• 제목/요약/키워드: Injection-rate

검색결과 2,678건 처리시간 0.027초

비산업 연소 사업장 배출 가스상 미세먼지와 휘발성 유기 화합물 제거를 위한 가압수식 미세먼지 제거 장치 연구 (A Study on the Fine Dust Removal Equipment of Pressurized Water type for the Removal of Exhaust Gas Fine Dust and Volatile Organic Compounds from the Non-industrial combustion plant)

  • 윤재서;김상민;이예지;노성여
    • 한국산학기술학회논문지
    • /
    • 제19권11호
    • /
    • pp.506-512
    • /
    • 2018
  • 가정과 요식업 사업장에서 발생하는 미세먼지는 전체 미세먼지 배출량의 약 4%정도로 낮은 비율을 차지하고 있다. 하지만 요식업 사업장에서는 일시적 미세먼지 농도가 최대 60배 가까이 측정될 만큼 오염농도의 변화율이 매우 높다. 비산업 연소 사업장에서 발생하는 오염 물질은 입자상 미세먼지와 가스상 유기화합물로 구성되며, 이 오염물질을 제거하기 위해서 여러 집진원리 중 가스상 물질과 입자상 물질의 동시 제거에 효과적인 시스템인 세정집진을 적용하였다. 이는 이류체 분무 노즐을 이용한 가압수식 액체 분사 방법으로 브라운 운동의 확산 포집의 확률을 높인 방법이다. 제작된 미세먼지 제거 장치를 이용하여 노즐 분무 기압 조건과 각도 등에 따른 미세먼지 집진 시스템의 집진 효율성을 분석하였으며, 그 결과 미세먼지와 가스상 유기화합물 제거효율이 90% 이상을 만족하는 것을 확인하였다. 개발된 시스템은 기존 사업장 후드 시스템에 별도의 설치비용 없이 미세먼지 집진 제거가 가능하여 향후 높은 활용성이 기대된다.

산업별 혁신시스템과 R&D 지원서비스 : 엔유씨전자 사례를 중심으로 (Sectoral System of Innovation and R&D Support Service: Focused on the Case of NUC Electronics)

  • 김용열
    • 기술혁신학회지
    • /
    • 제22권3호
    • /
    • pp.362-381
    • /
    • 2019
  • 본 논문에서는 기술혁신에 영향을 미치는 요인 중 산업별 혁신시스템과 R&D 지원서비스의 요인이 엔유씨전자의 사례에서 어떻게 작용하는지 살펴보았다. 엔유씨전자는 투입구 변경과 착즙률 개선의 기술혁신을 통해 높은 혁신성과를 달성하였다. 이는 산업별 혁신시스템의 각 구성요소가 엔유씨전자의 기술혁신과 부합하는 측면이 있었기 때문이다. 엔유씨전자의 성과향상은 자체적인 혁신노력과 함께 정부출연연구소의 R&D 지원서비스가 있었기 때문에 가능했다. 기술혁신 과정에서 제품설계와 가상실험 등 기업 스스로 해결할 수 없는 영역의 고차원적인 서비스를 받을 수 있었다. 중소기업에게 부족한 부분을 보완해주는 정부와 공공기관의 지원 역할이 중요했다고 할 수 있다. 산업별 혁신시스템의 각 구성요소별로 보면 새로운 기술기회가 많은 만큼 지속성이 낮다, 모방이 쉽고 전유성이 낮지만 복합적인 측면도 있다, 기술축적의 누적성은 비교적 높은 편이다, 외부지식의 활용 가능성이 높다, 주체와 네트워크 모두 중요한 역할을 하였다, 시장여건이 매우 유리하였다 등으로 요약될 수 있다. R&D 지원서비스의 측면에서는 직접적인 효과로서 스크류의 재질과 형상에 대한 가상실험을 통해 엄청난 시간과 비용의 절약이 이루어졌다는 점을 들 수 있다. 간접적인 효과로서는 외부지원에 의한 기술개발을 계기로 엔유씨전자의 자체적인 핵심역량이 크게 강화되었고 혁신의 선순환구조가 정착되었다는 점을 들 수 있다.

