• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제20권2호
• /
• pp.166-172
• /
• 1998

Missing of the upper posterior dentition can cause alveolar bone resorption & pneumatization of Maxillary sinus wall, which makes traditional implant placement impossible, The solution includes various methods to the posterior maxilla to provide adequate bone support for implant installation and long-term survival. -- sinus floor elevation, sinus-lift graft, inlay graft using LeFort I osteotomy, onlay graft, This is a clinical Sr. retrospective study on implant surgery & prosthodontic restoration with upper edentulous posterior jaw from Jan. 1990. to Jun. 1997 at implant clinic of Chonbuk National University Hospital. The results obtained were as follows: 1. Six hundred ninety-nine implants were placed on upper posterior jaw of two hundred seventeen patients, among them one hundred sixty-five implants were placed in forty-four patients with sinus lift. 2. The height of the remained alveolar bone was classified on the base of Misch's concept. This included seventy-nine SA-1s, ninety-seven SA-2s, sixty-five SA-3s and sixty SA-4s. 3. Ninety percent of implants were successfully integrated in non-grafted area and eighty-seven percent of implants were successully integrated in sinus lift area.

• Journal of Chest Surgery
• /
• 제9권2호
• /
• pp.198-206
• /
• 1976

A Total of Forty eight patients underwent open-heart surgery for correction of tetralogy of Fallot at the Seoul National University Hospital from January 1974 to October 1976, with an overall survival rate of 77 per cent. Operative mortality varied according to severity of the lesion, age of the patient, nature of previous surgical treatment and presence or absence of an outflow tract patch across the pulmonary valve ring. Eleven patients died in the early postoperative period and thirty seven patients were discharged from the hospital alive. A patch of the right ventricular outflow tract and pulmonary annulus was required to relieve pulmonic stenosis in 24 patients. There were 10 deaths in this group (42%) as compared to 1 death in the group of 24 patients who were corrected without a patch. Operative mortality was especially higher when an inlay patch was placed across the pulmonary valve ring. This may be related to the possibly greater anatomic severity of these cases and to the longer operating time when a patch was used. The electrocardiogram showed right ventricular hypertrophy in 35 cyanotic patients. Intraventricular conduction was normal in 34 patients before operation. It was normal postoperatively in only 5 of 34 patients in this group who survived surgery. Complete right bundle branch block appeared at operation in 21 patients, and 8 patients developed incomplete right bundle branch block. Major causes of death were progressive cardiac failure (4), Complete atrioventricular dissociation (3), bleeding (2), cardiac tamponade (1), and sudden cardiac arrest (1)

• 한국멀티미디어학회논문지
• /
• 제14권2호
• /
• pp.194-200
• /
• 2011

RFID(Radio Frequency IDentification) 산업의 시장 동향은 가격 문제로 인하여 정체성을 보이고 있다. 근래에는 칩 가격의 하락으로 인해 칩을 제외한 태그 인레이 가격이 상대적으로 높아지고 있는 실정이며 태그 저 가격화를 실현하기 위해서는 빠르고 간단하면서도 저비용의 RFID 태그 설계 기술이 필수적이다. 따라서 본 논문에서는 안테나 설계를 위한 기반기술 중 하나인 칩 임피던스를 고려하여 태그를 설계하여 보다 정확하고 빠른 설계가 가능한 시스템 개발을 제안하였다. 제안한 시스템의 성능평가 결과 기존 시스템보다 20Mhz 내에서 공진 범위오차가 줄어들었으며, 판독 오류도 1.5m 이내로 줄어드는 성능개선 효과가 있었다.

• 시스템엔지니어링학술지
• /
• 제12권1호
• /
• pp.89-103
• /
• 2016

Due to safety of the plant, it became very clear the importance of study occurrence reactor coolant system (RCS) issues specially the primary water stress corrosion cracking (PWSCC). The Systems Engineering (SE) approach is characterized by the application of a structured engineering methodology for the design of a complex system or component. Robotic devices have been used for internal inspection, maintenance and performing remote welding and inspection in high-radiation areas. In this paper, PWSCC overview and inlay and over lay welding methodology introduced, concept of robotic device that can be inserted into the piping via Steam Generator (SG) main way to access to primary piping of pressurized water reactor (PWR) is developed based on SE methodology. A 3D model of the inspection system was developed along with the APR1400 (Advanced Power Reactor)reactor coolant systems (RCS) and internals with virtual 3D simulation of the operation for visualization to prove the validity of the concept.

• 대한관절경학회지
• /
• 제12권1호
• /
• pp.58-62
• /
• 2008

후방 십자 인대 재건술은 신경혈관 합병증 발생 위험율이 높은 수술 방법이다. 하지만 후방 십자 인대 재건술 후 발생한 심부 정맥 혈전증 및 그와 관련된 구획증후군에 대한 보고는 없다. 본 교실에서는 후방 십자 인대 파열로 반복적인 수술을 시행 받은 환자에서 경골 inlay 방법을 이용한 후방 십자 인대 재재건술 후 발생한 신경혈관 합병증의 증례를 보고하고 이의 중요성에 대한 고찰을 하고자 한다.

