• Animal Systematics, Evolution and Diversity
• /
• v.34 no.2
• /
• pp.119-125
• /
• 2018

A newly recorded species of lysianassid amphipod, Anonyx schefferi Steele, 1986 which belongs to the family Uristidae Hurley, 1963 was collected from the East Sea of Korea. The genus Anonyx Krøyer, 1838 was subdivided into five groups mainly based on the amount of constriction of the inner ramus of uropod 2: A. bispinosus group, A. compactus group, A. laticoxae group, A. nugax group, A. validus group. Anonyx schefferi is included in one of the A. laticoxae group. This species is similar to Anonyx laticoxae Gurjanova, 1962, but A. schefferi is characterized by an unconstricted inner ramus of uropod 2 and an upturned epimeron 3 posteroventrally. The species is described and fully illustrated in the present study.

• Advances in aircraft and spacecraft science
• /
• v.3 no.3
• /
• pp.259-269
• /
• 2016

In this work results from an underwater experiment on flow-induced noise in the interior of a towed body generated from a surrounding turbulent boundary layer are presented. The measurements were performed with a towed body under open sea conditions at towing depths below 100 m and towing speeds ranging from 2.4 m/s to 6.2 m/s (4 kn to 12 kn). Focus is given in the experiments to the relation between (outer) wall pressure fluctuations and the (inner) hydroacoustic near-field on the reverse side of a flat plate. The plate configuration consists of a sandwich structure with an (thick) outer polyurethane layer supported by an inner thin layer from fibre-reinforced plastics. Parameters of the turbulent boundary layer are estimated in order to analyse scaling relations of wall-pressure fluctuations, interior hydroacoustic noise, and the reduction of pressure fluctuations through the plate.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.18 no.4
• /
• pp.351-358
• /
• 2006

This paper presents analytical results of a rotary vane compressor performance when the compressor is used for air supply from underwater. Compression characteristics such as pressure and temperature in a compression chamber are analyzed. Volumetric and adiabatic efficiencies are calculated. Vane dynamics are also performed to give reaction forces on the vane from the cylinder inner surface and from vane slots. Compressor efficiency is about 34.9%, and about 55% of the compressor loss is produced by the friction between the vane nose and the cylinder wall. Volumetric efficiency is about 79.5%, and indicated efficiency is about 77.1%, which are comparable to other displacement type compressors. When roller was introduced between housing inner wall and vane tips, mechanical efficiency could be improved by as much as 24.9%, depending on the roller friction.

• Journal of Species Research
• /
• v.10 no.3
• /
• pp.287-300
• /
• 2021

Three new species of Myzomolgus are described as associates of sipunculans from a tidal flat in Phuket, Thailand. As diagnostic features, Myzomolgus leptocercosus n. sp. has elongate caudal rami which are 10.7 times longer than wide, 5 setae and a conical process on the first antennular segment, an armature formula 1, 0, 1+sucker, and 6 of antenna, and an inner coxal seta on all swimming legs. Myzomolgus spatulatus n. sp. lacks a rostrum, but bears 4 setae and a spatulate process on the first antennular segment, an armature formula 0, 0, 2+sucker, and 6 of the antenna, the inner coxal seta on legs 1-3, and 5 armture elements on the third endopodal segment of legs 1-3. Myzomolgus cucullatus n. sp. has short caudal rami which are 1.60 times longer than wide, a broad, hood-like tergite of fouth pedigerous somite, 4 setae only on the first antennular segment, the armature formula 0. 0. 2+sucker, and 6 of the antenna, and no iiner coxal seta on the swimming legs.

• Journal of Korean Port Research
• /
• v.9 no.1
• /
• pp.57-63
• /
• 1995

In this paper we examine the mass transport within the boundary layer near the sea bottom. The fluid domain is seperated into inner and outer region of boundary layers. In outer region, the wave field is assumed to be inviscid and irrotational. When the incident waves enter the arrays of circular cylinders, the scattering of water waves by an array of N bottom mounted vertical circular cylinders is solved using the method proposed by Linton & Evans under the potential theory. In inner region, the Navier-Stokes equation must be satisfied with boundary conditions at the boundary later and bottom is to be represented by the sum of the Eulerian mean drift and the Stokes' drift.

• Ocean and Polar Research
• /
• v.38 no.3
• /
• pp.171-184
• /
• 2016

In order to assess the level of contamination and identify the priority contaminants in the Busan coast, intensive sediment sampling was conducted and persistent organic pollutants and heavy metals were analyzed. The Sediment Quality Index (SQI) was derived based on the contaminant data by comparing with Sediment Quality Guidelines (SQGs) established in Korea, Canada, and Australia/New Zealand. Toxic contaminants were found to be widely distributed across the coast. Among organic contaminants, PAHs showed the highest concentration, followed by butyltins, nonylphenols, PBDEs, DDTs, PCBs, HCHs and CHLs. Heavy metals were also abundantly detected with the highest concentration of Zn followed by Cu > Cr > Pb > Ni > As > Cd > Hg. Compared to organic contaminants, most heavy metals, except for Cu and Hg, were homogeneously distributed along the coast in a good relationship with total organic carbon of sediment particles. In general, the concentrations of organic compounds and heavy metals were highest at the inner part of harbor areas with a tendency to decline from inside areas to the outside, indicating the high loading of pollutants from harbors. A high exceedance for low-SQGs and high-SQGs was found for TBT, p'-DDT, p,p'-DDD, Cu and Zn. The SQI scores calculated from low-SQGs and high-SQGs were in the range of 18-100 and 54-100, respectively. The inner part of Busan Harbor, Dadaepo Harbor, and Gamcheon Harbor were observed as being regions of concern. Overall, TBT, Cu, and p,p'-DDT were the chemicals most frequently exceeding SQGs and influencing SQI scores.

