• 한국추진공학회지
• /
• 제24권1호
• /
• pp.17-23
• /
• 2020

달 탐사에서 발사체 상단은 주로 저궤도에 투입된 탐사선을 38만 km의 거리에 있는 달까지 투입해주는 역할을 한다. 국외의 경우 상단(Upper Stage)은 달 탐사선을 지구-달 전이궤적에 투입 후 탐사선과 분리되고, 달 탐사선은 그 이후 자체 추진제를 이용하여 중간 경로 수정 기동 및 달 궤도 진입을 수행한다. 본 연구는 새롭게 제시되는 소형 액체상단을 기술하였다. 습질량이 총 2.9톤인 액체상단을 이용할 경우 달 탐사선을 지구-달 전이궤적 투입뿐만 아니라 달 궤도 진입까지 수행할 수 있다. 본 연구는 나로 우주센터에서 발사할 경우를 기준으로 허용 가능한 달 탐사선의 질량 범위를 도출하고, 탐사선의 허용 가능한 임무 범위도 다양하게 기술하고자 한다.

• The Korean Journal of Pain
• /
• 제20권1호
• /
• pp.40-45
• /
• 2007

Background: Caudal block is useful when anesthesia for surgery or treatment for chronic pain is needed, but this procedure has a failure rate of up to 25% even when it performed byan experienced physician. This high failure rate is usually due to improper needle placement. Methods: After gaining approval of the ethics committee, 46 patients received caudal blocks under ultrasound guidance; these were performed after the anatomical structures in the sacral hiatus had been measured with ultrasound. All these procedures were performed by the same anesthesiologist. The position and direction of the needle were identified using fluoroscopy by injecting a radio-opaque contrast through the needle. The time taken from thelidocaine injection to verification of the needle was measured and the planned nerve block was then carried out. Results: All cases of needle insertion into the sacral canal under ultrasound guidance were successful. The average duration of the procedure and the trial count were $134.1{\pm}10.1seconds$ and $1.2{\pm}0.1$, respectively. In 12 of the 46 cases (26%), the needle deviated either left or right in the sacral canal, so the direction of the needle had to be adjusted. The distance between two cornua, the depth of the sacral hiatus and the thickness and length of the sacrococcygeal ligament were $17.1{\pm}0.4$, $3.9{\pm}0.3$, $2.3{\pm}0.1$ and $24.9{\pm}0.9mm$, respectively. Conclusions: Ultrasound guidance can increase the success rate of inserting a needle into the sacral canal. However, even when ultrasound is used, the needle can deviate either left or right in the sacral canal.

• The Korean Journal of Pain
• /
• 제27권2호
• /
• pp.178-185
• /
• 2014

Epidural adhesions cause pain by interfering with the free movement of the spinal nerves and increasing neural sensitivity as a consequence of neural compression. To remove adhesions and deliver injected drugs to target sites, percutaneous epidural adhesiolysis (PEA) is performed in patients who are unresponsive to conservative treatments. We describe four patients who were treated with a newly developed inflatable balloon catheter for more effective PEA and relief of stenosis. In the present patients, treatments with repetitive epidural steroid injection and/or PEA with the Racz catheter or the NaviCath did not yield long-lasting effects or functional improvements. However, PEA and decompression with the inflatable balloon catheter led to maintenance of pain relief for more than seven months and improvements in the functional status with increases in the walking distance. The present case series suggests that the inflatable balloon catheter may be an effective alternative to performing PEA when conventional methods fail to remove adhesions or sufficiently relieve stenosis.

• 센서학회지
• /
• 제24권2호
• /
• pp.113-118
• /
• 2015

Intravenous (IV) infusion set is one of the most common treatment methods applied to hospitalized patients. However, it is necessary to check the injection of IV solution in order to prevent patients from any possible medical injuries. In this paper, using the optical sensors to detect exhaustion of IV solution was proposed. The optical sensor is coplanar structure composed of LED and photodiode which is installed according to focal distance of the lens. These two elements detect exhaustion of IV solution at the desired point conveniently. Through the results of experiments using various wavelength of LED (R.G.B), the blue LED was selected to the optimum light source. The suggested optical sensor can detect exhaustion of IV solution by the differences in the amount of light which is caused by properties such as total reflection, refractive index and scattering. From the implementation, the detector is applicable to both containers of IV solution, glass bottle and plastic pack. And also the result shows apparent differences according to existence of IV solution even if the IV solution color and illumination were changed.

