numerical scheme. The fiber method is a simplified finite element method that is used in this study to predict the elastic and inelastic behavior of a reinforced concrete beam. With this, parametric study was conducted so that the effective setup of doing the T-EPT retrofitting may be determined. Different T-EPT configurations were investigated and their effectiveness evaluated. Overall, the T-EPT was effective in improving the serviceability condition and load carrying capacity of reinforced concrete beam.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.3
• /
• pp.99-106
• /
• 1998

Recently, scientists introduced a new type of microscope capable of investigating nonconducting surfaces in an atomic scale, which is called AFM (Atomic Force Microscope). It was an innovative attempt to overcome the limitation of STM (Scanning Tunnelling Microscope) which has been able to obtain the image of conducting surfaces. Surfaces of samples are imaged with atomic resolution. The AFM is an imaging tool or a profiler with unprecedented 3-D resolution for various surface types. The AFM technology, however, leaves a lot of room for improvement due to its delicate and fragile probing mechanism. One of the room for improvements is gap control between probe tip and sample surface. Distance between probe tip and sample surface must be kept in below one Angtrom in order to measure the sample surface in Angstrom resolution. In this paper, AFM system modeling, experimental system identification and control scheme based on system identification are performed and finally sample surface is measured by home-built AFM with such a control scheme.

• Journal of Communications and Networks
• /
• v.14 no.6
• /
• pp.692-702
• /
• 2012

Supporting quality of service (QoS) guarantees for diverse multimedia services are the primary concerns for WiMAX (IEEE 802.16) networks. A scheduling scheme that satisfies QoS requirements has become more important for wireless communications. We propose a downlink scheduling scheme called adaptive priority-based downlink scheduling (APDS) for providing QoS guarantees in IEEE 802.16 networks. APDS comprises two major components: Priority assignment and resource allocation. Different service-type connections primarily depend on their QoS requirements to adjust priority assignments and dispatch bandwidth resources dynamically. We consider both starvation avoidance and resource management. Simulation results show that our APDS methodology outperforms the representative scheduling approaches in QoS satisfaction and maintains fairness in starvation prevention.

• International Journal of High-Rise Buildings
• /
• v.11 no.3
• /
• pp.197-205
• /
• 2022

One of important design challenges in Chongqing Raffles City Plaza project is Sky Bridge structural design and its connection scheme in high level. This article systematically describes the structural system and its design and analysis methodology, with discussing the impacts on structural performance due to different connection approaches. The seismic isolation scheme in high level is innovatively adopted to the final design. Under the conditions of various load cases, the different models and assumptions are implemented. A full assessment on Sky Bridge's structural performance, seismic isolation, and its connection is conducted in terms of seismic performance based design. By co-operating with architecture, MEP and other disciplines, the structural economy index is fulfilled.

• Journal of the Korean Institute of Landscape Architecture International Edition
• /
• no.1
• /
• pp.43-52
• /
• 2001

One of the major environmental issues Japanese cities is now facing with is the conservation of seminatural landscapes for the restoration of ecological integrity of urban areas. The satoyama landscape, which includes coppice woodlands, agricultural areas and rural settlements, is seen as an indispensable semi-natural landscape, formed as a result of man-nature interaction. However, because of the loss of the economic viability they are now abandoned and in the process of losing their ecological values. Today a number of local municipalities as well as NPO groups are involved in the conservation projects of these landscapes. Although satoyama landscapes are commonly believed to have maintained their character over the years, historical studies have revealed that these landscapes have experienced constant and dynamic changes due to a variation in human impacts. It is therefore understood that the conservation projects on satoyama landscapes should not intend to restore their past condition, but should wet the goal of maintaining their dynamic character by promoting ecological roles which the landscapes may play in the contemporary world. EXPO2005 project in Aichi Prefecture is a good example of a development project underway on satoyama landscapes which intend to conserve the landscapes by stimulating contemporary ecological for them. In EXPO2005 project the key issue was the conservation of semi-natural landscapes formed by constant and intensive human impacts over the centuries and thus allowing endemic and endangered species to be accommodated. The planning team proposed a scheme to restore economic viability of satoyama landscapes. The scheme involves re-introducing intensive human impacts through a new management system with an innovative technology. This may restore the economic viability of lumbers provided form satoyama woodlands. EXPO2005 is understood as a model case which stimulates contemporary ecological functions of satoyama landscapes by applying innovative planning concepts.

• Journal of Satellite, Information and Communications
• /
• v.8 no.3
• /
• pp.25-31
• /
• 2013

In this paper, a new interleaving method for spatially-multiplexed multi-input-multi-output (SM-MIMO) scheme in an integrated mobile satellite and terrestrial system is proposed. In the proposed scheme, the transmitted bits for satellite path are interleaved in an innovative way to make sure that bits multiplied with different channel gains will be located alternatively in one received codeword after demapping, in order to compensate the performance degradation due to high-correlation of the satellite path. In addition, the interleaver can be implemented in a computationally efficient way and with the minimum time delay.

