• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.559-560
• /
• 2006

Inkjet Printing is very attractive method for direct patterns with no masks, In order to Achieve direct printing with nano metal, It is often necessary to print them with highly concentrated Ink We research the High Concentrated silver nano ink. Formulation which has a good thermal stability and storage stability and jet stability using a ethylene glycol ether. Normally Alcohol-based inks can be sensitive But High boiling point ethylene glycol ether base Ink is creating a stable meniscus and minimum maintenance issues. We are reaching a 50~60wt% high Silver Ink using a Hydrophilic Ag Nano powder. (30~50nm)

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.34 no.2
• /
• pp.1-12
• /
• 2002

Starch dissolved in paper-mill wastes, either as a result of poor retention on the paper web or recycling of surface-treated broke, was a major pollutant Laboratory tests were performed by using different kinds of starch as a surface treatment. It was concluded that the use of cationic starch can positively affect the level of starch dissolved in liquid effluents. When cationically modified starches were used for surface sizing, the starch was tightly bound to the paper fibers, it was not removed during the repulping of broke. The result of mill trial in fine paper manufacture for the application of low-viscosity cationic starches used in size press reduced COD load in the effluents and increased One Pass Retention. It had been found that when cationic starch used as a surface sizing agent, more starch was retained on or near the surface of the sheet than with conventional oxidized starches. Thus surface strengths and quality were improved. In addition it is possible to maintain the desired level of starch penetration into the fiber net and improve porosity, opacity and brightness. In contrast, in most cases, dusting problems are notably eliminated. Cationic surface sized starch improved black and color ink-jet print quality in terms of feathering and optical density of the print image. These improved properties were believed to be due to a combination of fiber bonding and surface orientation more uniform starch concentration on the paper surface was resulted. Moreover cationic charges in the paper surface lend themselves excellently to fix ink jet ink anionic in nature.

• Electrical & Electronic Materials
• /
• v.11 no.4
• /
• pp.350-354
• /
• 1998

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2003.04a
• /
• pp.65-91
• /
• 2003

• 유체기계공업학회:학술대회논문집
• /
• 2005.12a
• /
• pp.106-110
• /
• 2005

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.332-332
• /
• 2010

We have successfully demonstrated the inkjet printing method to create $Al_2O_3$ films withouWe have successfully demonstrated the inkjet printing method to create $Al_2O_3$ films without a high temperature sintering process. In order to remove the coffee ring effect in the ink drop, we have introduced a co-solvent system in order to create Marangoni flow in the ink drop, which leads to the dense packing of ceramic powders on the substrate during inkjet process. The packing density of the Inkjet-printed $Al_2O_3$ films is around 60% (max. 70%) which is very high compared to the value obtained from the same material films by other conventional methods such as film casting, dip coating process, etc. The voids inside the films (which are around 40% of the entire film volume) are filled with the polymer resin (Cyanate ester) by the infiltration process. This resin infiltration is also implemented by the inkjet printing process right after the Ah03 film ink-jetting process. The microstructures of the printed $Al_2O_3$ films are investigated by Scanning Electron Microscope (SEM) to understand the degree of packing density in the printed films. The inkjet-printed $Al_2O_3$ films have been characterized to investigate its thickness and roughness. Quality factor of the printed $Al_2O_3$ film is also measured to be over 300 at 1MHz.

• Journal of Aerospace System Engineering
• /
• v.12 no.6
• /
• pp.1-8
• /
• 2018

ACF, which is used for the transparent electrode film is manufactured by the thermocompression method with conductive particles. However, the method has disadvantages since there are many wasted materials and the process is complex. To overcome the demerits of the conventional method, EHD printing technology with conductive particles ink is proposed. The line thickness of patterning is influenced by the characteristics of the inks and the printing conditions. Therefore, it is salient to find the most conducive conditions for the micro patterning. In this paper, the ink with conductive particles was manufactured, and the patterning results were obtained by varying the nozzle thickness and the flow rate. The electrical conductivity according to the ejection of the particles ink is obtained.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.25 no.1
• /
• pp.81-94
• /
• 2007

Recently, the trend in the printing industry includes shorter run lengths and with fast turnaround times. As new markets have made it possible to produce small quantities of high-quality color products at affordable price, the general commercial printing meets the customer's diverse demand by using spot color besides process four colors. Especially, by using spot color for printing the enterprise's logo or specific color, we can see the effect of printing is getting better. With the combination of the right software, ink, media, and device can be treated as a digital proofer for spot color printing, providing significant time and cost savings compared to conventional procedures. The objective of this study is to investigate the quality of spot color proofs printed by ink-jet and dye sublimation proofer using ICC-based color management system. An Epson Stylus Color 3000 ink-jet proofer combined with Best Color Proof XXL RIP was tested for glossy and matte paper. 3M Rainbow dye sublimation proofer was examined using 3M Rainbow controller ver. 4.1 RIP on the manufacturer recommended proofing paper. ICC profiles were generated for each device using ECI 2002 visual target and evaluated for the accuracy of process 4 color reproduction. The test charts consisting of Pantone color 1140 was selected to test the quality of spot color reproduction.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10a
• /
• pp.31-32
• /
• 2003

The fixation of reactive dyes onto cotton fabrics by means of dry heat treatment was examined in terms of water regain in fabrics. Dye liquors were applied to fabrics by ink-jet printer. The fixation strongly depended on water regain. At certain level of water regain the fixation showed stepwise increase. After this point the fixation reached to saturated value. The observed results were interpreted by the aggregation behavior of dyes and reactivity of hydroxyl group of cellulose depending on the amount of the surrounding water molecules. Urea molecules played a role of water at low water regain to increase the fixation.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.1390-1393
• /
• 2004

In the present industry, three-dimensional colored shape has required for realistic prototype in rapid manufacturing. Z-corporation developed 3D printer which can color three-dimensional prototype but this process can't be adopted to other rapid prototype products and spend much time and cost coloring 3D shape. In this study a new coloring process on three-dimensional surface is proposed for realistic prototype. Three-dimensional surface coloring apparatus is composed of HP ink jet head and X-Y plotter. Distance and angle between ink jet nozzle and 3D surface are set as process parameter. Based on the experiment of process parameters, it is shown that distance and angle affected on printed image on 3D surface. Circle and line shape are chosen as standard image shape because the shape has widely used as standard in 2D printing. Consequently, the distorted image on 3D surface is corrected by transformed input image data.