• 디지털융복합연구
• /
• 제19권12호
• /
• pp.145-150
• /
• 2021

공공장소에서 지속적으로 방역을 수행하기 위해서는 인력확보가 쉽지 않은데 자율주행 기반 로봇을 활용하면 인력으로 인한 문제를 해결할 수 있다. 자율주행 기반 방역로봇은 별도의 인력 투입 없이 공공기관과 병원 등의 유해 바이러스 확산 및 질병을 지속적으로 예방 가능하다. 자율주행 기능은 피나클 필터 알고리즘을 적용하여 위치를 추정하고, 방역은 UV살균시스템 및 이산화염소 분사시스템을 적용하였다. 주행시간은 3시간 이상, 위치 오차는 0.5m.이내, 정지 회피하는 기능은 95%, 장애물 감지 거리는 1.5m에서 동작하였다, 자동충전 복구는 배터리 잔량 10%에서 충전거치대로 이동하여 충전이 되었다. 무인방역시스템으로 방역한 결과 인력배치 없이 UV살균은 99%, 이산화염소는 95% 이상 살균되어 막대한 사회적 비용을 절감하는데 자율주행 방역로봇이 기여할 수 있다.

• 한국방사선학회논문지
• /
• 제15권6호
• /
• pp.813-819
• /
• 2021

본 연구에서는 방사성 불소의 인체 내 주입 시 방사선 방호목적으로 사용되는 L-블럭형 방호장비의 차폐율과 주변공간의 선량분포를 몬테칼로 방법을 이용해 계산하였다. L-블럭형 차폐장치의 몸체 및 윈도우 부위의 차폐율은 99.99 %였다. 1 m거리에서 계산한 선량분포는 XZ평면의 135°, 45°, 225°, 315°, 180°에서 상대적으로 높게 나타났고, 0°, 90°, 270°에서는 매우 낮게 계산되었다. YZ평면에서는 135°, 180°, 225°에서 상대적으로 높게 나타났고, 나머지 각도에서는 매우 낮게 계산되었다. AZ와 BZ 평면에서도 YZ평면과 유사한 결과를 나타냈다. 또한 선원의 수평방향과 선원의 상방 45°방향의 선량분포를 통해 225°~315°범위에서 차폐율이 가장 우수함을 확인하였다. 이와 같은 결과가 방사선 작업 종사자들의 방사선 방호에 필요한 기초자료로 활용되기를 기대한다.

• Geomechanics and Engineering
• /
• 제24권2호
• /
• pp.129-141
• /
• 2021

The vacuum preloading method has been used in many countries for soil improvement and land reclamation. However, the treatment time is long and the improvement effect is poor for the straight-line vacuum preloading method. To alleviate such problems, a novel combined air booster and straight-line vacuum preloading method for shallow ground treatment is proposed in this study. Two types of traditional vacuum preloading and combined air booster and straight-line vacuum preloading tests were conducted and monitored in the field. In both tests, the depth of prefabricated vertical drains (PVDs) is 4.5m, the distance between PVDs is 0.8m, and the vacuum preloading time is 60 days. The prominent difference between the two methods is when the preloading time is 45 days, the injection pressure of 250 kPa is adopted for combined air booster and straight-line vacuum preloading test to inject air into the ground. Based on the monitoring data, this paper systematically studied the mechanical parameters, hydraulic conductivity, pore water pressure, settlement and subsoil bearing capacity, as determined by the vane shear strength, to demonstrate that the air-pressurizing system can improve the consolidation. The consolidation time decreased by 15 days, the pore water pressure decreased to 60.49%, and the settlement and vane shear strengths increased by 45.31% and 6.29%, respectively, at the surface. These results demonstrate the validity of the combined air booster and straight-line vacuum preloading method. Compared with the traditional vacuum preloading, the combined air booster and straight-line vacuum preloading method has better reinforcement effect. In addition, an estimation method for evaluating the average degree of consolidation and an empirical formula for evaluating the subsoil bearing capacity are proposed to assist in engineering decision making.