• 한국생산제조학회지
• /
• 제26권3호
• /
• pp.344-349
• /
• 2017

In this study, we developed a process technology to fabricate RFID tag antennas using a one-sheet inlay micro-pattern forming process by press-molding RFID tag antennas on insulation sheet layers, such as polymer films, using ultrasonic longitudinal vibration. In addition, a fine pattern applicable for RFID tag antennas was manufactured using a $25{\mu}m$ thick thin-plate square wire; this is in contrast to the method that uses a conventional round wire. The developed ultrasonic indentation process can be used to fabricate fine pattern of the RFID antenna using one piece of equipment. The simplified manufacturing process technology has a shorter manufacturing time and is more economical. The developed RFID tag antenna forming technique involves pressing the $25{\mu}m$ square wire directly on the thin sheet insulation sheet of maximum thickness $200{\mu}m$, using a 60 kHz ultrasonic tool horn.

• 한국전자파학회논문지
• /
• 제19권1호
• /
• pp.1-6
• /
• 2008

전도성의 도전사를 이용해서 UHF 대역의 입을 수 있는 T-정합 다이폴 형태의 RFID Tag 안테나를 디자인하였다. 도전사를 꼬아 만드는 실의 수에 따라 도전율을 측정하여, 그 값을 시뮬레이션에 적용하여 정확한 결과를 유도하였다. 기존의 구리 기판이니 구리 테이프를 사용한 Inlay 형태나 패치 형태의 RFID 태그가 아닌 의류의 특성상 착용감, 구부러짐 변화에도 문제점이 없이 구부러질 수 있는 도전사를 사용하였다. 제작한 RFID 태그안테나의 성능을 검증하기 위하여 안테나를 제작하고 반사 손실, 인식 거리 패턴 등을 측정하였다. 제작된 태그안테나의 인식 거리를 측정하였고, 약 2.4m의 인식 거리를 가지는 것을 확인하였다

• 한국가구학회지
• /
• 제27권2호
• /
• pp.69-79
• /
• 2016

This paper explores the inlaying technique of Geum-Cheol Kim, a joiner has made the traditional Korean furniture mostly popular in Tong Yeong in Gyeongnam province in Korea. He has adopted the technique in creating his furniture since he started learning and working the furniture making at sixteen years old. So he is only the cabinet maker with the technique in Tong Yeong GN. Samhojang, Seongtaenoemun, Gwuinoemun, and so on are the techniques inlaid in the furniture like Jang, Nong, Beoseonjang, Mungap and so on. The Tong-yeong techniques are even more difficult and take longer time than other ordinary inlays to be created, but they are very secured and last longer. And the techniques are very beautiful but today they are not well-known and used in Korea. Hence, the succession and preservation of the techniques are needed from the joiner to younger generation. Futhermore, the development on the easier and shorter process to create them is needed to be popular throughout Korea in order to be useful for contemporary furniture.

• Restorative Dentistry and Endodontics
• /
• 제10권1호
• /
• pp.63-70
• /
• 1984

It was the purpose of this study to determine the galvanic current between a gold alloy inlay and four types of amalgam using the circuit through pulp chambers when the freshly extracted teeth with those restorations were brought into contact in a physiologic saline solution, and to investigate the effectiveness of cavity varnish or ammonated silver-nitrate on the surface of amalgam restoration in reducing galvanic current. The current was measured with current-to-voltage converter and recored on a physiograph 6630-257. The following results were obtained. 1. Generally, galvanic current decreased as the time elapsed. 2. Galvainc current decreased significantly in the first day and after then minimal change was observed until 30th day. 3. Initial galvanic current was 29.6 ${\mu}A$ in the cut amalgam and 24.5 ${\mu}A$ in Dispersalloy amalgam and after then the current was significantly decreased. 4. Initial galvanic current was 12.6 ${\mu}A$ in spherical amalgam (low copper amalgam) and 13.8 ${\mu}A$ in Tytin amalgam and the amount of change was lower in sperical amalgam and Tytin amalgam than that in lathe cut amalgam and Dispersalloy amalgam. 5. Painting ammoniated silver-nitrate or Copalite on the surface of amalgam resotration decreased initial galvanic current and ammoniated silver-nitrate is more effective in decreasing galvanic current than Copalite. 6. Galvanic current by contact between amalgam restoration and gold restoration increased abruptly and dropped rapidly becoming almost.

• 대한치과기공학회지
• /
• 제12권1호
• /
• pp.5-14
• /
• 1990

The purpose of this study were to investigate the patterns of prosthetic restorations according to sex and age. We had surveyed the out-patents of dental clinics it Jeon-Ju, Iri and Gun roan area. The abtained result were as follow ; 1. The patterns of prosthetic restoration in female was higher than male and 20$\sim$30 age groups was higher than others. 2. The crown was higher in prosthetic restoration. 3. The procelain appliance area was high in male and female on 20$\sim$29 age. 4. The partial denture was higher than full denture in both sex. 5. The crown appliance area was not different in both sex. 6. The 3 unit bridge was higher than other bridge in both sex. 7. The porcelain appliance area was high in male and female on upper anterior. 8. The inlay appliance area of lower posterior was higher than upper posterior. 9. The upper posterior was high in male, and the lower posterior was high in female in partial denture. 10. The full dentur was high in old age group.