EWP 성능 검사를 위한 열 충격 모사시스템 (A Heat Shock Simulation System for Testing Performance of EWP)

  • 유남현
    • 한국전자통신학회논문지
    • /
    • 제14권3호
    • /
    • pp.553-558
    • /
    • 2019
  • 보쉬와 ZF 등과 같은 글로벌 자동차 부품 회사들은 친환경차 핵심 부품 중의 하나인 EWP (Electric Water Pump)에 대한 개발에 노력을 기울이고 있다. 친환경 자동차에서는 내연기관 엔진과 연동되던 쿨링 시스템보다는 내연기관 엔진에 독립적인 쿨링 시스템을 주로 사용한다. 이에 엔진과 별도로 작동되는 워터 펌프에 대한 연구개발 및 관련 생산 시스템에 대한 연구가 활발하게 진행되고 있다. 글로벌 부품 회사인 G사에서는 사출 방식에 적합한 PPS 재질의 EWP 단점을 극복하고자 SUS로 둘러싼 EWP를 연구 및 개발하였으며, 양산에 들어가기 위하여 로봇 기반의 생산 장비를 개발 중에 있다. 본 논문에서는 생산된 EWP의 성능을 테스트하기 위하여 로봇 기반의 생산 시스템과 연동되는 열 충격 모사 시스템을 설계 및 구현하였다. 이 시스템을 활용하게 되면 실제 환경과 비슷한 환경에서의 EWP를 테스트함으로써 제품의 불량률을 줄일 수 있는 장점을 가질 수 있다. 동시에 테스트를 위한 모사 전 과정에서 생산된 모든 데이터를 저장함으로써 향후 빅 데이터 기반의 EWP 시스템의 CPS(: Cyber Physical System) 개발에 활용될 수 있다.

Removal of residual VOCs in a collection chamber using decompression for analysis of large volatile sample

  • Lee, In-Ho;Byun, Chang Kyu;Eum, Chul Hun;Kim, Taewook;Lee, Sam-Keun
    • 분석과학
    • /
    • 제34권1호
    • /
    • pp.23-35
    • /
    • 2021
  • In order to measure the volatile organic compounds (VOCs) of a sample which is too large to use commercially available chamber, a stainless steel vacuum chamber (VC) (with an internal diameter of 205 mm and a height of 50 mm) was manufactured and the temperature of the chamber was controlled using an oven. After concentrating the volatiles of the sample in the chamber by helium gas, it was made possible to remove residual volatile substances present in the chamber under reduced pressure ((2 ± 1) × 10-2 mmHg). The chamber was connected to a purge & trap (P&T) using a 6 port valve to concentrate the VOCs, which were analyzed by gas chromatography-mass spectrometry (GC-MS) after thermal desorption (VC-P&T-GC-MS). Using toluene, the toluene recovery rate of this device was 85 ± 2 %, reproducibility was 5 ± 2 %, and the detection limit was 0.01 ng L-1. The method of removing VOCs remaining in the chamber with helium and the method of removing those with reduced pressure was compared using Korean drinking water regulation (KDWR) VOC Mix A (5 μL of 100 ㎍ mL-1) and butylated hydroxytoluene (BHT, 2 μL of 500 ㎍ mL-1). In case of using helium, which requires a large amount of gas and time, reduced pressure ((2 ± 1) × 10-2 mmHg) only during the GC-MS running time, could remove VOCs and BHT to less than 0.1 % of the original injection concentration. As a result of analyzing volatile substances using VC-P&T-GC-MS of six types of cell phone case, BHT was detected in four types and quantitatively analyzed. Maintaining the chamber at reduced pressure during the GC-MS analysis time eliminated memory effect and did not affect the next sample analysis. The volatile substances in a cell phone case were also analyzed by dynamic headspace (HT3) and GC-MS, and the results of the analysis were compared with those of VC-P&T-GC-MS. Considering the chamber volume and sample weight, the VC-P&T configuration was able to collect volatile substances more efficiently than the HT3. The VC-P&T-GC-MS system is believed to be useful for VOCs measurement of inhomogeneous large sample or devices used inside clean rooms.

