• 한국농촌건축학회논문집
• /
• 제15권4호
• /
• pp.43-50
• /
• 2013

This study is to clarify the characteristics and its change of spatial elements for community focused on the existing 22 old settlements in urban area of Cheongju. These community spaces are mainly divided into three parts, that is central space, inner road, and blind alley(cul-de-sac). The transitional characteristics of them are as follows. Firstly, the characteristics of central spaces is lasting, but the function is influenced by changing times. The function of central spaces located at the entrance to the village had been reduced to adjustments to modern lifestyle, and currently changed into senior citizen community center, supermarket, and public area. Secondly, as the width of the existing inner roads passed through old settlements had been extended, they are changed into pedestrian and traffic road, but the shape and function of them have been maintained. When new roads passed through old settlements had been established, the shape of old inner roads is disappeared, and the function of them is changed into byway and alley. Thirdly, cul-de-sacs of old settlements have tended to create a sense of community, but new cul-de-sacs formed by lot division have been only changed to passage. When new roads are established and cul-de-sacs are changed into alleys, the community between individual households is lost.

• 한국분무공학회지
• /
• 제19권2호
• /
• pp.75-81
• /
• 2014

Swirl flow in the gun type burner has a decisive effect on the stabilization of the flame, improvement of the combustion efficiency, and also a reduction of NOx. This swirl flow is created by the spinner which is inside the airtube that guide the combustion air. Gun type burner has generally the inner devices composed nozzle adapter, spark gap ignitor, and spinner. These inner components change the air flow behavior passing through air tube. Meanwhile, turbulent characteristics of this air flow are important to understand the combustion phenomena in the gun type burner, because the mixture of fuel and air are depended on. However, nearly all of the studies have been analyzed the turbulent flow of simplified combustion formation without the inner devices. So, this study conducted the measurement using by hot-wire anemometer and analyzed turbulent flow characteristics of the swirl flow discharged from the air tube with inner devices. Turbulence characteristics come up in this study were turbulence intensity, kinetic energy and shear stress of the air flow with the change of the distance of axial direction from the exit of the air tube.

• 설비공학논문집
• /
• 제22권6호
• /
• pp.413-418
• /
• 2010

The amount of heat loss of a refrigerator through the gasket is nearly 30% of total refrigerator heat loss. In this paper, quantitative evaluation for the effects of various effort to reduce heat losses through the gasket. The first trial is to extend the inner gasket to prevent the heat loss flowing from the inner of refrigerator. The effects of thermal conductivity changes of gasket and magnet are investigated by the numerical heat transfer analysis. The position change of hot line is also examined in the present research. From the present result of the numerical simulation of heat transfer, we are able to reduce the heat loss about 20~40% by using inner gasket extension. The reducing of thermal conductivity of gasket is considerable in the heat loss reduction. On the other hand, the thermal conductivity change of magnet has no apparent effect in heat loss reduction. The position change of hot line has considerable positive effect in the reduction of heat loss near gasket region.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 C
• /
• pp.1935-1937
• /
• 1996

This paper deals with ACSR(Aluminum Conductor Steel Reinforced) inner corrosion detection using a detector which automatically runs on an ACSR transmission line and inspects the inner corrosion of the conductor by utilization of the nondestructive eddy current test. And the relationship between the corrosion grades and the tensile strength can be estimated by means of this test. According to corrosion appearance and development of ACSR, the impedance change of the eddy current coils is theoretically verified. And then specifications And performances of the detector are described. Experimental procedures and desirable test results are reported. In conclusion, this detector can realize the nondestructive detecting of an ACSR inner corrosion. Upgrading the maintenance effciency and improving the reliability of transmission line would be expected by this nondestructive test method.

• 한국의류산업학회지
• /
• 제18권6호
• /
• pp.776-786
• /
• 2016

This study intends to suggest production process of circular knitted jackets and dimensional change data of finished clothes after washing. the study provides pattern design method of circular knitted jackets by applying dimensional change. By doing so, the purpose of this study is to increase production efficiency through accurate order in consideration of loss amount of the fabrics in production. With the three fabric materials selected, this study investigated dimensional change of circular knitted jackets after sewing and washing by varying the parts to be attached to padding cloth and with or without inner lining. As for the fabric F-C (including the spandex, thicker and weightier than the other two fabrics), front width shrunk by 4.6%, which showed the biggest shrinkage among the jackets made of test fabrics. Then it suggested design methods of circular knitted jacket patterns to which dimensional change is applied according to materials, and analyzed the amount of fabric required for production by comparison of the materials. When using the fabric F-C without inner lining, there is big dimensional change and more than double amount of fabric is required. It is expected that the research results will be a basic data for pattern design and production process of circular knitted clothing.

