• 정보저장시스템학회논문집
• /
• 제2권2호
• /
• pp.156-162
• /
• 2006

In this paper, we have investigated the disc warping in high-speed slim-type optical disc drive. The track density as well as high rotational speed of the information storage devices must be increased to enhance their recording capacity and data transfer rate. Generally, ODD used in the Lap-top computer has small inner space. So, the flow instability of the inner space is increased rapidly with its rotational speed. In extreme case, the flow instability may cause the malfunction of the read/write pick-up of drives. The experiments and numerical analysis were carried out for several cases and the result shows the influence of airflow to the disc warping.

• 한국표면공학회지
• /
• 제31권5호
• /
• pp.286-296
• /
• 1998

Galvannealing is becomming the main stream of the coating technology applied to automobile outer and inner panels due to its low cost and easy application applied to automobile outer and inner panels due to its low cost and easy application in thick Zn coating, compared to electro galvanizing. Despite of filed up data with an experience in this field, galvannealing in thick Zn coating is getting more difficult because of the absence of Fe deposition in Zn coating. As a result, it exhibits, with different steel sheet and grain size there is a proper temperature range which is good for the tarket coating thickness of galvannealing. In case of 1,200mm wide and 0.77 mm thick extra low carbon steel with 20$mu extrm{m}$ grain size, its proper temperature range for galvannealing of one side 60g/$\textrm{m}^2$ is 470-$480^{\circ}C$.

• 한국항만학회지
• /
• 제9권2호
• /
• pp.51-64
• /
• 1995

Generally, it is pointed out that the submerged breakwater with one row can not regulate the long period waves efficiently, because the crown width is very shorter than the wave length of the long period waves. Therefore, the wide crown is needed to raise the controlling efficiency for the long period waves. This study picks up the submerged breakwater with two rows which has smaller construction materials comparing to the one row and discusses the wave controlling function for the long period waves. Judging from the results obtained by using the strict dividing region method, the submerged breakwater with two rows can more regulate the long period waves than one row can, especially, in case that crown width and inner width of its construction come to be wider.

• 보존과학연구
• /
• 통권29호
• /
• pp.111-124
• /
• 2008

Gold case which is called sarari container was excavated from Wangheungsaji of Buyeo in October 2007. This case did not contain sarira, but was filled with clear liquid. This study focused on component analysis of the liquid which had filled sarira container, because we didn't know if this case had not originally contained sarira or not. It is said that original sarira can be melted by a some liquid in this case. So, many kinds of samples which are liquid, soil and ground water, was collected from a inner and outer of sarira container, and analyzed using a IC, ICP-MS, GC-MS and SEM-EDS. As a result of analysis, all of the elements composition was identified by general components of soil and ground water. Especially, phosphate which is chemical element to consist of human bone, did not found in this liquid.

• 한국안전학회지
• /
• 제15권1호
• /
• pp.59-65
• /
• 2000

The purpose of this study is to investigate the details of unsteady heat transfer in a heated fire door. This investigation is carried out numerically for two dimensional fire door which is composed of normal plasterboard and mild steel including air layer or heat shield. It is shown from the results that the recirculation occurs at the inner part of fire wall due to gravity force by temperature difference. The case I gives better adiabatic effect than the case II because temperature around the fire wall reachs at $230.96^{\circ}C$ in the case I and reachs at $450.37^{\circ}C$ in the case II.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2007년 추계학술발표대회 개요집
• /
• pp.53-56
• /
• 2007

Magnesium sheet used in electrical device due to mobility and EMF shielding characteristics. Magnesium case by press forming was advantageous compare with conventional die casting process, because of its thin gauge of wall and surface quality. But it need to makes the boss to fix inner part or assemble the case. CD stud welding was effective way for joining the boss to the thin gauge case of the electrical devices. In this study, we investigated the performances of the magnesium boss welder To measure the process parameters such as the force and the weld current, we design the monitoring system for CD stud welding. We test the characteristics of CD stud welding for AZ31 sheets at some variables. Finally we select the optimum welding range of magnesium sheets in CD stud welding process.