다양한 파쇄 유체별 파쇄압력, 투과도 증진 및 균열전파에 관한 실험적 연구 (Experimental Study on Fracture Pressure, Permeability Enhancement and Fracture Propagation using Different Fracture Fluids)

  • 최준형;이현석;김도영;남정현;이대성
    • 터널과지하공간
    • /
    • 제31권1호
    • /
    • pp.41-51
    • /
    • 2021
  • 치밀 저류층의 투과도 증진을 위해 개발된 수압파쇄 기술은 셰일가스와 같은 비전통자원과 심부지열 개발에 필수적인 기술 중 하나이다. 파쇄형태가 단순하고 파쇄효율이 좋지 않은 수압파쇄를 개선하기 위해 다양한 파쇄유체를 이용한 실험적 연구가 진행되었다. 물, N2, CO2 가스를 파쇄유체로 사용하여 치밀 암석에 대한 파쇄형태와 효율성을 분석하였다. 파쇄유체로 물을 일정 주입속도로 주입한 경우 순간적으로 압력이 상승하여 파쇄가 발생하였으나, 파쇄유체로 가스를 주입한 경우 서서히 압력이 증가되면서 물보다 낮은 파쇄압력을 보였다. 3D 단층촬영 기법을 이용하여 물과 가스 주입으로 생성된 균열을 관찰한 결과는 기존 공극부피 대비 파쇄 자극부피가 각각 5.71%(물), 12.72%(N2), 43.82%(CO2) 증가되었다. 또한 파쇄유체의 파쇄 효율성을 검정하기 위한 파쇄 전후 투과도 변화 실험에서는 가스 파쇄에 의해 증가되는 투과도 증가 값이 물을 이용한 파쇄보다 훨씬 높게 측정되었다. 파쇄 이후 인공균열의 생성과 주변응력에 의해 다시 균열이 닫히는 현상을 고려하여 생성된 인공균열에 구속압을 단계별로 증가시켜 투과도 변화를 측정하였다. 구속압이 2MPa에서 10MPa로 증가시켰을 경우 초기 투과도 대비 각각 89%(N2), 50%(CO2) 감소하였다. 본 연구는 가스파쇄기술이 수압파쇄보다 투과도 증진 효과가 크고 이후 주변 응력에 의한 투과도 감소가 적은 것으로 나타났다.

한우 공란우 및 생체내 난자 회수(ovum pick-up) 조건이 체외수정란의 발달에 미치는 효과 (Effects of donors and in vivo ovum pick-up conditions on in vitro embryo development in Korean native cow)

  • 박용수;공준호;이준구;오동엽;정기화
    • 한국동물위생학회지
    • /
    • 제44권4호
    • /
    • pp.227-237
    • /
    • 2021
  • Artificial insemination of Korean native cattle (KNC) is the predominant method for breed improvement. However, industrialization of embryo production and transfer is necessary to utilize the genetic potential of KNC. The aim of this study was to examine associations between KNC donor cows and ovum pick-up (OPU) conditions, in-vivo oocyte recovery, and embryo development. Oocyte recovery and blastocyst development rates were higher at 50 and 60 mmHg OPU vacuum pressure than at 40 mmHg, which was, however, not significant. Regarding follicle growth, injection of 500 ㎍ GnRH 36 hours before OPU significantly increased the number of OPU oocytes from an average of 4.6 to 7.6 (P<0.05); no significant difference in embryo development rates was observed. Significant differences were observed in the numbers of OPU oocytes, embryo development rates, and transplantable blastocysts per individual among nine KNC donors (P<0.05). Furthermore, although there was no difference in OPU oocyte recovery intervals in approximately 2~8 weeks, the number of recovered oocytes significantly decreased at the 12-week interval (P<0.05); there was no difference in embryo development rates. The number of oocytes and embryonic development rates only tended to decrease until the seventh OPU session, but decreased significantly until the eighth session (P<0.05). The average pregnancy rate after transfer of OPU-derived in-vitro embryos into recipient cows was 41.8%. To improve the efficiency of OPU egg recovery and in-vitro embryo production, considering KNC donor characteristics, vacuum pressure of 60 mmHg, GnRH pretreatment to induce follicle growth, and effective OPU egg recovery up to seven times at intervals of 2~4 weeks appears to be most suitable. This study may facilitate the industrialization of KNC embryo production and transfer using high-quality cows.

