• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 한국소성가공학회 2001년도 추계학술대회 논문집
• /
• pp.158-161
• /
• 2001

Light guide can be manufactured with a several method dot-screen method, injection method and DSF method. The advantage of DSF method is three-dimensional optical distribution.

• The Korean Journal of Physiology and Pharmacology
• /
• 제8권2호
• /
• pp.89-94
• /
• 2004

The arterial pressure is regulated by the nervous and humoral mechanisms. The neuronal regulation is mostly carried out by the autonomic nervous system through the rostral ventrolateral medulla (RVLM), a key area for the cardiovascular regulation, and the humoral regulation is mediated by a number of substances, including the angiotensin (Ang) II and vasopressin. Recent studies suggest that central interleukin-1 (IL-1) activates the sympathetic nervous system and produces hypertension. The present study was undertaken to elucidate whether IL-1 and Ang II interact in the regulation of cardiovascular responses to the stress of hemorrhage. Thus, Sprague-Dawley rats were anesthetized and both femoral arteries were cannulated for direct measurement of arterial pressure and heart rate (HR) and for inducing hemorrhage. A guide cannula was placed into the lateral ventricle for injection of IL-1 $(0.1,\;1,\;10,\;20\;ng/2\;{\mu}l)$ or Ang II $(600\;ng/10\;{\mu}l)$. A glass microelectrode was inserted into the RVLM to record the single unit spike potential. Barosensitive neurons were identified by an increased number of single unit spikes in RVLM following intravenous injection of nitroprusside. I.c.v. $IL-1\;{\beta}$ increased mean arterial pressure (MAP) in a dose-dependent fashion, but HR in a dose-independent pattern. The baroreceptor reflex sensitivity was not affected by i.c.v. $IL-1\;{\beta}$. Both i.c.v. $IL-1\;{\alpha}\;and\;{\beta}$ produced similar increase in MAP and HR. When hemorrhage was induced after i.c.v. injection of $IL-1\;{\beta}$, the magnitude of MAP fall was not different from the control. The $IL-1\;{\beta}$ group showed a smaller decrease in HR and a lower spike potential count in RVLM than the control. MAP fall in response to hemorrhage after i.c.v. injection of Ang II was not different from the control. When both IL-1 and Ang II were simultaneously injected i.c.v., however, MAP fall was significantly smaller than the control, and HR was increased rather than decreased. These data suggest that IL-1, a defense immune mediator, manifests a hypertensive action in the central nervous system and attenuates the hypotensive response to hemorrhage by interaction with Ang II.

• Journal of the Korea Institute of Building Construction
• /
• 제1권2호
• /
• pp.185-190
• /
• 2001

The purpose of this study is the development of practical Dry floor tile unit method that settle the defect of a wet method and designed for resin mat. With use of PE resin which is confirmed the basic property, it is developed that resin mat, joint-sealing compound with fixed form and space management to Dry floor tile unit method. The result of this study is below. 1) To acquire above the 4kgf/$\textrm{cm}^2$ - construction specification criterion, the bonding space that between resin mat and tile has to occupy the 50% of resin mat module space(10,000$\textrm{cm}^2$). 2) Criteria of bonding part plane is below. simpleness of metal form. productivity, uniform quality after injection molding cooling, easy cutting for remain space management, adhesive property, construction ability, transformation of a severed piece under pressure and so on. 3) To get the shape that could protect the interfacial breakdown, it is designed that resin mat and tile are unified after the bond input. 4) Adapted joint-sealing compound is the material of urethane kinds wedge form. Resin mat has the water passageway that could drain the water. 5) To manage the severed piece of tile, the resin mat is likely to divide the half and the quarter and the plastic drainage is developed in the severed piece.

• Journal of Mechanical Science and Technology
• /
• 제17권1호
• /
• pp.146-156
• /
• 2003

A numerical algorithm is developed to analyze the performance of a Unit-injector (UI) System for a diesel engine. The fundamental theory of the algorithm is based on the continuity equation of fluid dynamics. The loss factors that should be seriously regarded on the continuity equation are the compressibility effect of liquid fuel, the wall friction loss in high-pressure fuel lines of the system, the kinetic energy loss of fuel in the system, and the leakage of fuel out of the control volume. For an evaluation of the developed simulation algorithm, the calculation results are compared with the experimental outputs provided by the Technical Research Center of Doowon Precision Industry Co. (DPICO) ； the maximum pressure in the plunger chamber (P$\_$p/) and total amount of fuel injected into a cylinder per cycle (Q$\_$f/) at each operational condition. The result shows that the average error rate (%) of P$\_$p/ and Q$\_$f/ are 2.90% and 4.87%, respectively, in the specified operational conditions. Hence, it can be concluded that the analytical simulation algorithm developed in this study can be reasonably applied to the performance prediction of newly designed UI system.

• Journal of Internet Computing and Services
• /
• 제9권5호
• /
• pp.23-34
• /
• 2008

The number of web service user is increasing steadily as web-based service is offered in various form. But, web service has a vulnerability such as SQL Injection, Parameter Injection and DoS attack. Therefore, it is required for us to develop Web IDS system and additionally to offer Rule-base intrusion detection/response mechanism against those attacks. However, existing Web IDS system didn't correspond properly on recent web attack mechanism because they didn't including suitable pre-processing procedure on huge web log data. Therfore, we propose an efficient web log pre-processing mechanism for enhancing rule based detection and improving the performance of web IDS base attack response system. Proposed algorithm provides both a field unit parsing and a duplicated string elimination procedure on web log data. And it is also possible for us to construct improved web IDS system.

