• 대한기계학회논문집B
• /
• 제30권5호
• /
• pp.413-421
• /
• 2006

The bubble dynamics induced by direct laser heating is experimentally analyzed as a first step to assess the technical feasibility of laser-based ink-jet technology. To understand the interaction between laser light and ink, the absorption spectrum is measured for various ink colors and concentrations. The hydrodynamics of laser-generated bubbles is examined by the laser-flash photography. When an Ar ion laser pulse (wavelength 488 nm) with an output power up to 600 mW is incident on the ink solution through a transparent window, a hemispherical bubble with a diameter up to ${\sim}100{\mu}m$ can be formed with a lifetime in a few tens of microsecond depending on the laser power and the focal-spot size. Parametric study has been performed to reveal the effect of laser pulse width, output power, ink concentration, and color on the bubble dynamics. The results show that the bubble generated by a laser pulse is largely similar to that produced by a thin-film heater. Consequently, the present work demonstrates the feasibility of developing a laser-actuated droplet generation mechanism for applications in ink-jet print heads. Furthermore, the results of this work indicate that the droplet generation frequency is likely to be further increased by optimizing the process parameters.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1892-1897
• /
• 2003

A new thermal inkjet printer head on SOI wafer with virtual valve was proposed. It was composed of two rectangular heaters with same size. So we could call it T-jet(Twin jet). T-jet has a lot of merits. It has the advantage of being fabricated with one wafer and is easy to change the size of chamber, nozzle, restrictor and so on. However, above all, It is the best point that T-jet has a virtual valve. And it was manufactured on SOI wafer. The chamber was formed in its upper silicon whose thickness was 40um. The chamber's bottom layer was silicon dioxide of SOI wafer and two heaters were located underneath the chamber's ceiling. And the restirctor was made beside the chamber. Nozzle was molded by process of Ni plating. Ni was 30um thick. Nozzle ejection test was performed by printer head having 56 nozzles in 2 columns with 600NPI(nozzle per inch) and black ink. It measured a drop velocity of 12m/s, a drop volume of 30pl, and a maximum firing frequency of 12KHz for single nozzle ejection. Throwing out the ink drop in whole nozzles at the same time, it was observed that the uniformity of the drop velocity and volume was less than 4%.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 The Korea-Japan Joint Symposium
• /
• pp.31-32
• /
• 2003

The fixation of reactive dyes onto cotton fabrics by means of dry heat treatment was examined in terms of water regain in fabrics. Dye liquors were applied to fabrics by ink-jet printer. The fixation strongly depended on water regain. At certain level of water regain the fixation showed stepwise increase. After this point the fixation reached to saturated value. The observed results were interpreted by the aggregation behavior of dyes and reactivity of hydroxyl group of cellulose depending on the amount of the surrounding water molecules. Urea molecules played a role of water at low water regain to increase the fixation.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.1390-1393
• /
• 2004

In the present industry, three-dimensional colored shape has required for realistic prototype in rapid manufacturing. Z-corporation developed 3D printer which can color three-dimensional prototype but this process can't be adopted to other rapid prototype products and spend much time and cost coloring 3D shape. In this study a new coloring process on three-dimensional surface is proposed for realistic prototype. Three-dimensional surface coloring apparatus is composed of HP ink jet head and X-Y plotter. Distance and angle between ink jet nozzle and 3D surface are set as process parameter. Based on the experiment of process parameters, it is shown that distance and angle affected on printed image on 3D surface. Circle and line shape are chosen as standard image shape because the shape has widely used as standard in 2D printing. Consequently, the distorted image on 3D surface is corrected by transformed input image data.

• 반도체디스플레이기술학회지
• /
• 제4권2호
• /
• pp.21-24
• /
• 2005

Ink-jetting characteristics of pulse width and pulse amplitude for a piezoelectric ink jet printer driver have been mapped with various polymer EL ink. In this study, the jetting characteristics have been classified into 4 regime; no Jetting, unstable jetting, stable jetting, and spraying, and the importance of fluid viscosity on the scope of the stable jetting regime has been emphasized. The relation between jetting speed and the width and amplitude of driving signal has also been investigated and the effect of the speed on the jetting characteristics has been discussed.

• 한국생산제조학회지
• /
• 제25권4호
• /
• pp.258-265
• /
• 2016

Digital printing has been used in various industrial areas, including semiconductor manufacturing and textile printing. However, implications on ceramic textile have not been well established so far. Printing high-viscosity materials requires an understanding of their behavior. An inorganic high viscous material with a viscosity range of 20-30 cps is analyzed using a viscometer and through X-ray diffraction. In this study, a digital printer is designed and assembled using a high-viscosity material with software for PC control, resulting in reduced processing at a fast area velocity of $20m^2/hr$. The present study demonstrated that the printer is capable of controlling the shape of the drop mass to smear ink smoothly onto the ceramic surface under an economic budget. In addition, to avoid any difficulty in color management, the ceramic printer is equipped with an independent color management system designed to cope with images on a highly viscous material.