Addition of 2 mg dexamethasone to improve the anesthetic efficacy of 2% lidocaine with 1:80,000 epinephrine administered for inferior alveolar nerve block to patients with symptomatic irreversible pulpitis in the mandibular molars: a randomized double-blind clinical trial

  • Aggarwal, Vivek;Ahmad, Tanveer;Singla, Mamta;Gupta, Alpa;Saatchi, Masoud;Hasija, Mukesh;Meena, Babita;Kumar, Umesh
    • Journal of Dental Anesthesia and Pain Medicine
    • /
    • 제22권4호
    • /
    • pp.305-314
    • /
    • 2022
  • Introduction: This clinical trial aimed to evaluate the anesthetic effect of the addition of 2 mg (4 mg/ml) of dexamethasone to 2% lidocaine (plain or with 1:80,000 epinephrine). The solutions were injected for a primary inferior alveolar nerve block (IANB) to provide mandibular anesthesia for the endodontic treatment of mandibular molars with symptomatic irreversible pulpitis. Methods: In a double-blinded setup, 124 patients randomly received either of the following injections: 2% lidocaine with 1:80,000 epinephrine, 2% lidocaine with 1:80,000 epinephrine mixed with 2 mg dexamethasone, or plain 2% lidocaine mixed with 2 mg dexamethasone, which were injected as a primary IANB. Ten minutes after injection, patients with profound lip numbness underwent electric and thermal pulp sensibility tests. Patients who responded positively to the tests were categorized as "failed" anesthesia and received supplemental anesthesia. The remaining patients underwent endodontic treatment using a rubber dam. Anesthetic success was defined as "no pain or faint/weak/mild pain" during endodontic access preparation and instrumentation (HP visual analog scale score < 55 mm). The effect of the anesthetic solutions on the maximum change in heart rate was also evaluated. The Pearson chi-square test at 5% and 1% significance was used to analyze anesthetic success rates. Results: The 2% lidocaine with 1:80,000 epinephrine, 2% lidocaine with 1:80,000 epinephrine mixed with 2 mg dexamethasone, and plain 2% lidocaine mixed with 2 mg dexamethasone groups had anesthetic success rates of 34%, 59%, and 29%, respectively. The addition of dexamethasone resulted in significantly better results (P < 0.001, 𝛘2 = 9.07, df = 2). Conclusions: The addition of dexamethasone to 2% lidocaine with epinephrine, administered as an IANB, can improve the anesthetic success rates during the endodontic management of symptomatic mandibular molars with irreversible pulpitis.

The role of discoid domain receptor 1 on renal tubular epithelial pyroptosis in diabetic nephropathy

  • Zhao, Weichen;He, Chunyuan;Jiang, Junjie;Zhao, Zongbiao;Yuan, Hongzhong;Wang, Facai;Shen, Bingxiang
    • The Korean Journal of Physiology and Pharmacology
    • /
    • 제26권6호
    • /
    • pp.427-438
    • /
    • 2022
  • Pyroptosis, a form of cell death associated with inflammation, is known to be involved in diabetic nephropathy (DN), and discoid domain receptor 1 (DDR1), an inflammatory regulatory protein, is reported to be associated with diabetes. However, the mechanism underlying DDR1 regulation and pyroptosis in DN remains unknown. We aimed to investigate the effect of DDR1 on renal tubular epithelial cell pyroptosis and the mechanism underlying DN. In this study, we used high glucose (HG)-treated HK-2 cells and rats with a single intraperitoneal injection of streptozotocin as DN models. Subsequently, the expression of pyroptosis-related proteins (cleaved caspase-1, GSDMD-N, Interleukin-1β [IL-1β], and interleukin-18 [IL-18]), DDR1, phosphorylated NF-κB (p-NF-κB), and NLR family pyrin domain-containing 3 (NLRP3) inflammasomes were determined through Western blotting. IL-1β and IL-18 levels were determined using ELISA. The rate of pyroptosis was assessed by propidium iodide (PI) staining. The results revealed upregulated expression of pyroptosisrelated proteins and increased concentration of IL-1β and IL-18, accompanied by DDR1, p-NF-κB, and NLRP3 upregulation in DN rat kidney tissues and HG-treated HK-2 cells. Moreover, DDR1 knockdown in the background of HG treatment resulted in inhibited expression of pyroptosis-related proteins and attenuation of IL-1β and IL-18 production and PI-positive cell frequency via the NF-κB/NLRP3 pathway in HK-2 cells. However, NLRP3 overexpression reversed the effect of DDR1 knockdown on pyroptosis. In conclusion, we demonstrated that DDR1 may be associated with pyroptosis, and DDR1 knockdown inhibited HG-induced renal tubular epithelial cell pyroptosis. The NF-κB/NLRP3 pathway is probably involved in the underlying mechanism of these findings.