• Journal of Chest Surgery
• /
• 제29권4호
• /
• pp.414-419
• /
• 1996

To determine the efficacy of OK-432 as pleural sclerosant, we examined the outcomes in 81 patients (age : 27 to 82 years) with malignant pleural effusion and the outcomes in 64 patients ecieving OK-432 3-10KE(1 Klinische Einheit unit) through a chest tube for malignant pleural effusions. Of 81 patients with malignant pleural effusion, 40 patients had lung cancer. Lung cancer is the most frequent cause of malignant pleural effusion in men and women, in which 57 oyo of it was adenocarcinoma. Eighty seven percent of patient had respiratory symptom. Of the 64 patients with intracavitary injection of OK-432 for malignant pleural effusion, 59 patients had a complete short-term response (no fluid reaccumulation during 1 month after intracavitary injection of OK-432). Five patiens of the non-responders had partial control of effusion, with improvement in respiratory symptoms and these patients underwent thoracentesis. Of the 51 patients who survived longer than 1 month, 48 patients did not have re- accumulation of the fluid during follow up. Fever after intracavitary injection of OK-432 was a majors side effect although but that was easily controlled with non-steroidal anti inflammatory drug therapy, Thus the efficacy of intracavitary OK-4)2 injection for malignant pleural effusion was very helpful.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• 제22권2호
• /
• pp.248-255
• /
• 2013

The objective of this study is to optimize the Metal Injection Molding(MIM) process with design of experiments(DOE) and numerical analysis. To derive the optimal process condition, experiment or numerical analysis was performed under various process conditions. To analyze the interaction among influential factors contributing to the temperature at flow front and response surface in MIM, both central point and axial point were added to the full factorial design with 2 levels and 5 factors and then their impacts on response variable in 43 experimental conditions were analyzed and the significance was evaluated. As a result, sprue, runner, and gate were completely filled in about 0.247 seconds after injection, the front part of the green body was filled in about 0.3344 seconds, the green body except gate, etc changed to almost solid state in about 3.29 seconds, the Packinging pressure was completed in about 6.29 seconds, and the green body inside and outside and sprue, etc became solid in 13.2 seconds. The impact of individual or reciprocal action of factors on the temperature at flow front was analyzed through regular probability, test statistics, main effect, and interaction effect. As a result, of a total of 31 combinations of factors, 9 unit factors and reciprocal actions were significant, and the screening was also possible. A proper regression equation was drawn with regression analysis and response surface design on the response variable of temperature at flow front, and the applicability could be verified.

• Journal of Power System Engineering
• /
• 제12권4호
• /
• pp.5-11
• /
• 2008

The RI gasoline engine haying a sub-chamber had a high cycle variation due to the difficulty of the residual gas scavenge in the sub-chamber. To solve this problem and improve the combustion performance of RI engine, we devised a method to inject directly CNG fuel into the sub-chamber. A DI diesel engine of single cylinder was converted into a RI-CNG engine and an electronic control unit for the engine was manufactured. In this study, the combustion characteristics of the RI-CNG engine were investigated with the injection timings and air excess ratios at the load conditions of 50% throttle open rate and 1700rpm. As the results from this study, the RI-CNG engine worked reliably under the condition of the ignitable lean limit of $\lambda=1.7$ by showing the $COV_{imep}$ below about 5%. And the highest thermal efficiency could be obtained in the injection timing that produced the high imep and the low $COV_{imep}$ at the same time. The CO emission concentration indicated very low values and the THC and $NO_x$ showed an opposite pattern. With a view to improving the thermal efficiency and reducing the harmful emissions, the proper control region of the ignition timing and the mixture ratio were nearly ATDC $20^{\circ}\sim50^{\circ}$ and $\lambda=1.4$ respectively.

• Design & Manufacturing
• /
• 제13권1호
• /
• pp.61-67
• /
• 2019

The cooling unit of the industrial showcase consists of a compressor, a condenser and an evaporator. An axial fan is used to circulate the air to improve the efficiency of the heat exchanger. In the past, aluminum fans have been used, which have problems such as low performance, efficiency, high failure rate, and high noise. This study is to develop high performance, high efficiency plastic fan replacing aluminum fan. A major factor in determining the performance and noise of an axial fan is the angle and cross-sectional shape of the blade, which is suitable for raising the lift force, thereby controlling the vortex, which is the main cause of noise and performance degradation. In order to produce a high efficiency injection molded fan, it is necessary to develop a mold that minimizes the deformation of the injection process for the designed shape. In this study, we developed a high efficiency, low noise plastic injection fan with more than 11% performance improvement and noise reduction compared to conventional aluminum fan.

• Journal of Korean Society on Water Environment
• /
• 제37권3호
• /
• pp.168-174
• /
• 2021

Mixing is a very important unit in water treatment process. A mechanical stirring method is generally used for mixing, but recently, the use of pressurized water mixing method (pump diffusion flash mixer) has gained interest because it is more advantageous in terms of mixing time, noise, energy consumption, and maintenance. The following conclusions were obtained from the study of pressurized water mixing method by Computational Fluid Dynamics. Firstly, the mixing degree in the pipe increased as the density of water increased. Secondly, even if the relative velocity between flow rate in the pipe and the pressurized water was constant, the mixing degree decreased as the flow velocity in the pipe increased. Thirdly, the stronger the injection energy the higher the mixing degree. It was also found that the mixing degree was greatly affected by the injection velocity as compared to the injection flow amount. Finally, the required energy to achieve 95% mixing degree at the distance of 10 times diameter in big pipes of 500 mm to 3000 mm was 0.3 to 4.5 kJ. The result of this study could be used in the process design of injection with water purification chemicals, such as, ozone, chlorine, and coagulant.