• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 한국염색가공학회 2004년도 추계학술발표회 논문집
• /
• pp.258-262
• /
• 2004

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.1163-1167
• /
• 2008

Since Samsung SDI and Sony started mass production of AM-OLED display for mobile/TV applications, OLED technology has emerged as leading candidate among the many technologies under development for next generation Flat panel displays. P-OLED (Polymer Organic Lighting Emitting Diode) technology, a class of OLED, is gathering momentum towards commercialization. P-OLED technology has made tremendous progress in terms of display performance (including life time, efficiency and color gamut) and in the maturity of ink jet printing process and equipment. In order to get into the mobile/TV application market successfully, P-OLED display technology must meet the following display makers' requirements: (1) P-OLED Display Performance in terms of lifetime, efficiency, and color coordinates, (2) Low Cost Manufacturing Technology such as "Solution Processable Printing Technology". P-OLED technology has already overcome many of the hurdles to mass manufacturing. In this paper, the latest developments in ink jet printing technology, including P-OLED material performance, is discussed.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1135-1138
• /
• 2006

By ink-jet printing method, organic thin-film transistors (OTFTs) having soluble 6,13-bis (triisopropylsilylethynyl) pentacene (TIPS pentacene) as an active material were fabricated. The TIPS pentacene solution was made with chlorobenzene and anisole. The solutions were printed on poly (4-vinylphenol) (PVP) dielectric layers and source/drain electrodes by piezo-type heads for bottom contact OTFTs. The dielectric layers had untreated or HMDS-treated conditions. The chlorobenzene device showed the highest field effect mobility of $0.016\;cm^2/Vs$ and the anisole HMDS-treated device shows the highest $I_{on}/I_{off}$ ratio of $10^5$.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.345-348
• /
• 2006

The piezoelectric thick films were fabricated on silicon substrates by screen printing method. By developing a low-temperature sinterable piezoelectric composition and a new poling technique, we fabricated the high-performance piezoelectric thick films on silicon which can be applied for piezoelectric MEMS applications such as micropumps of the ink jet printer heads.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1046-1049
• /
• 2005

We have developed polymer LED displays using ink jet printing without visible swathe marks which can be observed during display operation. In addition, we have also developed a single-pass printing technology for hole-conduction layer deposition to significantly reduce the complexity of interlacing printing across the panel which is known as an alternative to remove the swathe mark.

• Journal of Institute of Control, Robotics and Systems
• /
• 제10권4호
• /
• pp.317-324
• /
• 2004

The ink jet printer media advance system is required to be exactly driven to the target position via tracking the reference velocity profile to obtain the high quality print image. A single gain PID controller is not sufficient to fulfill the control objectives, the exact velocity tracking and the accurate positioning, at the same time. A dual PID controller and its switching strategy are presented in this paper to achieve the control objectives. The media advance system is controlled by two separate PID controllers, one of which is for velocity control, and the other is for position control. A PID controller controls the velocity of the media advance system until it reaches the predetermined switching position. When the media advance system passes the predetermined position, the controller is switched to the other PID controller which is more profitable for exact positioning. The switching position is determined by the estimated stop distance. The simulation and experimental results are presented to show the validity and effectiveness of the proposed controller.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.874-876
• /
• 2009

This is a report on fabrication and electrical characteristics of pentacene OTFT that uses conducting PEDOT/PSS as source drain electrodes. We demonstrate enhanced conductivity of PEDOT/PSS film with glycerol and optimize properties for ink jet printing. We also present the application of oxygen plasma technique in order to favor selective spreading for subsequent inkjet printing.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.2509-2512
• /
• 2005

In this paper, a position control scheme of the ink droplet is presented for the high image quality and print speed inkjet printer. The proposed scheme estimates the impact position and compensates it by control of the fire strobe time based on the dynamic equations describing the moving trajectory of the ink droplet. Compared to the conventional fire strobe control which is based on the simple synchronization the fire strobe with the position signal of the inkjet nozzle, the proposed control scheme provides more accurate impact position control during the carrier is moving with accelerated or decelerated speed as well as constant speed. The availability of printing during the acceleration and deceleration states of the carrier moving enables the print speed up and the frame size down which means the cost down.

• Journal of the Semiconductor & Display Technology
• /
• 제4권2호
• /
• pp.21-24
• /
• 2005

Ink-jetting characteristics of pulse width and pulse amplitude for a piezoelectric ink jet printer driver have been mapped with various polymer EL ink. In this study, the jetting characteristics have been classified into 4 regime; no Jetting, unstable jetting, stable jetting, and spraying, and the importance of fluid viscosity on the scope of the stable jetting regime has been emphasized. The relation between jetting speed and the width and amplitude of driving signal has also been investigated and the effect of the speed on the jetting characteristics has been discussed.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 한국펄프종이공학회 2002년도 추계학술발표논문집
• /
• pp.125-126
• /
• 2002