Safety and efficacy of target controlled infusion administration of propofol and remifentanil for moderate sedation in non-hospital dental practice

  • Douglas Lobb;Masoud MiriMoghaddam;Don Macalister;David Chrisp;Graham Shaw;Hollis Lai
    • Journal of Dental Anesthesia and Pain Medicine
    • /
    • 제23권1호
    • /
    • pp.19-28
    • /
    • 2023
  • Background: Fearful and anxious patients who find dental treatment intolerable without sedative and analgesic support may benefit from moderate sedation. Target controlled infusion (TCI) pumps are superior to bolus injection in maintaining low plasma and effect-site concentration variability, resulting in stable, steady-state drug concentrations. We evaluated the safety and efficacy of moderate sedation with remifentanil and propofol using TCI pumps in non-hospital dental settings. Methods: A prospective chart review was conducted on 101 patients sedated with propofol and remifentanil using TCI pumps. The charts were completed at two oral surgeons and one general dentist's office over 6 months. Hypoxia, hypotension, bradycardia, and over-sedation were considered adverse events and were collected using Tracking and Reporting Outcomes of Procedural Sedation (TROOPS). Furthermore, patient recovery time, sedation length, drug dose, and patient satisfaction questionnaires were used to measure sedation effectiveness. Results: Of the 101 reviewed sedation charts, 54 were of men, and 47 were of women. The mean age of the patients was 40.5 ±18.7 years, and their mean BMI was 25.6 ± 4.4. The patients did not experience hypoxia, bradycardia, and hypotension during the 4694 min of sedation. The average minimum Mean Arterial Pressure (MAP) and heartbeats were 75.1 mmHg and 60.4 bpm, respectively. 98% of patients agreed that the sedation technique met their needs in reducing their anxiety, and 99% agreed that they were satisfied with the sedation 24 hours later. The average sedation time was 46.9 ± 55.6 min, and the average recovery time was 12.4 ± 4.4 min. Remifentanil and propofol had mean initial effect-site concentration doses of 0.96 µ/.ml and 1.0 ng/ml respectively. The overall total amount of drug administered was significantly higher in longer sedation procedures compared to shorter ones, while the infusion rate decreased as the procedural stimulus decreased. Conclusion: According to the results of this study, no patients experienced adverse events during sedation, and all patients were kept at a moderate sedation level for a wide range of sedation times and differing procedures. The results showed that TCI pumps are safe and effective for administering propofol and remifentanil for moderate sedation in dentistry.

Flat TDR 시스템을 이용한 지반의 물리적 특성 및 전단파속도 예측 (Prediction of Physical Properties and Shear Wave Velocity of the Ground Using the Flat TDR System)

  • 정찬욱;김대현
    • 지질공학
    • /
    • 제32권1호
    • /
    • pp.173-191
    • /
    • 2022
  • 본 연구에서는 Flat TDR을 이용하여 지반의 전단파속도를 측정하였고 측정값의 정밀도 분석 및 현장적용성에 대한 검증을 수행하였다. Flat TDR 내 결합되어 있는 Piezo-stack을 이용하여 현장에서의 전단파속도 측정값을 도출하였고, 도출한 값의 검증을 위해서 들밀도시험, 동적콘관입시험(DCPT), 문헌조사 등을 적용하여 비교·분석하였다. 실험결과 그라우트재 주입시 재령 초기 전단파속도 변화의 평균값은 10.15 m/s이며, 7~14일차 이후의 전단파속도 변화의 평균값은 65.99 m/s로 재령일 증가하는 경향을 보였다. 또한 OMC를 기준으로 건조 측에서는 함수비가 증가할수록 건조밀도와 전단파속도가 증가하고, 습윤 측에서는 함수비가 증가할수록 건조밀도와 전단파속도가 감소하는 것을 알 수 있었다. 현장시험 결과 도출된 전단탄성계수 값이 최소 17.36 MPa에서 최대 28.13 MPa로 확인되어 참고문헌 값과 유사한 측정값을 확인하였다. 이를 통해 Flat TDR을 이용한 전단탄성계수의 측정값이 신뢰성이 있는 데이터임을 알 수 있고, 추후 현장 지반의 다짐관리를 효과적으로 할 수 있음을 판단할 수 있다.