• 반도체디스플레이기술학회지
• /
• 제14권2호
• /
• pp.23-27
• /
• 2015

In this paper, eco-friendly paper strain gauge was fabricated in the way of printing strain gauge on paper substrate, using PEDOT:PSS ink and inkjet printer technology. As a p-type conductive high polymer, PEDOT:PSS is known to be piezoresistive effect. I formed a strain gauge by connecting in parallel 5 lines of $60{\mu}m$ width printed with PEDOT:PSS. To minimize surrounding influence such as temperature, I formed wheat-stone bridge by combining 4 strain gauges (quarter-bridge strain gauge) which were made up of PEDOT:PSS 5 lines and measured. In quarter-bridge strain gauge, only two strain gauges, facing each other, arranged in strain and horizontal direction were deformed while the other two strain gauge of vertical direction were not. Therefore, quarter-bridge strain gauge showed the output of half bridge. The fabricated quarter-bridge strain gauge had output sensitivity of $105.6{\mu}V/V{\cdot}mm$ and its output linearity was relatively good.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권10호
• /
• pp.1232-1236
• /
• 2014

Numerical models of fluid dynamics inside the micro actuator chamber and nozzle are presented. The models include ink flow from reservoir, bubble formation and growth, ejection through the nozzle, and dynamics of refill process. Since high tapered nozzle is one of the very important parameters for overall actuator performance design. The effects of variations of nozzle thickness, diameter, and taper angles are simulated and some results are compared with the experimental results. It is found that the ink droplet ejection through the thinner and high tapered nozzle is more steady, fast, and robust.

• Journal of Welding and Joining
• /
• 제29권5호
• /
• pp.90-94
• /
• 2011

Ag metallic particles from nano-scale to submicron-scale are combined with organic solvent to provide fine circuits and interconnection. Ink-jet printing with Ag nano particle inks demonstrated the potentials of the new printed electronics technology. The bonding at the interface between the Ag wiring layer and the various substrates is very important. In this study, the details of interfaces in Ag wiring are investigated primarily by microstructure observation. By adjusting the materials and sintering conditions, nicely formed interfaces between Ag wiring and Cu, Au or organic substrates are achieved. In contrast, transmission electron microscope (TEM) image clearly shows interface debonding between Ag wiring and Sn substrate. Sn oxides are formed on the surface of the Sn plating. The formation of these is a root cause of the interface debonding.

• 한국분말재료학회지
• /
• 제15권2호
• /
• pp.81-86
• /
• 2008

최근프린팅기술은 전자부품소재 산업의 대형화 및 저가격화의 해법으로 기대되고 있다. 특히 전자부품소재 프린팅 기술 중 잉크젯공정은 최신 디스플레이용 전극소재, PCB, FPCB 및 기타 소재공정에 이용하려는 움직임이 활발히 진행되고 있다. 그러나 잉크젯 기술은 재료의존도 비중이 높은 기술로서 소재(금속잉크)의 개발이 최우선시 되어야한다. 전자부품소재용 금속잉크에 사용되는 금속 나노입자는 우수한 전기전도성과 산업적응용이 가능해야 한다. 따라서 최근 연구되고 있는 금속 나노입자의 연구결과 중 전자잉크에 적용 가능한 연구결과와 응용분야에 대하여 서술하였다.

• 한국결정성장학회지
• /
• 제24권4호
• /
• pp.169-175
• /
• 2014

최근 각광받고 있는 디지털 프린팅을 이용한 디자인 기법은 세밀한 표현과 다양한 이미지 구현이 가능하고, 원료의 낭비가 적어 효율성이 높은 장점을 가지고 있다. 디지털 프린팅 공정에서는 cyan, magenta, yellow, black이 기본적인 디지털 4원색으로 사용되며, 도자제품에 적용되는 세라믹 안료의 경우 $1000^{\circ}C$ 이상의 고온 소성이 가능하도록 우수한 열적, 유약 안정성과 발색 특성이 요구된다. 본 연구에서는 고상합성법을 이용하여 $CaO-SnO_2-Cr_2O_3-SiO_2$ 조성의 pink-red 고온발색 무기안료를 합성하였다. $Ca(Sn,Cr)SiO_5$ 세라믹 안료의 합성 조건에 따른 물성을 XRD, SEM, PSA, FT-IR를 이용하여 분석하였고, Cr 치환량 변화가 $Ca(Sn,Cr)SiO_5$ 무기 안료의 발색 거동에 미치는 영향을 Uv-vis.와 CIE 표색계 값($L^*a^*b^*$)을 기준으로 한 색도측정을 통해 관찰하였다.

• 한국전기전자재료학회논문지
• /
• 제35권1호
• /
• pp.18-23
• /
• 2022

이젯 프린팅은 직접적인 비접촉 마이크로 팹기술의 하나로서 노즐과 기판 사이에 강한 전기장을 가함으로써 넓은 범위의 마이크로/나노패턴 어레이를 구현할 수 있는 다목적 팹공정이다. 제조된 고분자/퀀텀닷 마이이크로 패턴의 모양과 두께는 자동화된 프린트 기계에 설치된 노즐 직경과 공정에 사용된 잉크 성분에 일반적으로 정밀한 의존성을 갖는다. 본 논문의 목적은 실험 결과에 영향을 미칠 수 있는 각각의 공정 변수 효과를 설명하기 위해서 이젯 프린팅된 고분자/퀀텀닷의 전형적인 실제 예를 설명하는데 있다. 여기서 우리는 마이크로/나노 해상도로 두께가 정밀하게 제어된 고분자/퀀텀닷 패턴을 제조할 수 있는 몇 가지 이젯 프린팅 공정을 구현하였다.

• 한국정밀공학회지
• /
• 제26권8호
• /
• pp.24-28
• /
• 2009

• 한국인쇄학회지
• /
• 제20권1호
• /
• pp.79-90
• /
• 2002

Recently, the research about color matching for the input/output devices of printing process is progressing rapidly by the digitization. The calibration method of flatbed scanner widely used as an input device for prepress process is especially important for color proofing of high quality color prints. In this paper, scanner calibration method using 3-dimensional look-up table and tetrahedral interpolation was examined and analysed comparatively on the three kinds of original copies, such as photograph, dye sublimation proof and ink jet print for IT8.T/2 target.

• 한국인쇄학회지
• /
• 제14권2호
• /
• pp.115-128
• /
• 1996

In this paper, we describe the Color Correction and Preferred Skin Color Reproduction in a ink-jet color printer. The fundamental color correction that converts RGB densities into GMY densities has been ordinarily used. This method can reduce the hue error, but color difference between the preferred skin colors and hardcopy skin colors are large. We have been able to reduce color differences between original skin color and hardcopy skin color by transforming hardcopy skin colors` coordinates into Preferred Skin Colors` coordinates. Experimental results show that the described method is useful and valid for the skin color reproduction in a digital color printer.

• 한국인쇄학회지
• /
• 제14권2호
• /
• pp.37-49
• /
• 1996

The practical lith developer is a hydroquinone solution of moderate alkalinity and low free-sulfite ion concentration with potassium bromide as the restraining agent. In the study on composition of ilth developer to promote high sensitivity, high contrast and long term preservation or use, a new composition of lith developer, namely PK lith developer, was developed and of was found that PK lith developer was superior to the lith developer which was commercially available in terms of contrast, speed and preservation. This paper also describes studies on the addition of hdydrazine to PK lith developer, which have led to further improvements in the system.