• 한국해양학회지
• /
• v.27 no.2
• /
• pp.123-136
• /
• 1992

As a result of faunal analysis on 50 bottom samples bearing a total of 183 species of the Recent benthonic foraminifers from the West and South Sea of korea, five bioassociations (groups of species) and five biotopes (groups of samples) were discriminated. From the areal distribution of biotopes in combination with bioassociations and the available ecological data of foraminiferal species, five biofacies are recognized: (1) Southern Inner Shelf Biofacies; (2) Southern Coast Biofacies; (3) Northern Middle Shelf Biofacies; (4) Central Middle Shelf Biofacies; and (5) Southern Outer Shelf and Upper Slope Biofacies. The biofacies are defined by a group of sampling stations containing a diagnostic species association and can be related to the major current pasterns and water masses in the West and South Sea of Korea: Southern Inner Shelf Biofacies is related to the Coastal Waters and drainage from China; Southern Coast Biofacies is related to the Coastal Waters and drainage from Korea; Northern Middle Shelf Biofacies is related to the Coastal Waters and Yellow Sea Cold Water, Central Middle Shelf Biofacies is related to the Yellow Sea Warm Current; and Southern Outer Shelf and Upper Slope Biofacies is related to the Tsushima Warm Current.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.4 no.4
• /
• pp.338-348
• /
• 1999

Physical properties of mudbelt sediments in the southeastern inner shelf of Korea are studied from 14 cores. Physical properties, compressional wave velocity, and sediment texture for core sediments are analyzed. The major source of sediment in the study area is the Nakdong River. Fine-grained sediments from the river are transported northeastward by coastal circulation and the Tsushima Current, resulting in a gradual northeastward increase in porosity and a decrease in wet bulk density and velocity. The trend matches well with the bathymetry. The mean grain size appears to be the most important variable to determine the physical properties and velocity. The variations of physical properties with burial depth are dependent more strongly on sediment texture than compaction and/or consolidation. Correlations between the physical properties and the sediment texture show slight deviations from those of the continental terrace sediment in the North Pacific and inner shelf sediment in the South Sea of Korea. The velocity is higher than that of the North Pacific and the South Sea sediments between these areas. This is probably due to differences in sedimentary, environment and mineral compositions. The higher sediment velocity in the study area may also be attributed to the escape of gas from pore space which decreases void ratio.

• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.8
• /
• pp.1240-1247
• /
• 2008

Leakage trouble on the sea water pipeline in engine room is often resulted from a localized corrosion due to severe corrosive environment caused by both high speed and high pressure of sea water flowing through the inner pipe. In addition, when the ship is in stand-by or emergency condition, underwater welding to control the leakage of sea water from a hole of its pipe is very important in an industrial safety point of view. In this study possibility of underwater welding to control leakage of sea water and corrosion property of its welding zone were investigated with the electrochemical methods by parameters of welding methods and welding electrodes when underwater welding is achieved with a such case that sea water is being leaked out with a height at 50mm from a hole of $2.5mm{\emptyset}$ of test pipe. Corrosion resistance of weld metal zone is better than the base metal and its hardness is higher than that of the base metal. However corrosion potential of weld metal zone showed a negative value than that of the base metal, therefore weld metal zone is preferentially corroded rather than the base metal by performance of galvanic cell due to difference of corrosion potential between weld metal zone and base metal. Eventually it is suggested that leakage of sea water is successfully controlled by underwater welding,

• Journal of the Korean earth science society
• /
• v.39 no.2
• /
• pp.154-163
• /
• 2018

Geoacoustic model comprises physical and acoustic properties of submarine bottom layers influencing sound transmission through sea water and underwater. This study suggested for the first time that we made a geoacoustic model of long-coring bottom layers at the SSDP-105 drilling site of the Ulsan coastal area, which is located in the southwestern inner shelf of the East Sea. The geoacoustic model of 52 m depth below seafloor with three-layer geoacoustic units was reconstructed in the coastal sedimentary strata at 79 m in water depth. The geoacoustic model was based on the data of a deep-drilled sediment core of SSDP-105 and sparker seismic profiles in the study area. For actual modeling, the geoacoustic property values of the models were compensated to in situ depth values below the sea floor using the Hamilton modeling method. We suggest that the geoacoustic model be used for geoacoustic and underwater acoustic experiments of mid- and low-frequency reflecting on the deep bottom layers in the Ulsan coastal area of the East Sea.