• 제목/요약/키워드: Injection-locking

Search Result 74, Processing Time 0.018 seconds

Effectiveness of Acupuncture and Acupotomy for Trigger Finger: A Systematic Review and Meta-Analysis

  • Hae-Won Hong;Myung-In Jeong;Hyun-Il Jo;Sun-Ho Lee;Ka-Hyun Kim;Sung-Won Choi;Jae-Won Park;Ji-Su Ha
    • Journal of Acupuncture Research
    • /
    • 제40권2호
    • /
    • pp.111-128
    • /
    • 2023
  • Trigger finger is a common cause of hand disability that results in finger catching, clicking, or locking. Conventional treatment options such as medication, injection, and surgery have limitations. Studies have indicated that acupuncture and acupotomy can be effective in treating trigger finger. However, no review regarding these treatment modalities has been published yet. This review included randomized controlled trials published until January 2023, investigating acupuncture-related interventions. The primary outcomes of interest included the effectiveness rate (ER) and pain intensity, measured using a visual analog scale (VAS) and Numerical Rating Scale (NRS), and secondary outcomes were the Quinnell grade (QG) and recurrence rate (RR). Adverse events (AEs) have also been reported wherever available. Overall, 19 studies were included, and results demonstrated that arcedge acupuncture improved the ER and QG and reduced NRS, and acupuncture was effective in reducing VAS. Compared with conventional surgery, acupotomy alone improved the ER and QG and lowered VAS and RR, with relatively fewer AEs. Acupotomy add-on treatment was more effective than conventional treatment; however, careful interpretation is needed for VAS. Acupotomy add-on treatment was more effective than acupotomy alone. However, the overall results must be interpreted with caution because of study quality, small sample size, and heterogeneity of the results.

농용(農用) 디이젤 엔진 연료(燃料)로서의 에타놀 이용(利用)에 관(關)한 연구(硏究) (Technical Feasibility of Ethanol as a Fuel for Farm Diesel Engines)

  • 유관희;배영환;유수남
    • Journal of Biosystems Engineering
    • /
    • 제6권2호
    • /
    • pp.1-8
    • /
    • 1982
  • The objective of this study was to find out the technical feasibility of ethanol-diesel fuel blends as a diesel engine fuel. Fuel properties essential to the proper operation of a diesel engine were determined for blends containing several concentrations of ethanol in No. 2 diesel fuel. A single-cylinder diesel engine for a power tiller was used for the engine tests, in which load, speed and fuel consumption rate were measured. The fuels used in tests were No. 2 diesel fuel and a blend containing 10-percent ethanol and 90-percent No. 2 diesel fuel. The results of the study are summarized as follows. 1. It was not possible to blend ethanol and No. 2 diesel fuel as a homogeneous solution even though anhydrous ethanol was used. The problem of blending ethanol in No. 2 diesel fuel could be solved by adding butanol about 5% of the amount of ethanol in the blends. 2. Because ethanol had a much lower boiling point ($78.3^{\circ}C$ under atmospheric pressure) than a diesel fuel, it was necessary to store ethanol-diesel fuel blends airtight in order to prevent them from evaporation losses of ethanol. 3. The addition of ethanol to No. 2 diesel fuel lowered the fuel viscosity and the cetane rating, but a blend of 10% ethanol and 90% diesel fuel had a viscosity and a cetane rating well above the KS minimum values for No. 2 diesel fuel. 4. At the rated speed, the specific fuel consumption of No.2 diesel fuel was lower than that of the 10% ethanol blend for the almost entire range of load. However, under the overload condition the specific fuel consumption was lower for the 10% ethanol blend. 5. Under the variable-speed full-load tests, both fuels produced approximately the same torque and power. At the speeds of 1600rpm or below, the specific fuel consumption of No. 2 diesel fuel was lower than that of the 10% ethanol blend. At the speeds of 1600rpm or above, however, the specific fuel consumption was lower for the 10% ethanol blend. 6. At the ambient temperature above $15^{\circ}C$, the use of the 10% ethanol blend in the engine created a vapor lock in the fuel injection pump and stalled the engine. The vapor locking problem was overcome by chilling the surroundings of the fuel injection pump and the cylinder head with water.