• 동의신경정신과학회지
• /
• 제31권4호
• /
• pp.269-278
• /
• 2020

Objectives: Yukmijihwang-won (Liuweidihuang-wan in Chinese) is a frequently used medicinal herbal formula. It is used as Yin tonic in Korea and China to recover patients from Yin deficiency. However, the scientific evidence on this drug has not revealed the beneficial effect or mechanism of its effects on the neurological disorder. We designed this study to examine the antidepressive and analgesic effects of Yukmijihwang-won (YJ-01) and the minor modification of YJ-01, YJ-06 on the reserpine-induced pain-depression dyad mice model. Methods: Reserpine (1 mg/kg) was administered subcutaneously once a day for three consecutive days to induce pain and depression-like behavior. The oral administration of YJ-01 and YJ-06 (100, 200, or 300 mg/kg) was performed once daily from three days after the reserpine injection. Results: Repeated administration of the YJs significantly reduced the immobility time in a forced swimming test and increased the moved distance and number of crossings in the open field test. In the von-Frey filament test, the oral administration of YJs remarkably suppressed the increase in paw withdrawal frequency. Conclusions: The results of this study suggest that YJ-01 and 06 may be good candidates to treat the pain-depression dyad.

• 대한중풍순환신경학회지
• /
• 제16권1호
• /
• pp.81-88
• /
• 2015

■ Objectives The purpose of this clinical study is to evaluate the effect of Traditional Korean Medicine(KM) on a patient with Tolosa-Hunt syndrome. ■ Methods We treated a 58 years old male patien t with Tolosa-Hunt syndrome who had several clinical symptoms such as ocular pain, limitaion of ocular movement and unilateral ptosis. We used herbal medication, acupuncture, electro-acupuncture(EA), cupping, moxibustion, bee-venom injection. Then we evaluated the improvement by Numerical Rating scale(NRS), Distance of eye opening and ratio of pupil movement. ■ Results We demonstrated the decrease of pain score and improvement of equal ocular movement(EOM) and ptosis after the KM treatment. ■ Conclusion This study proved the effect of KM treatment on Tolosa-Hunt syndrome. It could cooperative treatment would be more effective than mono treatment of western medicine.

• FOCUS: LIFE SCIENCE
• /
• 제1호
• /
• pp.2.1-2.6
• /
• 2024

This article provides detailed instructions for the correct installation, maintenance, and troubleshooting of capillary gas chromatography (GC) columns. It emphasizes the importance of proper installation to ensure optimal performance and longevity of the column. The document covers various aspects such as column trimming, installation, conditioning, testing, storage, and ferrule selection. The installation process involves ensuring that the heated zones of the GC are cool before placing the column cage in the column oven. It is essential to avoid sharp bends or stress on the capillary column during installation and to connect the front end of the column into the GC inlet at the recommended insertion distance. The document also provides guidance on trimming the column, including the use of a ceramic wafer or capillary column cutter to achieve a clean, burr-free cut. For previously used columns, it recommends removing any capillary caps, positioning the nut and ferrule, and trimming 1-2 cm from the column. After installation, the column should be purged with carrier gas to remove any oxygen and avoid oxidizing the column. Conditioning the column involves ramping to the upper isothermal temperature limit and maintaining this temperature for a specified duration. It is crucial to maintain carrier gas flow during conditioning and not exceed the upper temperature limit of the column to avoid phase damage. The document also discusses testing column performance using a suitable method and performing a test injection to assess performance. It provides recommendations for column storage, including flame-sealing the capillary ends or using retention gaps for long-term storage. Additionally, it emphasizes the importance of routine maintenance and replacement of GC consumables to extend the column's lifetime. Ferrule selection is another important aspect covered in the article, with a variety of ferrule materials available for different applications. The characteristics of common ferrule options are presented in a table, including temperature limits, reusability, and suitability for specific detector types.