• Journal of Communications and Networks
• /
• v.7 no.4
• /
• pp.525-536
• /
• 2005

In an IP-based network, automated dynamic assignment of IP addresses is preferable. In most wired networks, a node relies on a centralized server by using dynamic host configuration protocol (DHCP) to obtain a dynamic IP address. However, the DHCP­based approach cannot be employed in a mobile ad hoc network (MANET) due to the uncertainty of any centralized DHCP server. That is, a MANET may become partitioned due to host mobility. Therefore, there is no guarantee to access a DHCP server. A general approach to address this issue is to allow a mobile host to pick a tentative address randomly, and then use duplicate address resolution (DAR) protocol to resolve any duplicate addresses. In this paper, an innovative distributed dynamic host configuration protocol designed to configure nodes in MANET is presented. The proposed protocol not only can detect the duplicate address, but also can resolve the problem caused by duplicate address. It shows that the proposed protocol works correctly and is more universal than earlier approaches. An enhanced version of DAR scheme is also proposed in this paper to solve the situation of duplicate MAC address. The new and innovative approach proposed in this paper can make the nodes in MANET provide services to other networks and avoid packets from being delivered to incorrect destinations.

• Advances in robotics research
• /
• v.2 no.1
• /
• pp.69-97
• /
• 2018

Innovation is considered as key to ensure continuous advancement and firm progress in any field. Robotics, with no exception, has gained triumph and approval based on its strength to address divers range of applications as well as its capacity to adapt new ways and means to enhance its applicability. The core of novelty in robotics technology is the perpetual curiosity of human beings to imitate natural systems. This desire urges to continuously explore and find new feet. In the past, contemporary machines, in different shapes, sizes and capabilities, were developed that can perform variety of tasks. The major advantage of these developments was the ability to exhibit superior control, strength and repeatability than the corresponding systems they were replicating. However, these systems were rigid and composed of hard an underlying structure, which is a constraint in bringing into being the compliance that exists in natural organisms. Inspiration of achieving such compliance and to take the full advantage of the design scheme of biological systems compelled researchers and scientists to develop systems avoiding conventional rigid structures. This ambition, to produce biological duos, needs soft and more flexible materials and structures to realize innovative robotic systems. This new footpath to craft biological mockups facilitates further to exploit new materials, novel design methodologies and new control techniques. This paper presents an appraisal on such innovative comprehensions, conferring to their design specific importance. This demonstration is potentially useful to prompt the novelty of soft robotics.

• Earthquakes and Structures
• /
• v.8 no.6
• /
• pp.1325-1348
• /
• 2015

Real-time hybrid testing (RTHT) involves virtual splitting of the structure into two parts: physical substructure that contains the key region of interest which is tested in a laboratory and numerical substructure that contains the remaining part of the structure in the form of a numerical model. This paper numerically assesses four step-by-step integration methods (Central difference method (CDM), Operator splitting method (OSM), Rosenbrock based method (RBM) and CR-integration method (CR)) which are widely used in RTHT. The methods have been assessed in terms of stability and accuracy for various realistic damping ratios of the physical substructure. The stability is assessed in terms of the spectral radii of the amplification matrix while the accuracy in terms of numerical damping and period distortion. In order to evaluate the performance of the methods, five carefully chosen examples have been studied - undamped SDOF, damped SDOF, instantaneous softening, instantaneous hardening and hysteretic system. The performance of the methods is measured in terms of a non-dimensional error index for displacement and velocity. Based on the error indices, it is observed that OSM and RBM are robust and performs fairly well in all the cases. CDM performed well for undamped SDOF system. CR method can be used for the system showing softening behaviour. The error indices indicate that accuracy of OSM is more than other method in case of hysteretic system. The accuracy of the results obtained through time integration methods for different damping ratios of the physical substructure is addressed in the present study. In the presence of a number of integration methods, it is preferable to have criteria for the selection of the time integration scheme. As such criteria are not available presently, this paper attempts to fill this gap by numerically assessing the four commonly used step-by-step methods.

• Journal of the Korean Society for Library and Information Science
• /
• v.20
• /
• pp.35-63
• /
• 1991

DDC, LCC, and CC can be said as the major schemes for mordern general library classification. Among these, DDC, since its publication in 1876, has been continuously studies and revised by many scholars and practitioners to publish 20th edition in 1989: LCC also has been studied and revised by the specialists in each subject, since 1904; and CC(first edition 1933) is now on the stage of 7th edition(1987). Even though studied, revised and developed by many classificationists, all these schemes maintain the general framework of the beginning, only with the partial revision and expansion to reflect the developments of the subjects. and antioipated tremendous amount of works resulted from reclassification also can be a reason that disturbs the full innovative revision of the scheme, because these are used in many libraries as a basic tools for the classification. But all these schemes mainly based on the state of the discipline at the time of their creation, the beginning of 20the century, and so in some aspect it is natural for them to have many problems. This study aims to investigate the problems in these major schemes, to find some ways to solve the problems, and to suggest the ideas for the basic design of a new modern library classification scheme. This plan is prepared to be applied to the situation of all countries equally without any revision. And in its notation, it uses two digits of Arabic numerals as centesimal, and so it is named provisionally to Plan for Centesimal Classification (PCC).