• 한국염색가공학회지
• /
• 제19권2호
• /
• pp.24-31
• /
• 2007

This paper addresses factors of line image quality on grain leather printed via inkjet printer. Lines were printed onto coated leather media, and line width, edge blurriness, and edge raggedness were evaluated for line image quality. Various factors influenced to wetting and capillary wicking were studied and found out that wicking through capillary between fibers causes significant feathering on leather surface similar with pulp capillary in copy Paper. Polyurethane and acrylic resin coating resulted good image qualify by reducing capillary wicking. The mixture of polyurethane and acrylic resin applied on grain leather satisfied with both image quality and surface hand. $AllWrite^{TM}$ ink brought best results of image quality, comparing with $VeraPrint^{TM}$ ink and $JetWrite^{TM}$ ink.

• 한국인쇄학회지
• /
• 제14권2호
• /
• pp.37-49
• /
• 1996

The practical lith developer is a hydroquinone solution of moderate alkalinity and low free-sulfite ion concentration with potassium bromide as the restraining agent. In the study on composition of ilth developer to promote high sensitivity, high contrast and long term preservation or use, a new composition of lith developer, namely PK lith developer, was developed and of was found that PK lith developer was superior to the lith developer which was commercially available in terms of contrast, speed and preservation. This paper also describes studies on the addition of hdydrazine to PK lith developer, which have led to further improvements in the system.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1997년도 춘계학술발표회논문집(2)
• /
• pp.244-249
• /
• 1997

드럼 속의 폐기물 안에 포함되어있는 방사성 물질의 함량을 비파괴적으로 측정하는 방사성폐기물 핵종분석시스템을 개발하여 고리원자력발전소 제4폐기물 저장고에 설치하였다. 시스템은 그 기능에 따라 상위레벨과 하위레벨로 나누어지는데, 상위레벨인 중앙감시 및 제어시스템 Part에서 전체 시스템을 원활하게 운전되도록 감시 제어를 하고, 하위 레벨에서는 드럼을 운반하는데 사용하는 크레인 운전 Part, 측정위치에 올려진 드럼을 분석하는 핵종분석 Part, 드럼 핵종분석 결과를 회전하면서 드럼 표면에 인쇄하는 Ink-jet Printer Part 로 구분된다. 상위레벨의 제어실내 감시제어 PC는 하위레벨과 RS-232C 멀티포트를 사용하여 통신을 하는데, 드럼의 반입에서 반출까지의 전 과정은 자동화되어 운전된다.

• 청정기술
• /
• 제7권3호
• /
• pp.169-178
• /
• 2001

섬유염색은 전 세계적으로 매우 큰 시장이나, 염료를 사용하여 섬유염색을 수행하는 기존 인쇄 공정의 경우 염료의 손실 및 환경오염의 문제점을 갖고 있다. 기존 공정들의 경우 섬유 인쇄 시 전처리 및 후처리 공정이 필요하고 이들 공정에서 폐수가 발생하게 된다. 이런 문제점들의 해결방안으로 전처리 및 후처리 공정이 필요없고 잉크를 효율적으로 사용할 수 있는 잉크제트 프린팅 기법을 섬유염색 기술에 적용하려는 노력이 진행중이다. 섬유인쇄를 위해 잉크제트 프린터를 사용할 경우 안료를 사용하기 때문에 잉크는 액체 상에 고체입자가 분산되어 있는 서스펜션 상태로 존재한다. 분자역학 모사 기법과 유사한 Stokesian 역학 모사 방법을 사용한 전산모사를 통해 외부에서 가해진 압력구배에 의해 노즐 관에 흐르는 분산잉크 중의 입자 분포 및 속도 분포 변화를 살펴보았다. 전산모사결과 입자의 부피분율이 낮을수록, 평균 무차원 서스펜션 속도가 낮을수록, 노즐 관과 입자 크기 사이의 비(H/a)가 클수록 입자들의 분포가 상당히 균일한 것으로 나타났다. 따라서 잉크제트 프린팅 기법을 사용하여 섬유인쇄를 수행하는 경우, 노즐 관에의 유속을 작게 하고 노즐 관과 입자 사이의 크기 비를 크게 해야 균일한 인쇄 성능을 얻을 수 있을 것으로 판단된다.