  • PDF

장거리 전송 파장분할 다중방식 수동형 광가입자망을 이용한 메트로망과 가입자망 통합 방안 (Consolidation of Metro Networks and Access Networks by using Long-reach WDM-PON)

  • 이상묵;문실구;김민환;이창희
    • 대한전자공학회논문지TC
    • /
    • 제43권5호
    • /
    • pp.59-67
    • /
    • 2006
  • 외부에서 주입된 비간섭성 광원 (BLS: Broadband Light Source)에 파장 잠김된 패브리 페롯 레이저 다이오드(wavelength-locked F-P LD: wavelength-locked Fabry-Perot Laser Diode)를 광원으로 사용해서 50 GHz의 채널 간격을 갖는 양방향 장거리 저송 35 채널 고밀도 파장분할 다중방식 수동형 광 가입자망 (DWDM-PON: Dense Wavelength Division Multiplexing-Passive Optical Network)을 구현한다. 장거리 전송을 위해 F-P LD의 발진 모드를 제어하여 F-P LD에 주입이 요구되는 BLS 파워를 감소시키면서 출력 파워를 높인다. 결과적으로 광 증폭기의 사용 없이 70 km 단일 모드 광섬유를 통해 가입자당 100 Mb/s 이상의 대역폭을 제공하면서 모든 상하향 70 채널에서 손실 없이 이더넷 패킷을 전송하였다. 구현된 장거리 저송 DWDM-PON은 다수의 중앙국을 바이패스(Bypass)함으로써 메트로망과 가입자망을 통합할 수 있다. 또한, 구현한 DWDM-PON은 상용의 어븀 첨가 광섬유 증폭기를 광대역 광원으로 사용하여 80 가입자를 수용할 수 있으며, 반도체 광대역 광원을 사용하면, 100 가입자 이상의 수용이 가능하다.

희석된 헤파린과 생리식염수가 간헐적 말초정맥장치의 폐색, 유지기간 및 정맥염 발생에 미치는 영향 (Efficacy of 1:1000 Diluted Heparin versus 0.9% Normal Saline for Maintenance of Intermittent Intravenous Locks)

  • 박미미;김창희;조은숙;이미정;김혜숙
    • 기본간호학회지
    • /
    • 제7권2호
    • /
    • pp.208-221
    • /
    • 2000
  • The objective of this research was to compare the flushing effects using 1:1,000 diluted heparin or 0.9% normal saline in relation to needle gauge and frequency of IV medications. The comparative categories were clotting, duration of patency, and incidence of phlebitis. The design of research was a Nonequivalent Control group, Post test, Nonsynchrorized Design. The independent variable was 0.9% normal saline flushing the IV locks and the dependent variables were clotting, duration of patency, and incidence of phlebitis. Subjects were medical-surgical inpatients over 15 years old and with peripherally placed IVs who were hospitalized in a university medical center. Exclusion criteria included foreigners and those who were rejected for this research. The final sample for data analysis included 295 IV sites in 194 patients; 154 were in the saline group and 141 were in the heparin group. Subjects were assigned to have IV locks is flushed with 0.9% normal saline in the experimental group and to have IV lock flushed with 1:1,000 diluted heparin(100 units) in the control group. In order to increase reliability, the nurses who were assigned to the units involved in the study received an explanation on the standard method for locking an IV, recording method for observational data and criteria for the detection of phlebitis. Data were collected for a period of 2 weeks, from March 16, 2000 to March 29, 2000. Total duration of IV was defined the time of IV insertion to the time of discontinuation. Phlebitis was defined as the presence of the following : pain, swelling. erythema at the insertion site. Chi-square was used to determine the association between the degree of clotting, duration of patency, and incidence of phlebitis for the diluted heparin or the normal saline and needle gauge and frequency of IV medications. The results are summarized as follows : (a) There was difference in the degree of clotting between two groups($X^2=5.882$, p=.015). (b) There was no difference in the degree of duration of patency between two groups($X^2=2.439$, p=.295). (c) There was no difference in the incidence of phlebitis between two groups($X^2=0.190$, p=.663). (d) There was difference in the degree of clotting($X^2=6.209$, p=.013) and in the degree of duration of patency($X^2=6.978$, p=.031) according the needle guage between the two groups. (e) There was difference in the incidence of phlebitis($X^2=5.008$, p=.025) according to the frequencies of IV injection between two groups.

  • PDF