• Fisheries and Aquatic Sciences
• /
• 제5권1호
• /
• pp.5-20
• /
• 2002

To investigate the effect of mechanical parameters on the circulation and its fluctuation in Sagami Bay, baroclinic model experiments were carried out by use of a two-layer source-sink flow in a rotating tank. In the experiment, a simple coastal topography with flat bottom was reproduced. The results show that the path of the Through Flow, which corresponds to the branch current of the Kuroshio, depends on external Rossby number (Ro) and internal Rossby number $(Ro^*)$, and divided into two regimes. For $Ro^*\leq1.0$ in which Rossby internal radius of deformation of the Through Flow is smaller than the width of the approaching channel, the current flows along the Oshima Island as a coastal boundary density current separated from the western boundary of the channel. For $Ro^*>1.0$ it changes to a jet flow along the western boundary of the channel, separated from the coast of Oshima Island. The current is independent on both Ro and Ro* in the regime of $Ro^*>1.0,\;Ro\geq0.06$ and $Ro^*\leq1.0,\;Ro\geq0.06$. The pattern of the cyclonic circulation in the inner part of the bay is also determined by Ro and Ro*. In case of $Ro^*\leq1.0$, frontal eddies are formed in the northern boundary of the Through Flow. These frontal eddies intrude into the inner part along the eastern boundary of the bay providing vorticity to form and maintain the inner cyclonic circulation. For $Ro^*>1.0$, the wakes from the Izu peninsula are superposed intensifying the cyclonic circulation. The pattern of the cyclonic circulation is divided into three types; 1) weak cyclonic circulation and the inner anticyclonic circulation $(Ro<0.12)$. 2) cyclonic circulation in the bay $(0.12\leq Ro<0.25)$. 3) cyclonic circulation with strong boundary current $(RO\geq0.25)$.

• 대한관절경학회지
• /
• 제4권1호
• /
• pp.38-41
• /
• 2000

목적 : 보존적 치료에 반응하지 않는 슬개골전 점액낭염에 대하여 점액낭 내벽의 염색후 관절경을 이용한 절제술을 시행하여 고무적인 결과를 얻었기에 그 임상적 결과를 보고하고자 한다. 대상 및 방법 : 1996년 1월부터 1998년 10월까지 본 교실에서 치료받은 20세 이상의 슬개골전 점액낭염의 환자중 관절경적 절제술을 시행받은 환자 11명을 대상으로 하였다. 수술방법은 앙와위에서 점액낭내로 관절경을 삽입후 메틸렌 블루를 이용하여 내벽의 염색을 시도한후 shaver를 이용하여 내벽을 제거후 지속적 폐쇄 흡입기를 설치한후 압박 드레싱한후 보행을 허용하였다. 결과 : 모든 환자에서 동통을 수반한 반흔은 없었으며 수술 직후부터 보행이 가능하였으며, 추시 관찰중 1례에서 지연 감염이 있었다. 결론 : 관절경을 이용한 슬개골전 점액낭염의 치료는 합병증을 최소화 할 수 있으며, 특히 시술시 점액낭 내벽을 염색함으로써 병변 조직의 구별이 용이하여 슬개골전 점액낭염의 치료에 있어 좋은 술식으로 생각된다.

• 셀메드
• /
• 제2권2호
• /
• pp.16.1-16.5
• /
• 2012

Fever in cancer patients is often due to the following causes: evil qi and toxity stagnancy, disorders of qi and blood, deficiencies of zang and fu organs, and the disorder of yin and yang. The treatments given to cancer patients with a fever are according to five: (a) Excessive inner heat and toxicants: remove heat and the toxicant, induce purgation. We use Cheng-Qi-Tang plus Qing-Wen-Bai-Du-Yin. (b) Tangle of damp and heat, and qi stagnancy: remove damp and heat, smooth the qi channel. We use Gan-Lu-Xiao-Du-Dan or San-Ren-Tang. (c) Obvious blood and heat stagnancy: remove heat and blood stasis. We use Xue-Fu- Zhu-Yu-Tang. (d) Deficiency of spleen qi, inner heat caused by a yin deficiency: nourish spleen qi and yin to remove the inner heat. We use Bu-Zhong-Yi-Qi-Tang or Xiao-Jian-Zhong-Tang. (e) Prominent yin deficiency and hectic fever: replenish yin and remove inner heat. We use Qing-Hao-Bie-Jia-Tang or Chai- Qian-Mei-Lian-San. The pathogenesis of fever in cancer patients is complicated. We can see both deficiency and excess in one differentiation. Therefore, we must make sure of it, then we can get the most effective treatment.

• 플랜트 저널
• /
• 제4권2호
• /
• pp.66-72
• /
• 2008

In this inquiry, I would suggest jet ventilation system for effective elimination of welding flaw at machinery material welding shop on plant and evaluate the airstream on inner space and property of welding flaw's density through the examination. We can know outer atmosphere inflows at the speed of about 0.05m/s from western entrance in case of stopping the jet ventilation system, but airstream is accumulated on entire space. At height of worker's breathing surface(Ground Level = 1.5 m, below of GL) and welding work center, density of welding flaw on upper part(GL = 12m) is appeared 4 times higher than outer atmosphere at surplus range besides nearby of western entrance. At operation of jet ventilation system, since the smooth air current transfer at inner space and exhaust effect the wind speed is maintained at 0.932 m/s at the point of height of worker's breathing surface on inner space and it's concluded about the working conditions have been better than before operation of jet ventilation system because of that results show that inner space density of welding flaw at height of worker's breathing surface is 40.5%, and in the work shop, it is 20.3% at upper part.