• 소성∙가공
• /
• 제20권7호
• /
• pp.512-517
• /
• 2011

TRB(Tailor Rolled Blank) is an emerging manufacturing technology by which engineers are able to change blank thickness continuously within a sheet metal. TRB door inner panels with required larger thicknesses can be used to support localized high loads. In this study, the aluminum alloy 5J32 TRB sheet is used for a door inner panel application. The TRB material properties were varied by using three heat treatment conditions. In order to predict the failure of the aluminum TRB during simulation, the forming limit diagram, which is used in sheet metal forming analysis to determine the criterion for failure, was investigated. Full-field photogrammetric measurement of the TRB deformation was performed with an ARAMIS 3D system. A FE model of the door inner panel was created using Autoform software. The material properties obtained from the tensile tests were used in the numerical model to simulate the door inner of AA 5J32 for each heat treatment condition. After finite element analysis for the evaluation of formability, a prototype front door panel was manufactured using a hydraulic press.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제5권3호
• /
• pp.454-467
• /
• 2013

A practical Ship Inner Shell Optimization Method (SISOM), the purpose of which is to improve the safety of the seagoing transport ship by decreasing the maximum Still Water Bending Moment (SWBM) of the hull girder under all typical loading conditions, is presented in this paper. The objective of SISOM is to make the maximum SWBM minimum, and the section areas of the inner shell are taken as optimization variables. The main requirements of the ship performances, such as cargo hold capacity, propeller and rudder immersion, bridge visibility, damage stability and prevention of pollution etc., are taken as constraints. The penalty function method is used in SISOM to change the above nonlinear constraint problem into an unconstrained one, which is then solved by applying the steepest descent method. After optimization, the optimal section area distribution of the inner shell is obtained, and the shape of inner shell is adjusted according to the optimal section area. SISOM is applied to a product oil tanker and a bulk carrier, and the maximum SWBM of the two ships is significantly decreased by changing the shape of inner shell plate slightly. The two examples prove that SISOM is highly efficient and valuable to engineering practice.

• 한국지역지리학회지
• /
• 제14권3호
• /
• pp.224-238
• /
• 2008

전통적인 도시내부 산업단지는 최근 산업구조의 고도화와 도시공간구조의 변화 등으로 인해 침체와 노후화 과정을 겪고 있다. 사례지역인 제3산업단지의 경우도 업체 규모와 생산액의 영세화, 주요업종의 변화, 필지의 세분화, 지가 변화 등에서 노후화의 특성을 보인다. 따라서 대구시는 단지의 노후화에 대한 대응책으로 향후 도심형 첨단산업단지로의 정비를 추진하고 있다. 반면 직접적인 노후화를 겪고 있는 업체들은 단지 재정비 계획에 대해 인지하지도 못한 채 침체와 노후화에 대한 뚜렷한 대책을 마련하지 못하고 있다. 따라서 대구시가 계획하고 있는 재정비 방안은 입주업체와 충분한 협의과정을 거쳐야 할 것이며, 향후 입주업체와 대구시의 입장을 매개해 줄 수 있는 핵심주체가 필요할 것이다.

• 전기학회논문지
• /
• 제58권2호
• /
• pp.391-398
• /
• 2009

In this study, we introduce the design methodology of an optimized fuzzy cascade controller with the aid of hierarchical fair competition-based genetic algorithm(HFCGA) for ball & beam system. The ball & beam system consists of servo motor, beam and ball, and remains mutually connected in line in itself. The ball & beam system determines the position of ball through the control of a servo motor. The displacement change the position of ball leads to the change of the angle of the beam which determines the position angle of a servo motor. Consequently the displacement change of the position of the moving ball and its ensuing change of the angle of the beam results in the change of the position angle of a servo motor. We introduce the fuzzy cascade controller scheme which consists of the outer(1st) controller and the inner(2nd) controller as two cascaded fuzzy controllers, and auto-tune the control parameters(scaling factors) of each fuzzy controller using HFCGA. The inner controller controls the position of lever arm which corresponds to the position angle of a servo motor and the outer controller decides the set-point value of the inner controller. HFCGA is a kind of parallel genetic algorithms(PGAs), and helps alleviate the premature convergence being generated in conventional genetic algorithms (GAs). For a detailed comparative analysis from the viewpoint of the performance results and the design methodology, the proposed method for the ball & beam system which is realized by the fuzzy cascade controller based on HFCGA, is presented in comparison with the conventional PD cascade controller based on serial genetic algorithms.

• 패션비즈니스
• /
• 제23권6호
• /
• pp.127-138
• /
• 2019

As health and well-being become a global trend, the younger generation is focusing on the balance between work and leisure time and they are interested in sports activities as well as a cultural life. In addition, the range of sportswear is expanding, so that athleisure fashion is getting into daily lives. In particular, consumer groups in the sportswear market are beginning to change since generation Z consumers are more and more interested in sportswear and their needs are also growing of health and functional of sports wear. It's a global trend that athleisure fashion market is growing, which combines professional athletic wear with fashion. As the number of women who enjoy sports and leisure in their spare time, the consumer pattern in the sports wear market is also expanding to female customers. However, most sports functional wears were focused on male consumers, so that functional inner-wears are mostly made for both sexes, which mean the functional inner-wears are produced without considering the physical characteristics of men and women and with not enough size division ending up not suitable for professional athletes. In particular, female professional athletes need functional inner-wear that fits the characteristics of the sport because they are not only different in physical condition and they are also using different muscles for different movements. Therefore, functional inner-wear needs pattern development and size system setting considering the body shape and athletic movement of female professional athlete.